Sen descrición

Gabor Juhos 97e641a0e6 ramips: raeth: enable MDIO code for RT3883 %!s(int64=14) %!d(string=hai) anos
docs 6c387521f6 kamikaze has been released long ago %!s(int64=15) %!d(string=hai) anos
include 6959317691 kernel: update linux 3.2 to 3.2.5 %!s(int64=14) %!d(string=hai) anos
package 32247d3d21 package/modules: enable ECHI/OHCI for RT3883 %!s(int64=14) %!d(string=hai) anos
scripts 1a6ccdc0cf patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that %!s(int64=14) %!d(string=hai) anos
target 97e641a0e6 ramips: raeth: enable MDIO code for RT3883 %!s(int64=14) %!d(string=hai) anos
toolchain dcfc40358b gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary %!s(int64=14) %!d(string=hai) anos
tools c2e411fa8d tools/genext2fs: do not include the host getline.h, it breaks the tool in subtle ways, and the source already has a getline replacement %!s(int64=14) %!d(string=hai) anos
.gitignore 98d6f2e1d9 .gitignore: Ignore Emacs editor generated files %!s(int64=14) %!d(string=hai) anos
BSDmakefile f30058fda2 add missing copyright header %!s(int64=19) %!d(string=hai) anos
Config.in d22adb1b06 if CONFIG_BUILD_NLS is selected, compile uClibc with locale support %!s(int64=14) %!d(string=hai) anos
LICENSE 60c1f0f64d finally move buildroot-ng to trunk %!s(int64=9) %!d(string=hai) anos
Makefile b81354d828 abort built in prereq target if there is no site config file for the current target %!s(int64=14) %!d(string=hai) anos
README 4828e8ff23 trying to make README file a bit more helpful %!s(int64=14) %!d(string=hai) anos
feeds.conf.default ef40c7049a Add xorg feed to feeds.conf.default %!s(int64=14) %!d(string=hai) anos
rules.mk 1504738c02 rules.mk: filter "." and "./" entries from $PATH, prevents toolchain build issues and likely other problems %!s(int64=14) %!d(string=hai) anos

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
Your OpenWrt Project
http://openwrt.org