OpenWrt/openwrt @ 7ef6b7451973d0d3fd09014871e7859b6a83fb19

Brak opisu

Felix Fietkau 7ef6b74519 s3c24xx: unbreak uclibc by using armv4t instead of armv4; optimize for the right cpu		17 lat temu
docs	38821210b0 allow mac80211 devices to be configured to do 802.11s, requires iw	17 lat temu
include	1c7a03659c remove autoconf from prereq-build.mk, as it is part of the tools/ build	17 lat temu
package	2c51e3aeb3 Added target architecture name for ps3	17 lat temu
scripts	72faa09dff move cflags default setting to target makefiles	17 lat temu
target	7ef6b74519 s3c24xx: unbreak uclibc by using armv4t instead of armv4; optimize for the right cpu	17 lat temu
toolchain	9f456db3fd Added defaults for extra target architecture for ps3	17 lat temu
tools	b4644aedce create firmware image for the Ubiquiti LS-SR71 board	17 lat temu
.gitignore	c6aaa353b1 add feeds.conf to .gitignore	17 lat temu
BSDmakefile	f30058fda2 add missing copyright header	19 lat temu
Config.in	6adb2d7d34 add the possibility to put the rootfs to another location (usefull to specify one dedicated NFS export share regardless where in the compute farm the build is done)	17 lat temu
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 lat temu
Makefile	882190b198 avoid implicit rules in even more places	17 lat temu
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 lat temu
feeds.conf.default	b1af9ddb54 Add desktop and xfce feed to feeds.conf.default	17 lat temu
rules.mk	72faa09dff move cflags default setting to target makefiles	17 lat temu

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org