OpenWrt/openwrt @ 44eec54c20e721743cb83fcc70e52d00cf02aa94

説明なし

Florian Fainelli 44eec54c20 fix typo in spidev_test category		17 年前
docs	38821210b0 allow mac80211 devices to be configured to do 802.11s, requires iw	17 年前
include	72faa09dff move cflags default setting to target makefiles	17 年前
package	44eec54c20 fix typo in spidev_test category	17 年前
scripts	72faa09dff move cflags default setting to target makefiles	17 年前
target	61dca5a46a orion: fix preselection for ath9k	17 年前
toolchain	6550fbe9b4 nuke some obsolete gcc versions	17 年前
tools	b4644aedce create firmware image for the Ubiquiti LS-SR71 board	17 年前
.gitignore	c6aaa353b1 add feeds.conf to .gitignore	17 年前
BSDmakefile	f30058fda2 add missing copyright header	19 年前
Config.in	6adb2d7d34 add the possibility to put the rootfs to another location (usefull to specify one dedicated NFS export share regardless where in the compute farm the build is done)	17 年前
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 年前
Makefile	882190b198 avoid implicit rules in even more places	17 年前
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 年前
feeds.conf.default	b1af9ddb54 Add desktop and xfce feed to feeds.conf.default	17 年前
rules.mk	72faa09dff move cflags default setting to target makefiles	17 年前

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org