OpenWrt/openwrt @ f4ede912f4a594f1d28691bc35a4e42124829da4

بدون توضیح

Felix Fietkau f4ede912f4 madwifi: remove version selection support		16 سال پیش
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 سال پیش
include	2bb863f337 when regenerating an ipkg package, make sure the entire ipkg build dir is cleaned as well to prevent stale files from making it into the package after configuration changes	16 سال پیش
package	f4ede912f4 madwifi: remove version selection support	16 سال پیش
scripts	7581681466 powerpc: Create a powerpc64 config feature	16 سال پیش
target	d719b51871 pxcab: Replace TARGET_pxcab with feature powerpc64	16 سال پیش
toolchain	d719b51871 pxcab: Replace TARGET_pxcab with feature powerpc64	16 سال پیش
tools	26b1e0ebe2 disable mpfr tests compilation, slightly speeds up the build process	16 سال پیش
.gitignore	13189afcc9 add logs/ to .gitignore	16 سال پیش
BSDmakefile	f30058fda2 add missing copyright header	19 سال پیش
Config.in	e2f5de7a46 add menuconfig option for selecting initramfs compression	16 سال پیش
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 سال پیش
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 سال پیش
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 سال پیش
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 سال پیش
rules.mk	4169a2e834 add a staging directory for unstripped package files, useful for debugging, will be used for mklibs integration later	16 سال پیش

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org