OpenWrt/openwrt @ e7b83bc22a2838bf68596f79775dfefd31805c07

Ingen beskrivning

Ralph Hempel e7b83bc22a httpd failsafe - add image check and flash access		16 år sedan
docs	615a4d1e45 Add documentation for passphrase option.	16 år sedan
include	4ba18f5916 download.mk: fix bzr download method	16 år sedan
package	e7b83bc22a httpd failsafe - add image check and flash access	16 år sedan
scripts	a1058204d0 rework board detection	16 år sedan
target	6f4052abe0 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <[email protected]>	16 år sedan
toolchain	fb04eb588e toolchain/binutils: building gas for arm-*-uclibc systems requires linking with -lm	16 år sedan
tools	dad85cddac move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it	16 år sedan
.gitignore	2ba1dc7aa7 .gitignore: ignore vim swap files	16 år sedan
BSDmakefile	f30058fda2 add missing copyright header	19 år sedan
Config.in	15fecc9e6c remove support for DEBUG_DIR, it has lost its purpose since STAGING_DIR_ROOT was added	16 år sedan
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 år sedan
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	17 år sedan
README	7c0dea599d remove bison requirement (see [10398] & [14900])	16 år sedan
feeds.conf.default	623e37166c add a src-link example to feeds.conf.default	16 år sedan
rules.mk	18035964c7 fix path to libgcc.a in LIBGCC_S	16 år sedan

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org