generic: 5.15: backport upstream Aquantia PHY firmware loader patches

Backport merged upstream patch that adds support for firmware loader
from NVMEM or attached filesystem for Aquantia PHYs.

Refresh all kernel patches affected by this change.

Also update the path for aquantia .ko that got moved to dedicated
directory upstream.

Signed-off-by: Christian Marangi <[email protected]>
[rmilecki: port to 5.15]
Signed-off-by: Rafał Miłecki <[email protected]>

package/kernel/linux/modules/netdevices.mk

@@ -380,9 +380,7 @@ define KernelPackage/phy-aquantia
   TITLE:=Aquantia Ethernet PHYs
   DEPENDS:=+kmod-libphy +kmod-hwmon-core +kmod-lib-crc-ccitt
   KCONFIG:=CONFIG_AQUANTIA_PHY
-  FILES:= \
-  $(LINUX_DIR)/drivers/net/phy/[email protected] \
-   $(LINUX_DIR)/drivers/net/phy/aquantia/[email protected]
+  FILES:=$(LINUX_DIR)/drivers/net/phy/aquantia/aquantia.ko
   AUTOLOAD:=$(call AutoLoad,18,aquantia,1)
 endef
 

target/linux/generic/backport-5.15/737-01-v6.7-net-phy-aquantia-move-to-separate-directory.patch

@@ -0,0 +1,2310 @@
+From d2213db3f49bce8e7a87c8de05b9a091f78f654e Mon Sep 17 00:00:00 2001
+From: Christian Marangi <[email protected]>
+Date: Tue, 14 Nov 2023 15:08:41 +0100
+Subject: [PATCH 1/3] net: phy: aquantia: move to separate directory
+
+Move aquantia PHY driver to separate driectory in preparation for
+firmware loading support to keep things tidy.
+
+Signed-off-by: Christian Marangi <[email protected]>
+Reviewed-by: Andrew Lunn <[email protected]>
+Signed-off-by: David S. Miller <[email protected]>
+---
+ drivers/net/phy/Kconfig                         | 5 +----
+ drivers/net/phy/Makefile                        | 6 +-----
+ drivers/net/phy/aquantia/Kconfig                | 5 +++++
+ drivers/net/phy/aquantia/Makefile               | 6 ++++++
+ drivers/net/phy/{ => aquantia}/aquantia.h       | 0
+ drivers/net/phy/{ => aquantia}/aquantia_hwmon.c | 0
+ drivers/net/phy/{ => aquantia}/aquantia_main.c  | 0
+ 7 files changed, 13 insertions(+), 9 deletions(-)
+ create mode 100644 drivers/net/phy/aquantia/Kconfig
+ create mode 100644 drivers/net/phy/aquantia/Makefile
+ rename drivers/net/phy/{ => aquantia}/aquantia.h (100%)
+ rename drivers/net/phy/{ => aquantia}/aquantia_hwmon.c (100%)
+ rename drivers/net/phy/{ => aquantia}/aquantia_main.c (100%)
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -83,10 +83,7 @@ config ADIN_PHY
+ 	  - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
+ 	    Ethernet PHY
+ 
+-config AQUANTIA_PHY
+-	tristate "Aquantia PHYs"
+-	help
+-	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
++source "drivers/net/phy/aquantia/Kconfig"
+ 
+ config AX88796B_PHY
+ 	tristate "Asix PHYs"
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -32,11 +32,7 @@ obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
+ 
+ obj-$(CONFIG_ADIN_PHY)		+= adin.o
+ obj-$(CONFIG_AMD_PHY)		+= amd.o
+-aquantia-objs			+= aquantia_main.o
+-ifdef CONFIG_HWMON
+-aquantia-objs			+= aquantia_hwmon.o
+-endif
+-obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
++obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia/
+ obj-$(CONFIG_AT803X_PHY)	+= at803x.o
+ obj-$(CONFIG_AX88796B_PHY)	+= ax88796b.o
+ obj-$(CONFIG_BCM54140_PHY)	+= bcm54140.o
+--- /dev/null
++++ b/drivers/net/phy/aquantia/Kconfig
+@@ -0,0 +1,5 @@
++# SPDX-License-Identifier: GPL-2.0-only
++config AQUANTIA_PHY
++	tristate "Aquantia PHYs"
