OpenWrt/openwrt @ 68219be4e76133e9d3cff8e76d0e66232efbf593

Geen omschrijving

Michael Büsch 68219be4e7 n810: Add fstab for maemo filesystems		15 jaren geleden
docs	73bb52b30b docs: fix a counting fail	15 jaren geleden
include	cb4c39b55d prime .ipk control files with Status: field to introduce hold for post flash installed packages	15 jaren geleden
package	7ee9c3d762 kernel: Move CONFIG_CRYPTO_HW to crypto-core	15 jaren geleden
scripts	adcfdc46e0 feeds: restore previously active feed after install_package(), fixes install all case for packages with inter-feed dependencies	15 jaren geleden
target	68219be4e7 n810: Add fstab for maemo filesystems	15 jaren geleden
toolchain	ffd00db938 gcc: enable non-PIC for mips targets in gcc 4.4+ to reduce code size	15 jaren geleden
tools	3d44120515 mtd-utils: refresh patches again	15 jaren geleden
.gitignore	2c6e2011f8 .gitignore: Undo accidental commit.	15 jaren geleden
BSDmakefile	f30058fda2 add missing copyright header	19 jaren geleden
Config.in	e7c83f6d59 Add support for enabling early printk. Currently only for ARM, because I don't know what EARLY_PRINTK depends on on other architectures.	15 jaren geleden
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 jaren geleden
Makefile	00d1e599d7 add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	15 jaren geleden
README	7c0dea599d remove bison requirement (see [10398] & [14900])	16 jaren geleden
feeds.conf.default	782223d0ff Add lxde feed to feeds.conf.default	15 jaren geleden
rules.mk	19421b6732 drop the usr/ prefix when scanning for libgcc.a	15 jaren geleden

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org