OpenWrt/openwrt @ f31a576cafc3dcecfb60cd7923d8e8449afe7434

Ei kuvausta

Felix Fietkau f31a576caf kernel config: refresh using kconfig.pl		15 vuotta sitten
docs	6c387521f6 kamikaze has been released long ago	15 vuotta sitten
include	9dad83362d kernel: remove imq support, refresh patches	15 vuotta sitten
package	c5a65a0373 Send ipkg-make-index.sh output to stdout	15 vuotta sitten
scripts	3edf9c3544 Never write errors to stdout from ipkg-make-index.sh	15 vuotta sitten
target	f31a576caf kernel config: refresh using kconfig.pl	15 vuotta sitten
toolchain	e733d679a0 remove the CS variant - broken since it's addition	15 vuotta sitten
tools	11c08a39bc tools/e2fsprogs: move uuid/uuid.h into a subdirectory, it conflicts with a system header file with the same name on darwin	15 vuotta sitten
.gitignore	cd221dca4b .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	15 vuotta sitten
BSDmakefile	f30058fda2 add missing copyright header	19 vuotta sitten
Config.in	1ada513817 prepare support for libiconv, libintl stub/full switching	15 vuotta sitten
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 vuotta sitten
Makefile	00d1e599d7 add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	15 vuotta sitten
README	7c0dea599d remove bison requirement (see [10398] & [14900])	16 vuotta sitten
feeds.conf.default	e8d482ab00 switch to LuCI trunk, should be stable enough for common use now	15 vuotta sitten
rules.mk	85c44cafab add a variable LIBRPC to refer to the external librpc if used	15 vuotta sitten

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org