OpenWrt/openwrt @ 30b950154b54433fb56a4a2e18ff7ea8958a948b

No Description

Jo-Philipp Wich 30b950154b add a new image for the TEW-652BRP which can be used with the bootloader recovery option		15 years ago
docs	73bb52b30b docs: fix a counting fail	15 years ago
include	ead8ab8403 update to the latest stable kernels	15 years ago
package	ca829e805b base-files: disable ipv6 on bridge ports, this prevents stray RA assigned and link local addresses on bridge member devices	15 years ago
scripts	4052849677 switch from ext2 to ext4 (w/o) journaling	15 years ago
target	30b950154b add a new image for the TEW-652BRP which can be used with the bootloader recovery option	15 years ago
toolchain	f21c0cacf8 uClibc: add back a few cflags that were being overwritten, might fix a few segfauls (thx, framer99)	15 years ago
tools	0d69a941a2 tools/pkg-config: update to version 0.25	15 years ago
.gitignore	2c6e2011f8 .gitignore: Undo accidental commit.	15 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	5ea6194ab0 remove 2.6.25 support	15 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	00d1e599d7 add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	15 years ago
README	7c0dea599d remove bison requirement (see [10398] & [14900])	16 years ago
feeds.conf.default	e8d482ab00 switch to LuCI trunk, should be stable enough for common use now	15 years ago
rules.mk	97b3d9688c remove an obsolete comment for the flock template	15 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org