OpenWrt/openwrt @ c7d90d3dc43870a939cfb4a2271d7fe01464df58

Nessuna descrizione

11997 Commit

Gabor Juhos c7d90d3dc4 kernel: add md5sum for 2.6.31 final, and refresh 2.6.31 patches		16 anni fa
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 anni fa
include	c7d90d3dc4 kernel: add md5sum for 2.6.31 final, and refresh 2.6.31 patches	16 anni fa
package	a5f80019ef bump some revisions and update copyrights	16 anni fa
scripts	caf8074566 scripts/feeds: fix an error message	16 anni fa
target	c7d90d3dc4 kernel: add md5sum for 2.6.31 final, and refresh 2.6.31 patches	16 anni fa
toolchain	f69f5f0b38 fix wrong description for CONFIG_SSP	16 anni fa
tools	f32f0814b1 firmware-utils: raise the default trx image size limit for something more appropriate for devices with 8M flash	16 anni fa
.gitignore	13189afcc9 add logs/ to .gitignore	16 anni fa
BSDmakefile	f30058fda2 add missing copyright header	19 anni fa
Config.in	f7033929fa add menuconfig option for enabling debugfs support in the kernel	16 anni fa
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 anni fa
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 anni fa
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 anni fa
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 anni fa
rules.mk	2982f7ef79 move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	16 anni fa

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org