OpenWrt/openwrt @ ffc1fefe2cc6c65407b3e23f116a960c6643abd2

Нет описания

Florian Fainelli ffc1fefe2c set PKGARCH to all for packages in trunk containing only arch-neutral files (#5572)		16 лет назад
docs	254b492ff5 configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450)	16 лет назад
include	a06b20f5b3 fix ip6tables installation against ip6t_HL which has been merged in xt_HL since 2.6.29 (#5568)	16 лет назад
package	ffc1fefe2c set PKGARCH to all for packages in trunk containing only arch-neutral files (#5572)	16 лет назад
scripts	4063d0c93f Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	16 лет назад
target	575239fc40 use ext2/ext3 compiled in to allow booting from an ext2/ext3 formatted sd-card	16 лет назад
toolchain	c8f178d61a binutils: use 2.19.1 for ppc40x by default	16 лет назад
tools	86d7900724 firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)	16 лет назад
.gitignore	13189afcc9 add logs/ to .gitignore	16 лет назад
BSDmakefile	f30058fda2 add missing copyright header	19 лет назад
Config.in	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 лет назад
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 лет назад
Makefile	61f503c77a add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	16 лет назад
README	adfab7c84b change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	17 лет назад
feeds.conf.default	aaa0278c46 switch to LuCI 0.9.x branch	16 лет назад
rules.mk	4702698c68 add a config option to select the binary stripping method to use (between none, strip & sstrip)	16 лет назад

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org