OpenWrt/openwrt @ 4dbaccf0cd15a80b894baca4659ac38db4cc3ffe

Brak opisu

Felix Fietkau 4dbaccf0cd base-files: allow default value for config_get		16 lat temu
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 lat temu
include	dcd0e4a672 work around a threading bug in mksquashfs4 by limiting the number of threads to 1	16 lat temu
package	4dbaccf0cd base-files: allow default value for config_get	16 lat temu
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 lat temu
target	5138aa203e bcm6345 fixes from AndyI	16 lat temu
toolchain	724307fca1 disable warnings as error in the gdb configuration (#5602)	16 lat temu
tools	36aa20bdab add mklibs (based on a patch by florian) in preparation for optional library symbol stripping	16 lat temu
.gitignore	13189afcc9 add logs/ to .gitignore	17 lat temu
BSDmakefile	f30058fda2 add missing copyright header	19 lat temu
Config.in	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 lat temu
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 lat temu
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	17 lat temu
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 lat temu
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 lat temu
rules.mk	f8097687d1 add -L$(TOOLCHAIN_DIR)/lib to the LIBGCC_S variable, if necessary	16 lat temu

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org