++	help
++	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
+--- /dev/null
++++ b/drivers/net/phy/aquantia/Makefile
+@@ -0,0 +1,6 @@
++# SPDX-License-Identifier: GPL-2.0
++aquantia-objs			+= aquantia_main.o
++ifdef CONFIG_HWMON
++aquantia-objs			+= aquantia_hwmon.o
++endif
++obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
+--- a/drivers/net/phy/aquantia.h
++++ /dev/null
+@@ -1,16 +0,0 @@
+-/* SPDX-License-Identifier: GPL-2.0 */
+-/* HWMON driver for Aquantia PHY
+- *
+- * Author: Nikita Yushchenko <[email protected]>
+- * Author: Andrew Lunn <[email protected]>
+- * Author: Heiner Kallweit <[email protected]>
+- */
+-
+-#include <linux/device.h>
+-#include <linux/phy.h>
+-
+-#if IS_REACHABLE(CONFIG_HWMON)
+-int aqr_hwmon_probe(struct phy_device *phydev);
+-#else
+-static inline int aqr_hwmon_probe(struct phy_device *phydev) { return 0; }
+-#endif
+--- /dev/null
++++ b/drivers/net/phy/aquantia/aquantia.h
+@@ -0,0 +1,16 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/* HWMON driver for Aquantia PHY
++ *
++ * Author: Nikita Yushchenko <[email protected]>
++ * Author: Andrew Lunn <[email protected]>
++ * Author: Heiner Kallweit <[email protected]>
++ */
++
++#include <linux/device.h>
++#include <linux/phy.h>
++
++#if IS_REACHABLE(CONFIG_HWMON)
++int aqr_hwmon_probe(struct phy_device *phydev);
++#else
++static inline int aqr_hwmon_probe(struct phy_device *phydev) { return 0; }
++#endif
+--- /dev/null
++++ b/drivers/net/phy/aquantia/aquantia_hwmon.c
+@@ -0,0 +1,250 @@
++// SPDX-License-Identifier: GPL-2.0
++/* HWMON driver for Aquantia PHY
++ *
++ * Author: Nikita Yushchenko <[email protected]>
++ * Author: Andrew Lunn <[email protected]>
++ * Author: Heiner Kallweit <[email protected]>
++ */
++
++#include <linux/phy.h>
++#include <linux/device.h>
++#include <linux/ctype.h>
++#include <linux/hwmon.h>
++
++#include "aquantia.h"
++
++/* Vendor specific 1, MDIO_MMD_VEND2 */
++#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
++#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
++#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
++#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
++#define VEND1_THERMAL_STAT1			0xc820
++#define VEND1_THERMAL_STAT2			0xc821
++#define VEND1_THERMAL_STAT2_VALID		BIT(0)
++#define VEND1_GENERAL_STAT1			0xc830
++#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
++#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
++#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
++#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
++
++#if IS_REACHABLE(CONFIG_HWMON)
++
++static umode_t aqr_hwmon_is_visible(const void *data,
++				    enum hwmon_sensor_types type,
++				    u32 attr, int channel)
++{
++	if (type != hwmon_temp)
++		return 0;
++
++	switch (attr) {
++	case hwmon_temp_input:
++	case hwmon_temp_min_alarm:
++	case hwmon_temp_max_alarm:
++	case hwmon_temp_lcrit_alarm:
++	case hwmon_temp_crit_alarm:
++		return 0444;
++	case hwmon_temp_min:
++	case hwmon_temp_max:
++	case hwmon_temp_lcrit:
++	case hwmon_temp_crit:
++		return 0644;
++	default:
++		return 0;
++	}
++}
++
++static int aqr_hwmon_get(struct phy_device *phydev, int reg, long *value)
++{
++	int temp = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
++
++	if (temp < 0)
++		return temp;
++
++	/* 16 bit value is 2's complement with LSB = 1/256th degree Celsius */
