OpenWrt/openwrt @ dd3eea99fa76255399ce0eca2a77ee903d2d5caa

Açıklama Yok

Gabor Juhos dd3eea99fa fix phy id on the WP543 board		17 yıl önce
docs	4b5488ebfa Add 802.1x client configuration support and corresponding documentation (#2069)	17 yıl önce
include	3b937f85e8 add default Build/Install template, which is activated by setting PKG_INSTALL=1	17 yıl önce
package	e08253b1c2 change the an openssl sed command to be safe for -Wl,-rpath-link in ldflags	17 yıl önce
scripts	973d7e80d7 fix ./scripts/env for newer git versions	17 yıl önce
target	dd3eea99fa fix phy id on the WP543 board	17 yıl önce
toolchain	799e7a8fa8 disable autorebuild for the toolchain, as it can easily lead to build breakages	17 yıl önce
tools	a6fdbbabdd fix ccache installation (#3942)	17 yıl önce
.gitignore	cc357e82e2 add missing gitignore change for build environments	17 yıl önce
BSDmakefile	f30058fda2 add missing copyright header	19 yıl önce
Config.in	c9d9f8045c adds missing patch for native toolchain	17 yıl önce
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 yıl önce
Makefile	a3a37d0bb1 rework parallel building to get rid of some warnings and add back support for parallelizing the kernel build fixes #3882	17 yıl önce
README	6f4854e5e5 add information about the tex4ht requirement for the docs	19 yıl önce
feeds.conf.default	a74bb3b417 rename feeds.conf to feeds.conf.default, make feeds.conf override feeds.conf.default this makes it possible to change the feeds lists without having the version control system record it as a change	17 yıl önce
rules.mk	6acecfb3cd add -rpath-link to TARGET_LDFLAGS by default	17 yıl önce

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org