OpenWrt/openwrt @ d8e032edef2fb9d1f7aa3b1f96a444f0a1db9696

No Description

Felix Fietkau d8e032edef don't replace powerpc arch with ppc		18 years ago
docs	b58e8c03f2 apply latex style patch posted on openwrt-devel@lists	18 years ago
include	d8e032edef don't replace powerpc arch with ppc	18 years ago
package	c1f0b1fa3f remove madwifi karma patch until it's fixed	18 years ago
scripts	aef9b313b1 remove the dummy profile that was created on targets that have subtargets	18 years ago
target	d8e032edef don't replace powerpc arch with ppc	18 years ago
toolchain	cfd0fecd47 changed the -fhonours-copts gcc patch, such that the function needs to be turned on explicitly	18 years ago
tools	6bf1f9a467 ar7: add eva image generation (thanks Axel Gembe)	18 years ago
.gitignore	e29b73435a add package/feeds to .gitignore	18 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	1a3c4d1090 add possibility to set default .config values	18 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	af03fdb6c5 add autorebuild check for menuconfig	18 years ago
README	6f4854e5e5 add information about the tex4ht requirement for the docs	19 years ago
feeds.conf	f8dfc57573 add initial version of a package feeds management script	18 years ago
rules.mk	9f73ab51f3 refreshed madwifi patches	18 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org