OpenWrt/openwrt @ cd64d4ce6e9cedb9172e6b8eda39437244bfa2bc

No Description

Florian Fainelli cd64d4ce6e make patches against iptables apply again after update to 1.4.4 (#5540)		16 years ago
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 years ago
include	7dc435ea29 move the toolchain_install stampfile to the right place to fix spurious missing toolchain errors after cleaning stuff	16 years ago
package	cd64d4ce6e make patches against iptables apply again after update to 1.4.4 (#5540)	16 years ago
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 years ago
target	5ae8e1bf7b Get rid of glamo-lcm-spi. It's not used and probably never will be.	16 years ago
toolchain	2ec0cba393 This patch adds a target for the IBM PowerXCell Accelerator Board. (aka mvXCell-8i from MatrixVision or GigaAccel 180 from Fixstars)	16 years ago
tools	86d7900724 firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)	16 years ago
.gitignore	13189afcc9 add logs/ to .gitignore	16 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 years ago
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 years ago
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 years ago
rules.mk	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org