Нема описа

Daniel Dickinson 8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. пре 15 година
docs 73bb52b30b docs: fix a counting fail пре 15 година
include c10515db65 re-enable the libtool PKG_BUILD_DEPENDS for PKG_FIXUP and emit a deprecation warning. Packages must specify PKG_BUILD_DEPENDS:=libtool пре 15 година
package 27705d7fcf package/cyassl: update to version 1.6.5 пре 15 година
scripts 3945267a99 scripts/feeds: support checking out git trees with different branches пре 15 година
target 8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. пре 15 година
toolchain 044ea01f9c preliminary support for Freescale MPC85xx based boards пре 15 година
tools 276ef23e4d tools/automake: add symbolic links upto version 1.11.1 пре 15 година
.gitignore cd221dca4b .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default пре 15 година
BSDmakefile f30058fda2 add missing copyright header пре 19 година
Config.in 5ea6194ab0 remove 2.6.25 support пре 15 година
LICENSE 60c1f0f64d finally move buildroot-ng to trunk пре 9 година
Makefile 00d1e599d7 add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point пре 15 година
README 7c0dea599d remove bison requirement (see [10398] & [14900]) пре 16 година
feeds.conf.default e8d482ab00 switch to LuCI trunk, should be stable enough for common use now пре 15 година
rules.mk 97b3d9688c remove an obsolete comment for the flock template пре 15 година

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
Your OpenWrt Project
http://openwrt.org