OpenWrt/openwrt @ 6da37f79c5926005459b477a50bcc94e099566bc

No Description

Michael Büsch 6da37f79c5 cmake: Pass VERBOSE=1 to the generated makefile to reveal flags and commands in a verbose openwrt build.		15 years ago
docs	73bb52b30b docs: fix a counting fail	15 years ago
include	6da37f79c5 cmake: Pass VERBOSE=1 to the generated makefile to reveal flags and commands in a verbose openwrt build.	15 years ago
package	97140cecea * reorder patches	15 years ago
scripts	b0359432ae scripts/diffconfig.sh: use the new kconfig mode to remove some more unnecessary entries in the generated output	15 years ago
target	2268dfafd3 * adds ath5k platform support * adds several new profiles	15 years ago
toolchain	247e919223 autodetect ARM variant/ABI setup based on the compiler settings	15 years ago
tools	1fd1ed7373 libtool: fix misspelled procedure name...	15 years ago
.gitignore	cd221dca4b .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	15 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	1ada513817 prepare support for libiconv, libintl stub/full switching	15 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	00d1e599d7 add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	15 years ago
README	7c0dea599d remove bison requirement (see [10398] & [14900])	16 years ago
feeds.conf.default	e8d482ab00 switch to LuCI trunk, should be stable enough for common use now	15 years ago
rules.mk	3052dfbb85 remove support for disabling large file support, it is broken, breaks compatibility to anything and has no effect on most packages	15 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org