OpenWrt/openwrt @ 3f8eaeb2c3ec71ec0c4467b1d58292a5cb727de5

No Description

Travis Kemen 3f8eaeb2c3 This patch adds a number of configuration options to the MadWifi package. You can now configure the HAL, bus, default rate control algorithm as well as the debug mode from within make menuconfig. The goal is to be able to support hardware profiles with different HALs without messing around with the Makefile directly. Signed-off-by: Axel Gembe <[email protected]>		17 years ago
docs	47bf8f89da Fix docs build from a clean checkout, closes #2975	18 years ago
include	7c7bd6f61c This patch makes kernel modules check if config is defined and creates a config passthrough target which will evaluate the original config in the generated package. This is done so kernel modules can have configuration menus like busybox, etc... Signed-off-by: Axel Gembe <[email protected]>	17 years ago
package	3f8eaeb2c3 This patch adds a number of configuration options to the MadWifi package. You can now configure the HAL, bus, default rate control algorithm as well as the debug mode from within make menuconfig. The goal is to be able to support hardware profiles with different HALs without messing around with the Makefile directly. Signed-off-by: Axel Gembe <[email protected]>	17 years ago
scripts	d62feeaac1 add support for the Gateworks Cambria	17 years ago
target	9b340cf3df add proper led support to ifxmips	17 years ago
toolchain	28a650e13a Fix a bug causing an infinite loop in getaddrinfo (closes: #3344)	17 years ago
tools	9b3eedabdb mkzynfw: add definitions for the P-2602HW-D1A	17 years ago
.gitignore	ae65773b46 add package/openwrt-packages to .gitignore	18 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	b64c4c6b40 Update size and inodes of grup image	17 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	585997f8d2 fix package/symlinks target, will call scripts/feeds update / install introduce new package/symlinks-install and package/symlinks-clean targets - package/symlink-install will re-create the index files and the symlinks for all ./feeds (no update from repositories is performed) - package/symlink-clean will delete all installed symlinks (keeping the ./feeds untouched)	18 years ago
README	6f4854e5e5 add information about the tex4ht requirement for the docs	19 years ago
feeds.conf	8daddd9d7b Switched xwrt url in feeds.conf (berlios http falls over occasionally)	18 years ago
rules.mk	7a0b9f1d28 $(TARGET) is not anymore, replace it with $(ARCH) in ./bin/packages subdirectories until we find something better	17 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org