OpenWrt/openwrt @ 399aeeed70bc2b11147a3a2dfdae212e2239192b

No Description

Gabor Juhos 399aeeed70 ar71xx: initialize PCI controller on the Bullet M		16 years ago
docs	615a4d1e45 Add documentation for passphrase option.	16 years ago
include	054c54512f kernel: upgrade to 2.6.30.8 and refresh patches	16 years ago
package	b233445222 busybox: remove empty patches	16 years ago
scripts	6fa03d63d4 getver: get svn rev from last commit so that we have consistent revision numbers between git and svn	16 years ago
target	399aeeed70 ar71xx: initialize PCI controller on the Bullet M	16 years ago
toolchain	737b4b4bcb move EABI config option out of GCC	16 years ago
tools	c30639b1e8 gmp: upgrade to 4.3.1 and fix compile on 64-bit mac os x	16 years ago
.gitignore	13189afcc9 add logs/ to .gitignore	16 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	c9bc7c504c add external toolchain support, enhance native toolchain support (special thanks to Luigi Mantellini for his help... and patience ;)	16 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 years ago
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 years ago
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 years ago
rules.mk	c9bc7c504c add external toolchain support, enhance native toolchain support (special thanks to Luigi Mantellini for his help... and patience ;)	16 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org