OpenWrt/openwrt @ 970b4c6a72b4b0e0bfda0587abaee756f0be4afa

Brak opisu

Michael Büsch 970b4c6a72 n810bm: Set minimum voltage threshold to 3200		15 lat temu
docs	73bb52b30b docs: fix a counting fail	15 lat temu
include	7e4a29fbe2 use := instead of = for PKG_CONFIG_PATH to prevent recursion	15 lat temu
package	6ff025f306 ath9k: improve the power save fix by closing another remaining race condition for setting the TIM bit	15 lat temu
scripts	b0359432ae scripts/diffconfig.sh: use the new kconfig mode to remove some more unnecessary entries in the generated output	15 lat temu
target	970b4c6a72 n810bm: Set minimum voltage threshold to 3200	15 lat temu
toolchain	247e919223 autodetect ARM variant/ABI setup based on the compiler settings	15 lat temu
tools	1fd1ed7373 libtool: fix misspelled procedure name...	15 lat temu
.gitignore	cd221dca4b .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	15 lat temu
BSDmakefile	f30058fda2 add missing copyright header	19 lat temu
Config.in	1ada513817 prepare support for libiconv, libintl stub/full switching	15 lat temu
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 lat temu
Makefile	00d1e599d7 add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	15 lat temu
README	7c0dea599d remove bison requirement (see [10398] & [14900])	16 lat temu
feeds.conf.default	e8d482ab00 switch to LuCI trunk, should be stable enough for common use now	15 lat temu
rules.mk	3052dfbb85 remove support for disabling large file support, it is broken, breaks compatibility to anything and has no effect on most packages	15 lat temu

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org