OpenWrt/openwrt @ dd3b2ae8af2bb3d7d7607c8545d2e62d64959aee

بدون توضیح

Gabor Juhos dd3b2ae8af ar71xx: add default network configuration for the Bullet M		16 سال پیش
docs	615a4d1e45 Add documentation for passphrase option.	16 سال پیش
include	054c54512f kernel: upgrade to 2.6.30.8 and refresh patches	16 سال پیش
package	b233445222 busybox: remove empty patches	16 سال پیش
scripts	6fa03d63d4 getver: get svn rev from last commit so that we have consistent revision numbers between git and svn	16 سال پیش
target	dd3b2ae8af ar71xx: add default network configuration for the Bullet M	16 سال پیش
toolchain	737b4b4bcb move EABI config option out of GCC	16 سال پیش
tools	c30639b1e8 gmp: upgrade to 4.3.1 and fix compile on 64-bit mac os x	16 سال پیش
.gitignore	13189afcc9 add logs/ to .gitignore	17 سال پیش
BSDmakefile	f30058fda2 add missing copyright header	19 سال پیش
Config.in	c9bc7c504c add external toolchain support, enhance native toolchain support (special thanks to Luigi Mantellini for his help... and patience ;)	16 سال پیش
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 سال پیش
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	17 سال پیش
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 سال پیش
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 سال پیش
rules.mk	c9bc7c504c add external toolchain support, enhance native toolchain support (special thanks to Luigi Mantellini for his help... and patience ;)	16 سال پیش

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org