OpenWrt/openwrt @ a25cec813e5137ca2e13857cc247bc30615579b4

بدون توضیح

Florian Fainelli a25cec813e default is to generate a ramdisk image		16 سال پیش
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 سال پیش
include	822615cb6b merge the control file and the .ipk file targets into one to prevent them from going out of sync	16 سال پیش
package	5076142aa3 libpcap: fix kernel version check	16 سال پیش
scripts	ec7621ebf9 add nommu target feature flag	16 سال پیش
target	a25cec813e default is to generate a ramdisk image	16 سال پیش
toolchain	aee9d6c31c add a heavily cleaned up version of ubicom32 toolchain support	16 سال پیش
tools	ec6127c955 update mpfr to 2.4.1	16 سال پیش
.gitignore	13189afcc9 add logs/ to .gitignore	16 سال پیش
BSDmakefile	f30058fda2 add missing copyright header	19 سال پیش
Config.in	e2f5de7a46 add menuconfig option for selecting initramfs compression	16 سال پیش
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 سال پیش
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 سال پیش
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 سال پیش
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 سال پیش
rules.mk	2982f7ef79 move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	16 سال پیش

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org