++	*value = (s16)temp * 1000 / 256;
++
++	return 0;
++}
++
++static int aqr_hwmon_set(struct phy_device *phydev, int reg, long value)
++{
++	int temp;
++
++	if (value >= 128000 || value < -128000)
++		return -ERANGE;
++
++	temp = value * 256 / 1000;
++
++	/* temp is in s16 range and we're interested in lower 16 bits only */
++	return phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, (u16)temp);
++}
++
++static int aqr_hwmon_test_bit(struct phy_device *phydev, int reg, int bit)
++{
++	int val = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
++
++	if (val < 0)
++		return val;
++
++	return !!(val & bit);
++}
++
++static int aqr_hwmon_status1(struct phy_device *phydev, int bit, long *value)
++{
++	int val = aqr_hwmon_test_bit(phydev, VEND1_GENERAL_STAT1, bit);
++
++	if (val < 0)
++		return val;
++
++	*value = val;
++
++	return 0;
++}
++
++static int aqr_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
++			  u32 attr, int channel, long *value)
++{
++	struct phy_device *phydev = dev_get_drvdata(dev);
++	int reg;
++
++	if (type != hwmon_temp)
++		return -EOPNOTSUPP;
++
++	switch (attr) {
++	case hwmon_temp_input:
++		reg = aqr_hwmon_test_bit(phydev, VEND1_THERMAL_STAT2,
++					 VEND1_THERMAL_STAT2_VALID);
++		if (reg < 0)
++			return reg;
++		if (!reg)
++			return -EBUSY;
++
++		return aqr_hwmon_get(phydev, VEND1_THERMAL_STAT1, value);
++
++	case hwmon_temp_lcrit:
++		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
++				     value);
++	case hwmon_temp_min:
++		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
++				     value);
++	case hwmon_temp_max:
++		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
++				     value);
++	case hwmon_temp_crit:
++		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
++				     value);
++	case hwmon_temp_lcrit_alarm:
++		return aqr_hwmon_status1(phydev,
++					 VEND1_GENERAL_STAT1_LOW_TEMP_FAIL,
++					 value);
++	case hwmon_temp_min_alarm:
++		return aqr_hwmon_status1(phydev,
++					 VEND1_GENERAL_STAT1_LOW_TEMP_WARN,
++					 value);
++	case hwmon_temp_max_alarm:
++		return aqr_hwmon_status1(phydev,
++					 VEND1_GENERAL_STAT1_HIGH_TEMP_WARN,
++					 value);
++	case hwmon_temp_crit_alarm:
++		return aqr_hwmon_status1(phydev,
++					 VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL,
++					 value);
++	default:
++		return -EOPNOTSUPP;
++	}
++}
++
++static int aqr_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
++			   u32 attr, int channel, long value)
++{
++	struct phy_device *phydev = dev_get_drvdata(dev);
++
++	if (type != hwmon_temp)
++		return -EOPNOTSUPP;
++
++	switch (attr) {
++	case hwmon_temp_lcrit:
++		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
++				     value);
++	case hwmon_temp_min:
++		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
++				     value);
++	case hwmon_temp_max:
++		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
++				     value);
++	case hwmon_temp_crit:
++		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
++				     value);
++	default:
++		return -EOPNOTSUPP;
++	}
++}
++
++static const struct hwmon_ops aqr_hwmon_ops = {
++	.is_visible = aqr_hwmon_is_visible,
++	.read = aqr_hwmon_read,
++	.write = aqr_hwmon_write,
++};
++
++static u32 aqr_hwmon_chip_config[] = {
++	HWMON_C_REGISTER_TZ,
++	0,
++};
++
++static const struct hwmon_channel_info aqr_hwmon_chip = {
++	.type = hwmon_chip,
