OpenWrt/openwrt @ e2193a69c83506ceaddefb2fd3f175059e1b5bcc

Bez popisu

Steven Barth e2193a69c8 odhcp6c: allow IPv6-config via SLAAC-only if no prefix is requested		před 13 roky
docs	9723930be3 docs: update remaining references to functions.sh	před 13 roky
include	562ba537fc kernel: update linux 3.7 to 3.7.5	před 13 roky
package	e2193a69c8 odhcp6c: allow IPv6-config via SLAAC-only if no prefix is requested	před 13 roky
scripts	509f39a10a scripts: bundle-libraries.sh: support mixing 32bit and 64bit binaries	před 13 roky
target	ce8b226046 bcm63xx: replace kmod-switch with swconfig in default package set	před 13 roky
toolchain	fe766227a2 toolchain/gcc: fix the mips64 linker path to be more musl conforming	před 13 roky
tools	2739a19992 adds support for Edimax BR-6524N	před 13 roky
.gitattributes	7fb394b9ab add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	před 13 roky
.gitignore	98d6f2e1d9 .gitignore: Ignore Emacs editor generated files	před 14 roky
BSDmakefile	f30058fda2 add missing copyright header	před 19 roky
Config.in	8b895d1703 allow using sstrip with musl	před 13 roky
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	před 9 roky
Makefile	c233a088f0 build: it is no longer necessary to call make target/linux/clean as part of make clean	před 13 roky
README	4828e8ff23 trying to make README file a bit more helpful	před 14 roky
feeds.conf.default	ef40c7049a Add xorg feed to feeds.conf.default	před 14 roky
rules.mk	236c369a89 rules.mk: only select latest libgcc.a with wildcard match (#12798)	před 13 roky

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org