OpenWrt/openwrt @ 97dde3b72d502f4a67eb49ea9c8a6b97ebc54946

Keine Beschreibung

Gabor Juhos 97dde3b72d update to 2.6.28.5		vor 17 Jahren
docs	91f7c80407 wireless.tex: update docs to reflect txpower move	vor 17 Jahren
include	97dde3b72d update to 2.6.28.5	vor 17 Jahren
package	df0643a408 opkg: apparently array bounds checking is gcc 4.3 specific, move -Wno-array-bounds into TARGET_CFLAGS instead of a patch and make it conditional	vor 17 Jahren
scripts	8a253e1ac1 adam2flash: fix 'Interrupted system call' error when flashing (closes: #4490, thanks oliver)	vor 17 Jahren
target	97dde3b72d update to 2.6.28.5	vor 17 Jahren
toolchain	152887e424 fix gcc 4.3.x segfault triggered by using -frename-registers (reproduced on arm, might be relevant for other platforms as well)	vor 17 Jahren
tools	03f3002a17 firmware-utils/mkplanexfw: new firmware generation tool for the Planex MZK-W04NU device	vor 17 Jahren
.gitignore	c6aaa353b1 add feeds.conf to .gitignore	vor 17 Jahren
BSDmakefile	f30058fda2 add missing copyright header	vor 19 Jahren
Config.in	24f02449ff Add menuconfig option for enabling profiling in the kernel.	vor 17 Jahren
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	vor 9 Jahren
Makefile	71e8b3c4f7 remove toolchain build directory as well in 'make dirclean'	vor 17 Jahren
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	vor 17 Jahren
feeds.conf.default	b1af9ddb54 Add desktop and xfce feed to feeds.conf.default	vor 17 Jahren
rules.mk	db059cc0ff remove LINUX_HEADERS_DIR, not used anymore	vor 17 Jahren

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org