OpenWrt/openwrt @ a09f80dfdaedb91db6919df2de02b9996835dffd

Ingen beskrivning

John Crispin a09f80dfda add gpio fixes and reset button supportÂ		18 år sedan
docs	d8faf285a8 Allow specifying static IPv6 gateways (#2710)	18 år sedan
include	3c228ee88f add a second parameter to InstallDev/UninstallDev for specifying the path to STAGING_DIR_HOST	18 år sedan
package	34cf8e94c2 add ifx adsl tools	18 år sedan
scripts	7e83cf568a Add the ADAM2 flashing script (#2780)	18 år sedan
target	a09f80dfda add gpio fixes and reset button supportÂ	18 år sedan
toolchain	498a2e3070 added binutils 2.18 selection, Signed-off-by: Robert P. J. Day <[email protected]>	18 år sedan
tools	72a622a193 add libtool to tools/	18 år sedan
.gitignore	e29b73435a add package/feeds to .gitignore	18 år sedan
BSDmakefile	f30058fda2 add missing copyright header	19 år sedan
Config.in	e0a4e2a409 fix rootfs size selection	18 år sedan
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 år sedan
Makefile	edc74f8cc3 fix make clean for unconfigured build trees	18 år sedan
README	6f4854e5e5 add information about the tex4ht requirement for the docs	19 år sedan
feeds.conf	f8dfc57573 add initial version of a package feeds management script	18 år sedan
rules.mk	abf6bfff51 remove $(STAGING_DIR)/usr/bin from $(TARGET_PATH)	18 år sedan

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org