OpenWrt/openwrt @ 798d6757860d5ae00a7125007c12d0abc45a2255

No Description

Florian Fainelli 798d675786 add RTC RV5C386A package		16 years ago
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 years ago
include	9711e6ad55 use board names instead of arch in packages	16 years ago
package	798d675786 add RTC RV5C386A package	16 years ago
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 years ago
target	1da701c04e ASoC: jack: Fix race in snd_soc_jack_add_gpios	16 years ago
toolchain	724307fca1 disable warnings as error in the gdb configuration (#5602)	16 years ago
tools	8cfbcf0d0b revert r17022, this is not the way to do this	16 years ago
.gitignore	13189afcc9 add logs/ to .gitignore	16 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 years ago
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 years ago
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 years ago
rules.mk	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org