| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657 |
- From 3dcf7b59393812a5fbd83f8cd8d34b94afb4c4d1 Mon Sep 17 00:00:00 2001
- From: Robert Marko <[email protected]>
- Date: Sat, 21 Oct 2023 13:55:18 +0200
- Subject: [PATCH] clk: qcom: gcc-ipq6018: add QUP6 I2C clock
- QUP6 I2C clock is listed in the dt bindings but it was never included in
- the GCC driver.
- So lets add support for it, it is marked as criticial as it is used by RPM
- to communicate to the external PMIC over I2C so this clock must not be
- disabled.
- Signed-off-by: Robert Marko <[email protected]>
- Reviewed-by: Kathiravan Thirumoorthy <[email protected]>
- Reviewed-by: Konrad Dybcio <[email protected]>
- Link: https://lore.kernel.org/r/[email protected]
- Signed-off-by: Bjorn Andersson <[email protected]>
- ---
- drivers/clk/qcom/gcc-ipq6018.c | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
- --- a/drivers/clk/qcom/gcc-ipq6018.c
- +++ b/drivers/clk/qcom/gcc-ipq6018.c
- @@ -2121,6 +2121,26 @@ static struct clk_branch gcc_blsp1_qup5_
- },
- };
-
- +static struct clk_branch gcc_blsp1_qup6_i2c_apps_clk = {
- + .halt_reg = 0x07010,
- + .clkr = {
- + .enable_reg = 0x07010,
- + .enable_mask = BIT(0),
- + .hw.init = &(struct clk_init_data){
- + .name = "gcc_blsp1_qup6_i2c_apps_clk",
- + .parent_hws = (const struct clk_hw *[]){
- + &blsp1_qup6_i2c_apps_clk_src.clkr.hw },
- + .num_parents = 1,
- + /*
- + * RPM uses QUP6 I2C to communicate with the external
- + * PMIC so it must not be disabled.
- + */
- + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
- + .ops = &clk_branch2_ops,
- + },
- + },
- +};
- +
- static struct clk_branch gcc_blsp1_qup6_spi_apps_clk = {
- .halt_reg = 0x0700c,
- .clkr = {
- @@ -4277,6 +4297,7 @@ static struct clk_regmap *gcc_ipq6018_cl
- [GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
- [GCC_BLSP1_QUP5_I2C_APPS_CLK] = &gcc_blsp1_qup5_i2c_apps_clk.clkr,
- [GCC_BLSP1_QUP5_SPI_APPS_CLK] = &gcc_blsp1_qup5_spi_apps_clk.clkr,
- + [GCC_BLSP1_QUP6_I2C_APPS_CLK] = &gcc_blsp1_qup6_i2c_apps_clk.clkr,
- [GCC_BLSP1_QUP6_SPI_APPS_CLK] = &gcc_blsp1_qup6_spi_apps_clk.clkr,
- [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
- [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
|
