OpenWrt/openwrt @ 6e65f0080d362fb47b780cfa36dfcae319feeb2b

Nessuna descrizione

Florian Fainelli 6e65f0080d also use openwrt-specific lzma options in gen_initramfs_list.sh		16 anni fa
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 anni fa
include	e5221c1405 revert 17050 this was not the right way to fix this	16 anni fa
package	0c27222ac4 force iptables to be configured with ipv6 enabled (#5586)	16 anni fa
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	17 anni fa
target	6e65f0080d also use openwrt-specific lzma options in gen_initramfs_list.sh	16 anni fa
toolchain	724307fca1 disable warnings as error in the gdb configuration (#5602)	16 anni fa
tools	8cfbcf0d0b revert r17022, this is not the way to do this	16 anni fa
.gitignore	13189afcc9 add logs/ to .gitignore	17 anni fa
BSDmakefile	f30058fda2 add missing copyright header	19 anni fa
Config.in	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 anni fa
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 anni fa
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	17 anni fa
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 anni fa
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 anni fa
rules.mk	28efbbc87f do not set anything in DISABLE_IPV6 when set, let the package pick up the defaults	16 anni fa

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org