OpenWrt/openwrt @ 8cb5cc2a79dbf863e6bd186773e70bb95293b0df

説明なし

Gabor Juhos 8cb5cc2a79 use SLUB allocator by default		16 年前
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 年前
include	12b429b3a2 get rid of linux 2.6.29	16 年前
package	5066aab06b kernel/modules: package I2C bus driver for PPC4xx based systems	16 年前
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 年前
target	8cb5cc2a79 use SLUB allocator by default	16 年前
toolchain	c8f178d61a binutils: use 2.19.1 for ppc40x by default	16 年前
tools	86d7900724 firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)	16 年前
.gitignore	13189afcc9 add logs/ to .gitignore	16 年前
BSDmakefile	f30058fda2 add missing copyright header	19 年前
Config.in	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 年前
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 年前
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 年前
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 年前
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 年前
rules.mk	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 年前

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org