OpenWrt/openwrt @ faeca86e50f8a8c6ee6fa735f538bd4b586b11c0

Няма описание

19434 Ревизии

Gabor Juhos faeca86e50 ar71xx: support for D-LINK DIR-615 rev. E4		преди 14 години
docs	6c387521f6 kamikaze has been released long ago	преди 15 години
include	b3568b10c2 kernel: update linux 3.2 to 3.2.2	преди 14 години
package	b8f41b051f fix wprobe build for arm on 3.2	преди 14 години
scripts	1a6ccdc0cf patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that	преди 14 години
target	faeca86e50 ar71xx: support for D-LINK DIR-615 rev. E4	преди 14 години
toolchain	0665e400a0 eglibc 2.14 needs our eglibc patchset as well	преди 14 години
tools	478d9fc97e autoconf: another relocatability fix for autom4te, substitute hardcoded prefix with $STAGING_DIR when reading autom4te.cfg	преди 14 години
.gitignore	98d6f2e1d9 .gitignore: Ignore Emacs editor generated files	преди 14 години
BSDmakefile	f30058fda2 add missing copyright header	преди 19 години
Config.in	d22adb1b06 if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	преди 14 години
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	преди 10 години
Makefile	b81354d828 abort built in prereq target if there is no site config file for the current target	преди 14 години
README	4828e8ff23 trying to make README file a bit more helpful	преди 14 години
feeds.conf.default	ef40c7049a Add xorg feed to feeds.conf.default	преди 14 години
rules.mk	1504738c02 rules.mk: filter "." and "./" entries from $PATH, prevents toolchain build issues and likely other problems	преди 14 години

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org