OpenWrt/openwrt @ a0829559f874eb433ba26a76dafbc7e0e027e206

Нет описания

Imre Kaloz a0829559f8 upgrade ppc40x to 2.6.30, unify magicbox and openrb board cuimages		16 лет назад
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 лет назад
include	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 лет назад
package	b18a60e1ac lua: introduce soft memory limits that trigger a gc run but do not result in an oom error	16 лет назад
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 лет назад
target	a0829559f8 upgrade ppc40x to 2.6.30, unify magicbox and openrb board cuimages	16 лет назад
toolchain	c8f178d61a binutils: use 2.19.1 for ppc40x by default	16 лет назад
tools	86d7900724 firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)	16 лет назад
.gitignore	13189afcc9 add logs/ to .gitignore	17 лет назад
BSDmakefile	f30058fda2 add missing copyright header	19 лет назад
Config.in	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 лет назад
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 лет назад
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 лет назад
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 лет назад
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 лет назад
rules.mk	11e1304ca0 globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857)	16 лет назад

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org