++	.config = aqr_hwmon_chip_config,
++};
++
++static u32 aqr_hwmon_temp_config[] = {
++	HWMON_T_INPUT |
++	HWMON_T_MAX | HWMON_T_MIN |
++	HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM |
++	HWMON_T_CRIT | HWMON_T_LCRIT |
++	HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM,
++	0,
++};
++
++static const struct hwmon_channel_info aqr_hwmon_temp = {
++	.type = hwmon_temp,
++	.config = aqr_hwmon_temp_config,
++};
++
++static const struct hwmon_channel_info *aqr_hwmon_info[] = {
++	&aqr_hwmon_chip,
++	&aqr_hwmon_temp,
++	NULL,
++};
++
++static const struct hwmon_chip_info aqr_hwmon_chip_info = {
++	.ops = &aqr_hwmon_ops,
++	.info = aqr_hwmon_info,
++};
++
++int aqr_hwmon_probe(struct phy_device *phydev)
++{
++	struct device *dev = &phydev->mdio.dev;
++	struct device *hwmon_dev;
++	char *hwmon_name;
++	int i, j;
++
++	hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
++	if (!hwmon_name)
++		return -ENOMEM;
++
++	for (i = j = 0; hwmon_name[i]; i++) {
++		if (isalnum(hwmon_name[i])) {
++			if (i != j)
++				hwmon_name[j] = hwmon_name[i];
++			j++;
++		}
++	}
++	hwmon_name[j] = '\0';
++
++	hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name,
++					phydev, &aqr_hwmon_chip_info, NULL);
++
++	return PTR_ERR_OR_ZERO(hwmon_dev);
++}
++
++#endif
+--- /dev/null
++++ b/drivers/net/phy/aquantia/aquantia_main.c
+@@ -0,0 +1,844 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Driver for Aquantia PHY
++ *
++ * Author: Shaohui Xie <[email protected]>
++ *
++ * Copyright 2015 Freescale Semiconductor, Inc.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/bitfield.h>
++#include <linux/phy.h>
++
++#include "aquantia.h"
++
++#define PHY_ID_AQ1202	0x03a1b445
++#define PHY_ID_AQ2104	0x03a1b460
++#define PHY_ID_AQR105	0x03a1b4a2
++#define PHY_ID_AQR106	0x03a1b4d0
++#define PHY_ID_AQR107	0x03a1b4e0
++#define PHY_ID_AQCS109	0x03a1b5c2
++#define PHY_ID_AQR405	0x03a1b4b0
++#define PHY_ID_AQR113C	0x31c31c12
++
++#define MDIO_PHYXS_VEND_IF_STATUS		0xe812
++#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
++#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR	0
++#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX	1
++#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI	2
++#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII	3
++#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI	4
++#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII	6
++#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI	7
++#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII	10
++
++#define MDIO_AN_VEND_PROV			0xc400
++#define MDIO_AN_VEND_PROV_1000BASET_FULL	BIT(15)
++#define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
++#define MDIO_AN_VEND_PROV_5000BASET_FULL	BIT(11)
++#define MDIO_AN_VEND_PROV_2500BASET_FULL	BIT(10)
++#define MDIO_AN_VEND_PROV_DOWNSHIFT_EN		BIT(4)
++#define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK	GENMASK(3, 0)
++#define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT	4
++
++#define MDIO_AN_TX_VEND_STATUS1			0xc800
++#define MDIO_AN_TX_VEND_STATUS1_RATE_MASK	GENMASK(3, 1)
++#define MDIO_AN_TX_VEND_STATUS1_10BASET		0
++#define MDIO_AN_TX_VEND_STATUS1_100BASETX	1
++#define MDIO_AN_TX_VEND_STATUS1_1000BASET	2
++#define MDIO_AN_TX_VEND_STATUS1_10GBASET	3
++#define MDIO_AN_TX_VEND_STATUS1_2500BASET	4
++#define MDIO_AN_TX_VEND_STATUS1_5000BASET	5
