OpenWrt/openwrt @ cdcb10ee42246ff7df0b7efd28a14a67249e77ff

Тайлбар байхгүй

Gabor Juhos cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards		14 жил өмнө
docs	6c387521f6 kamikaze has been released long ago	15 жил өмнө
include	ad250089aa allow targets to define a default subtarget when using automatic subtarget detection from r27407	14 жил өмнө
package	a92ed1808c firewall: make sure that -m mac is used with --mac-source, follow up to r27508	14 жил өмнө
scripts	ad250089aa allow targets to define a default subtarget when using automatic subtarget detection from r27407	14 жил өмнө
target	cdcb10ee42 ar71xx: add separate profiles for the AP121 and AP121-MINI boards	14 жил өмнө
toolchain	3bdc9093b3 uclibc: backport FTS support	14 жил өмнө
tools	9d980dc121 tools/firmware-utils: add yet another buffalo tool	14 жил өмнө
.gitignore	9c910833fb add vim temp files (*~) to .gitignore	14 жил өмнө
BSDmakefile	f30058fda2 add missing copyright header	19 жил өмнө
Config.in	4551f2bfcc add menuconfig option to enable log files during build process	14 жил өмнө
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 жил өмнө
Makefile	00d1e599d7 add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	15 жил өмнө
README	7c0dea599d remove bison requirement (see [10398] & [14900])	16 жил өмнө
feeds.conf.default	e8d482ab00 switch to LuCI trunk, should be stable enough for common use now	15 жил өмнө
rules.mk	4551f2bfcc add menuconfig option to enable log files during build process	14 жил өмнө

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org