OpenWrt/openwrt @ b0c855253bee73b431ae150b4ff4aa315bca73b7

Geen omschrijving

Felix Fietkau b0c855253b libnl-tiny: add includedir to pkg-config cflags		13 jaren geleden
docs	9723930be3 docs: update remaining references to functions.sh	13 jaren geleden
include	b21458709a fix ipv4 nat on 3.7 by adding missing iptables modules	13 jaren geleden
package	b0c855253b libnl-tiny: add includedir to pkg-config cflags	13 jaren geleden
scripts	4801705d83 remove support for ubicom32	13 jaren geleden
target	c3cb63661f generic: ar8216: don't use 0 as default VID on AR8327	13 jaren geleden
toolchain	61f19f555f toolchain/musl: simplify musl install steps	13 jaren geleden
tools	cbc3aebcc7 firmware-utils/mktplinkfw: add support for the TL-MR3220 v2	13 jaren geleden
.gitattributes	7fb394b9ab add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	13 jaren geleden
.gitignore	98d6f2e1d9 .gitignore: Ignore Emacs editor generated files	14 jaren geleden
BSDmakefile	f30058fda2 add missing copyright header	19 jaren geleden
Config.in	8cd40b219e build: disable kernel export strip until it is fixed	13 jaren geleden
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 jaren geleden
Makefile	c233a088f0 build: it is no longer necessary to call make target/linux/clean as part of make clean	13 jaren geleden
README	4828e8ff23 trying to make README file a bit more helpful	14 jaren geleden
feeds.conf.default	ef40c7049a Add xorg feed to feeds.conf.default	14 jaren geleden
rules.mk	993ac4600a rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build	13 jaren geleden

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org