++#define MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX	BIT(0)
++
++#define MDIO_AN_TX_VEND_INT_STATUS1		0xcc00
++#define MDIO_AN_TX_VEND_INT_STATUS1_DOWNSHIFT	BIT(1)
++
++#define MDIO_AN_TX_VEND_INT_STATUS2		0xcc01
++#define MDIO_AN_TX_VEND_INT_STATUS2_MASK	BIT(0)
++
++#define MDIO_AN_TX_VEND_INT_MASK2		0xd401
++#define MDIO_AN_TX_VEND_INT_MASK2_LINK		BIT(0)
++
++#define MDIO_AN_RX_LP_STAT1			0xe820
++#define MDIO_AN_RX_LP_STAT1_1000BASET_FULL	BIT(15)
++#define MDIO_AN_RX_LP_STAT1_1000BASET_HALF	BIT(14)
++#define MDIO_AN_RX_LP_STAT1_SHORT_REACH		BIT(13)
++#define MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT	BIT(12)
++#define MDIO_AN_RX_LP_STAT1_AQ_PHY		BIT(2)
++
++#define MDIO_AN_RX_LP_STAT4			0xe823
++#define MDIO_AN_RX_LP_STAT4_FW_MAJOR		GENMASK(15, 8)
++#define MDIO_AN_RX_LP_STAT4_FW_MINOR		GENMASK(7, 0)
++
++#define MDIO_AN_RX_VEND_STAT3			0xe832
++#define MDIO_AN_RX_VEND_STAT3_AFR		BIT(0)
++
++/* MDIO_MMD_C22EXT */
++#define MDIO_C22EXT_STAT_SGMII_RX_GOOD_FRAMES		0xd292
++#define MDIO_C22EXT_STAT_SGMII_RX_BAD_FRAMES		0xd294
++#define MDIO_C22EXT_STAT_SGMII_RX_FALSE_CARRIER		0xd297
++#define MDIO_C22EXT_STAT_SGMII_TX_GOOD_FRAMES		0xd313
++#define MDIO_C22EXT_STAT_SGMII_TX_BAD_FRAMES		0xd315
++#define MDIO_C22EXT_STAT_SGMII_TX_FALSE_CARRIER		0xd317
++#define MDIO_C22EXT_STAT_SGMII_TX_COLLISIONS		0xd318
++#define MDIO_C22EXT_STAT_SGMII_TX_LINE_COLLISIONS	0xd319
++#define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR	0xd31a
++#define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES		0xd31b
++
++/* Vendor specific 1, MDIO_MMD_VEND1 */
++#define VEND1_GLOBAL_FW_ID			0x0020
++#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
++#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
++
++#define VEND1_GLOBAL_GEN_STAT2			0xc831
++#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
++
++/* The following registers all have similar layouts; first the registers... */
++#define VEND1_GLOBAL_CFG_10M			0x0310
++#define VEND1_GLOBAL_CFG_100M			0x031b
++#define VEND1_GLOBAL_CFG_1G			0x031c
++#define VEND1_GLOBAL_CFG_2_5G			0x031d
++#define VEND1_GLOBAL_CFG_5G			0x031e
++#define VEND1_GLOBAL_CFG_10G			0x031f
++/* ...and now the fields */
++#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
++#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
++#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
++#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
++
++#define VEND1_GLOBAL_RSVD_STAT1			0xc885
++#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
++#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
++
++#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
++#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
++#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
++
++#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
++#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
++
++#define VEND1_GLOBAL_INT_STD_MASK		0xff00
++#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
++#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
++#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
++#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
++#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
++#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
++#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
++#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
