OpenWrt/openwrt @ e89dfa6f3cff22f66ace3fbfbdafcee468df5b2d

Нет описания

Gabor Juhos e89dfa6f3c kernel/modules: allow I2C modules to be compiled into the kernel (closes #5702)		16 лет назад
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 лет назад
include	1a63c3347b use 2.4.37.5	16 лет назад
package	e89dfa6f3c kernel/modules: allow I2C modules to be compiled into the kernel (closes #5702)	16 лет назад
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 лет назад
target	e59c6a8af2 refresh patches	16 лет назад
toolchain	5a8a22bdc2 add gcc 4.3.4	16 лет назад
tools	85698765da add support for the Pirelli AG226G board (#5337)	16 лет назад
.gitignore	13189afcc9 add logs/ to .gitignore	16 лет назад
BSDmakefile	f30058fda2 add missing copyright header	19 лет назад
Config.in	bb5a40c64b add an optional config option for stripping all unnecessary symbol exports from the kernel image	16 лет назад
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 лет назад
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 лет назад
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 лет назад
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 лет назад
rules.mk	4169a2e834 add a staging directory for unstripped package files, useful for debugging, will be used for mklibs integration later	16 лет назад

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org