OpenWrt/openwrt @ 64ff91f4d5cb613cc97ca0e92fcc66d513668b66

No Description

Mirko Vogt 64ff91f4d5 move <packages/phone> into own feed <feeds/phone> and add entry to <feeds.conf.default>		17 years ago
docs	6fb293c05b document the BUILDONLY option	17 years ago
include	3ca7f3bd6f update to 2.6.27.11	17 years ago
package	51d17e47c2 gdb: upgrade to 6.8, fixes libreadline compilation issues	17 years ago
scripts	435790e112 Fix parsing of password option; set timeout for writing.	17 years ago
target	995fab5d40 use 2.6.27.11 kernel	17 years ago
toolchain	b693945d4f Set default gcc for ps3 - gcc-3.4.6 and gcc-4.1.2 do not work at all	17 years ago
tools	955c501e9a firmware-utils/mkcasfw: fix magic value of the TN-U200 board	17 years ago
.gitignore	c6aaa353b1 add feeds.conf to .gitignore	17 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	eb1c4db039 add support for an optional staging directory for debug binaries	17 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	71e8b3c4f7 remove toolchain build directory as well in 'make dirclean'	17 years ago
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 years ago
feeds.conf.default	64ff91f4d5 move <packages/phone> into own feed <feeds/phone> and add entry to <feeds.conf.default>	17 years ago
rules.mk	eb1c4db039 add support for an optional staging directory for debug binaries	17 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org