OpenWrt/openwrt @ 7d599ee46ce3ea41eb49e8385ff921c1933dfa52

No Description

Felix Fietkau 7d599ee46c mac80211: fix up wds sta mode after r18591		16 years ago
docs	615a4d1e45 Add documentation for passphrase option.	16 years ago
include	d55a046c48 ar71xx: the squashfs-4k images are unreliable in some builds. add 4k, 8k padding to the generic squashfs images and use them on 4k devices as well	16 years ago
package	7d599ee46c mac80211: fix up wds sta mode after r18591	16 years ago
scripts	edeee3ac19 metadata.pl: fix menuconfig code for package features	16 years ago
target	cb85dcb1a8 ar71xx: mask out reserved bits from the dma tx status in the ethernet driver	16 years ago
toolchain	e5e83bf051 fix gcc version selection for octeon	16 years ago
tools	32e3529836 tools: build old squashfs tools for ar71xx	16 years ago
.gitignore	13189afcc9 add logs/ to .gitignore	16 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	0ebb9220a0 make lzo compressed initramfs selectable, too	16 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 years ago
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 years ago
feeds.conf.default	8a7d735404 switch back to LuCI main repo	16 years ago
rules.mk	d648a0827b fix a typo	16 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org