OpenWrt/openwrt @ fa7f32c9622433b7fffd2b6171b27bbfc6320f53

Fără Descriere

Markus Wigge fa7f32c962 upgrade to new upstream version 1.4.4		16 ani în urmă
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 ani în urmă
include	7dc435ea29 move the toolchain_install stampfile to the right place to fix spurious missing toolchain errors after cleaning stuff	16 ani în urmă
package	fa7f32c962 upgrade to new upstream version 1.4.4	16 ani în urmă
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	17 ani în urmă
target	0740df3534 add SND_HRTIMER to 2.6.30/31 kernel configurations (#5180)	16 ani în urmă
toolchain	8324887aa1 binutils: fix build failure on powerpc target	16 ani în urmă
tools	86d7900724 firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)	16 ani în urmă
.gitignore	13189afcc9 add logs/ to .gitignore	17 ani în urmă
BSDmakefile	f30058fda2 add missing copyright header	19 ani în urmă
Config.in	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 ani în urmă
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	10 ani în urmă
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	17 ani în urmă
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 ani în urmă
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 ani în urmă
rules.mk	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 ani în urmă

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org