OpenWrt/openwrt @ 4daa2c31dc93026cdffcd2d7ab85394fba8a7703

Няма описание

19800 Ревизии

Gabor Juhos 4daa2c31dc linux/3.3: add missing config symbols		преди 14 години
docs	6c387521f6 kamikaze has been released long ago	преди 15 години
include	9698a499b6 kernel: update linux 3.2 to 3.2.9	преди 14 години
package	6c61d7cbf1 base-files: remove trailing whitespaces from lib/functions/boot.sh	преди 14 години
scripts	236dd9d9a2 kernel: keep more symbols in the kernel modules when doing profiling	преди 14 години
target	4daa2c31dc linux/3.3: add missing config symbols	преди 14 години
toolchain	a86e168c54 gcc: use .eh_frame sections for exception handling stack unwind - saves about 400 bytes on every executable or shared library	преди 14 години
tools	7a7d39cef3 tools/mtd-utils: fix build error	преди 14 години
.gitignore	98d6f2e1d9 .gitignore: Ignore Emacs editor generated files	преди 14 години
BSDmakefile	f30058fda2 add missing copyright header	преди 19 години
Config.in	d22adb1b06 if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	преди 14 години
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	преди 10 години
Makefile	b81354d828 abort built in prereq target if there is no site config file for the current target	преди 14 години
README	4828e8ff23 trying to make README file a bit more helpful	преди 14 години
feeds.conf.default	ef40c7049a Add xorg feed to feeds.conf.default	преди 14 години
rules.mk	236dd9d9a2 kernel: keep more symbols in the kernel modules when doing profiling	преди 14 години

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org