Inicio Explorar Ayuda
Registro Iniciar sesión
OpenWrt
/
openwrt
espejo de https://github.com/openwrt/openwrt.git
2
0
Fork 0
Archivos Incidencias 0 Wiki

Sin descripción

Árbol: e89dfa6f3c
Ramas Etiquetas
openwrt
Gabor Juhos e89dfa6f3c kernel/modules: allow I2C modules to be compiled into the kernel (closes #5702) hace 16 años
docs 254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) hace 16 años
include 1a63c3347b use 2.4.37.5 hace 16 años
package e89dfa6f3c kernel/modules: allow I2C modules to be compiled into the kernel (closes #5702) hace 16 años
scripts 4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. hace 16 años
target e59c6a8af2 refresh patches hace 16 años
toolchain 5a8a22bdc2 add gcc 4.3.4 hace 16 años
tools 85698765da add support for the Pirelli AG226G board (#5337) hace 16 años
.gitignore 13189afcc9 add logs/ to .gitignore hace 16 años
BSDmakefile f30058fda2 add missing copyright header hace 19 años
Config.in bb5a40c64b add an optional config option for stripping all unnecessary symbol exports from the kernel image hace 16 años
LICENSE 60c1f0f64d finally move buildroot-ng to trunk hace 9 años
Makefile 61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh hace 16 años
README adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh hace 17 años
feeds.conf.default aaa0278c46 switch to LuCI 0.9.x branch hace 16 años
rules.mk 4169a2e834 add a staging directory for unstripped package files, useful for debugging, will be used for mklibs integration later hace 16 años

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
Your OpenWrt Project
http://openwrt.org