OpenWrt/openwrt @ f04fcfd801bfcf696629f6aaacadb9fff6a02bbf

Ingen beskrivning

Gabor Juhos f04fcfd801 make irq_chip definitions static		16 år sedan
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 år sedan
include	1981fd14a7 bump to 2.6.29.6 and refresh patches	16 år sedan
package	daaf02e416 wprobe: the bpf code expects direct-access fields to be in big endian, not cpu endian	16 år sedan
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	17 år sedan
target	f04fcfd801 make irq_chip definitions static	16 år sedan
toolchain	c8d103a660 uClibc: fix build error on ARM targets (closes #5473)	16 år sedan
tools	9e94806990 fix segfault when using the maxlen argument (#4359)	16 år sedan
.gitignore	13189afcc9 add logs/ to .gitignore	17 år sedan
BSDmakefile	f30058fda2 add missing copyright header	19 år sedan
Config.in	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 år sedan
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 år sedan
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	17 år sedan
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 år sedan
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	17 år sedan
rules.mk	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 år sedan

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org