OpenWrt/openwrt @ 43296ea2849d19bbfdd8574e16465dc24b4f59cb

No Description

Florian Fainelli 43296ea284 use 2.4.37.1		16 years ago
docs	adfcd8d468 a couple of small fixes in the Wireless documentation	16 years ago
include	43296ea284 use 2.4.37.1	16 years ago
package	72e25b07b8 correct path to board specific configuration, enable roboswitch driver in wpa_supplicant for brcm-2.4, brcm47xx and brcm63xx	16 years ago
scripts	0fc0346e0a deptest: handle packages from feeds	16 years ago
target	cec852c087 update to 2.4.37, tested on wrt54gs (#4766)	16 years ago
toolchain	23260054dc uClibc 0.9.30.1: fix extra/scripts/unifdef.c like in linux 2.6.28 - nptl does not need this fix, because the problem was fixed upstream already	16 years ago
tools	f6079fbd4b add missing dependency	16 years ago
.gitignore	13189afcc9 add logs/ to .gitignore	16 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	1b216aa20a Add FEATURE ramdisk to be able to select the use of INITRAMFS for a sub-target	17 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	c4d7af7094 added BUILD_LOG_DIR variable, make clean will delete the ./logs dir	16 years ago
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 years ago
feeds.conf.default	62adf51794 feeds.conf.default: Change openwrt feeds urls from https to svn	17 years ago
rules.mk	c4d7af7094 added BUILD_LOG_DIR variable, make clean will delete the ./logs dir	16 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org