OpenWrt/openwrt @ e9eb82b33b517f7ea982fc574c910bf84dcc0a18

No Description

Michael Büsch e9eb82b33b Add maintainer information to menuconfig description dialog		15 years ago
docs	73bb52b30b docs: fix a counting fail	15 years ago
include	e9eb82b33b Add maintainer information to menuconfig description dialog	15 years ago
package	1cb2abca8e add maintainer information	15 years ago
scripts	7f80e26661 fix build dependencies on packages with multiple variants but no selected virtual packages	15 years ago
target	cfd47b3740 omap24xx: Add maintainer information	15 years ago
toolchain	ffd00db938 gcc: enable non-PIC for mips targets in gcc 4.4+ to reduce code size	15 years ago
tools	1d855c0890 firmware-utils/mktplinkfw: add support for the TL-MR3420 v1	15 years ago
.gitignore	2c6e2011f8 .gitignore: Undo accidental commit.	15 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	e7c83f6d59 Add support for enabling early printk. Currently only for ARM, because I don't know what EARLY_PRINTK depends on on other architectures.	15 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	00d1e599d7 add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	15 years ago
README	7c0dea599d remove bison requirement (see [10398] & [14900])	16 years ago
feeds.conf.default	782223d0ff Add lxde feed to feeds.conf.default	15 years ago
rules.mk	19421b6732 drop the usr/ prefix when scanning for libgcc.a	15 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org