OpenWrt/openwrt @ 995cedb319fd03b2c0d247e112348e756982bbb7

No Description

Michael Büsch 995cedb319 InstallDev: Move the "find" out of the lock critical section.		15 years ago
docs	73bb52b30b docs: fix a counting fail	15 years ago
include	995cedb319 InstallDev: Move the "find" out of the lock critical section.	15 years ago
package	635ec6e7d9 ath9k: fix a few remaining issues in the xmit queue cleanup patch - reduces packet loss under load	15 years ago
scripts	bf274946af deptest: Capitalize failure message. Makes it easier to spot in the logs.	15 years ago
target	9c0c9caaff these belong to the generic config..	15 years ago
toolchain	4cdf723097 switch to uClibc 0.9.31	15 years ago
tools	676520cf65 ensure an empty BUILD_DIR variable is passed down u-boot's makefile	15 years ago
.gitignore	2c6e2011f8 .gitignore: Undo accidental commit.	16 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	8d40973058 make the display support feature flag selectable	15 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 years ago
Makefile	00d1e599d7 add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	15 years ago
README	7c0dea599d remove bison requirement (see [10398] & [14900])	16 years ago
feeds.conf.default	782223d0ff Add lxde feed to feeds.conf.default	15 years ago
rules.mk	97b3d9688c remove an obsolete comment for the flock template	15 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org