OpenWrt/openwrt @ 488d168c256a76dc96d05b93affc2a466dac99ff

Тайлбар байхгүй

11971 Коммитууд

Felix Fietkau 488d168c25 move ppp ifname fixup from pppoe.sh to ppp.sh, so that it applies to all other ppp based protocols as well		16 жил өмнө
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 жил өмнө
include	3b61c2c2b1 now that $(BOARD) is part of the opkg ARCH, there's no reason to keep the board name around in kmod-* package versions anymore	16 жил өмнө
package	488d168c25 move ppp ifname fixup from pppoe.sh to ppp.sh, so that it applies to all other ppp based protocols as well	16 жил өмнө
scripts	caf8074566 scripts/feeds: fix an error message	16 жил өмнө
target	65fa1debda add infrastructure to register gpio-input reset button	16 жил өмнө
toolchain	91fe363562 uclibc: to rebuild libc.so.0, mklibs.py needs access to libc_so.a which was not exported by default. use it instead of libc_pic.a	16 жил өмнө
tools	8868aa88c8 build fixes for squashfs4 on cygwin	16 жил өмнө
.gitignore	13189afcc9 add logs/ to .gitignore	16 жил өмнө
BSDmakefile	f30058fda2 add missing copyright header	19 жил өмнө
Config.in	e2f5de7a46 add menuconfig option for selecting initramfs compression	16 жил өмнө
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 жил өмнө
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 жил өмнө
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 жил өмнө
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 жил өмнө
rules.mk	2982f7ef79 move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	16 жил өмнө

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org