OpenWrt/openwrt @ 5df06062655dbf0585e2c90ca0cd8dc68f723c77

Nessuna descrizione

Florian Fainelli 5df0606265 fix typos introduced in 16942		16 anni fa
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 anni fa
include	c3aa860a11 update to 2.6.30.2	16 anni fa
package	998465b1d9 add libsas and mvsas required for VIA NAS7800	16 anni fa
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	17 anni fa
target	5df0606265 fix typos introduced in 16942	16 anni fa
toolchain	c8f178d61a binutils: use 2.19.1 for ppc40x by default	16 anni fa
tools	86d7900724 firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)	16 anni fa
.gitignore	13189afcc9 add logs/ to .gitignore	17 anni fa
BSDmakefile	f30058fda2 add missing copyright header	19 anni fa
Config.in	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 anni fa
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 anni fa
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	17 anni fa
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 anni fa
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	17 anni fa
rules.mk	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 anni fa

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org