OpenWrt/openwrt @ 8aab13b562a7ba4807e3766db1e58bf1d05b8be2

Nessuna descrizione

Felix Fietkau 8aab13b562 madwifi: add some roaming fixes by ubnt		17 anni fa
docs	6145d81d57 Document a bit more about IPv6 configuration	17 anni fa
include	1a013cdca4 2.6.26 final is out	17 anni fa
package	8aab13b562 madwifi: add some roaming fixes by ubnt	17 anni fa
scripts	e0a748c051 generate zImage for the ADI Sidewinder, too	17 anni fa
target	f6ad0deb7b add chip_fixup patch of the platform_nand driver to 2.6.26 as well	17 anni fa
toolchain	f529a37420 surprise :p	17 anni fa
tools	14622d5a08 Use mkfwimage from athero.openwrt.net with modification for XS2 devices. Add back in ubiquiti image generation.	17 anni fa
.gitignore	daa89fdcfc update svn:ignore and .gitignore	17 anni fa
BSDmakefile	f30058fda2 add missing copyright header	19 anni fa
Config.in	c9d9f8045c adds missing patch for native toolchain	17 anni fa
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 anni fa
Makefile	4c665e6ca4 large improvement for parallel builds. works without V=99 now and without warnings. tested with -j on an 2x dual core opteron machine	17 anni fa
README	6f4854e5e5 add information about the tex4ht requirement for the docs	19 anni fa
feeds.conf	4d6ec29824 x-wrt svn repo has moved to http://x-wrt.googlecode.com/svn/trunk/	17 anni fa
rules.mk	958c4eac47 Native toolchain does not support -fhonour-copts, do not add it to the TARGET_CFLAGS	17 anni fa

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org