OpenWrt/openwrt @ f08684ffc0415425c29e4a4ddc51ddd882bbf5fc

No Description

Felix Fietkau f08684ffc0 mac80211: add missing config override		16 years ago
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 years ago
include	59d130d867 fix multiple ipkg builds of the same arch but with different targets in the same checkout	16 years ago
package	f08684ffc0 mac80211: add missing config override	16 years ago
scripts	7581681466 powerpc: Create a powerpc64 config feature	16 years ago
target	28fae0bccf ps3/petitboot: Run petitboot at first startup	16 years ago
toolchain	d719b51871 pxcab: Replace TARGET_pxcab with feature powerpc64	16 years ago
tools	26b1e0ebe2 disable mpfr tests compilation, slightly speeds up the build process	16 years ago
.gitignore	13189afcc9 add logs/ to .gitignore	16 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	e2f5de7a46 add menuconfig option for selecting initramfs compression	16 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 years ago
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 years ago
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 years ago
rules.mk	2982f7ef79 move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	16 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org