OpenWrt/openwrt @ d8ab910fdcb2b24e0101166ae866781dfd4dcf21

Sin descripción

12 Ramas

Michael Büsch d8ab910fdc Fix spi-gpio MISO handling.		hace 17 años
docs	91f7c80407 wireless.tex: update docs to reflect txpower move	hace 17 años
include	47665da430 update to 2.6.27.17	hace 17 años
package	fc19f3f372 add cp852 code page (#4607)	hace 17 años
scripts	8a253e1ac1 adam2flash: fix 'Interrupted system call' error when flashing (closes: #4490, thanks oliver)	hace 17 años
target	d8ab910fdc Fix spi-gpio MISO handling.	hace 17 años
toolchain	152887e424 fix gcc 4.3.x segfault triggered by using -frename-registers (reproduced on arm, might be relevant for other platforms as well)	hace 17 años
tools	03f3002a17 firmware-utils/mkplanexfw: new firmware generation tool for the Planex MZK-W04NU device	hace 17 años
.gitignore	c6aaa353b1 add feeds.conf to .gitignore	hace 17 años
BSDmakefile	f30058fda2 add missing copyright header	hace 19 años
Config.in	24f02449ff Add menuconfig option for enabling profiling in the kernel.	hace 17 años
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	hace 9 años
Makefile	71e8b3c4f7 remove toolchain build directory as well in 'make dirclean'	hace 17 años
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	hace 17 años
feeds.conf.default	b1af9ddb54 Add desktop and xfce feed to feeds.conf.default	hace 17 años
rules.mk	db059cc0ff remove LINUX_HEADERS_DIR, not used anymore	hace 17 años

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org