++#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
++#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
++#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
++
++#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
++#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
++#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
++#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
++#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
++#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
++#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
++#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
++#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
++
++/* Sleep and timeout for checking if the Processor-Intensive
++ * MDIO operation is finished
++ */
++#define AQR107_OP_IN_PROG_SLEEP		1000
++#define AQR107_OP_IN_PROG_TIMEOUT	100000
++
++struct aqr107_hw_stat {
++	const char *name;
++	int reg;
++	int size;
++};
++
++#define SGMII_STAT(n, r, s) { n, MDIO_C22EXT_STAT_SGMII_ ## r, s }
++static const struct aqr107_hw_stat aqr107_hw_stats[] = {
++	SGMII_STAT("sgmii_rx_good_frames",	    RX_GOOD_FRAMES,	26),
++	SGMII_STAT("sgmii_rx_bad_frames",	    RX_BAD_FRAMES,	26),
++	SGMII_STAT("sgmii_rx_false_carrier_events", RX_FALSE_CARRIER,	 8),
++	SGMII_STAT("sgmii_tx_good_frames",	    TX_GOOD_FRAMES,	26),
++	SGMII_STAT("sgmii_tx_bad_frames",	    TX_BAD_FRAMES,	26),
++	SGMII_STAT("sgmii_tx_false_carrier_events", TX_FALSE_CARRIER,	 8),
++	SGMII_STAT("sgmii_tx_collisions",	    TX_COLLISIONS,	 8),
++	SGMII_STAT("sgmii_tx_line_collisions",	    TX_LINE_COLLISIONS,	 8),
++	SGMII_STAT("sgmii_tx_frame_alignment_err",  TX_FRAME_ALIGN_ERR,	16),
++	SGMII_STAT("sgmii_tx_runt_frames",	    TX_RUNT_FRAMES,	22),
++};
++#define AQR107_SGMII_STAT_SZ ARRAY_SIZE(aqr107_hw_stats)
++
++struct aqr107_priv {
++	u64 sgmii_stats[AQR107_SGMII_STAT_SZ];
++};
++
++static int aqr107_get_sset_count(struct phy_device *phydev)
++{
++	return AQR107_SGMII_STAT_SZ;
++}
++
++static void aqr107_get_strings(struct phy_device *phydev, u8 *data)
++{
++	int i;
++
++	for (i = 0; i < AQR107_SGMII_STAT_SZ; i++)
++		strscpy(data + i * ETH_GSTRING_LEN, aqr107_hw_stats[i].name,
++			ETH_GSTRING_LEN);
++}
++
++static u64 aqr107_get_stat(struct phy_device *phydev, int index)
++{
++	const struct aqr107_hw_stat *stat = aqr107_hw_stats + index;
++	int len_l = min(stat->size, 16);
++	int len_h = stat->size - len_l;
++	u64 ret;
++	int val;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg);
++	if (val < 0)
++		return U64_MAX;
++
++	ret = val & GENMASK(len_l - 1, 0);
++	if (len_h) {
++		val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg + 1);
++		if (val < 0)
++			return U64_MAX;
++
++		ret += (val & GENMASK(len_h - 1, 0)) << 16;
++	}
++
++	return ret;
++}
++
++static void aqr107_get_stats(struct phy_device *phydev,
++			     struct ethtool_stats *stats, u64 *data)
++{
++	struct aqr107_priv *priv = phydev->priv;
++	u64 val;
++	int i;
++
++	for (i = 0; i < AQR107_SGMII_STAT_SZ; i++) {
++		val = aqr107_get_stat(phydev, i);
++		if (val == U64_MAX)
++			phydev_err(phydev, "Reading HW Statistics failed for %s\n",
++				   aqr107_hw_stats[i].name);
++		else
++			priv->sgmii_stats[i] += val;
++
++		data[i] = priv->sgmii_stats[i];
++	}
++}
++
++static int aqr_config_aneg(struct phy_device *phydev)
++{
++	bool changed = false;
++	u16 reg;
++	int ret;
++
++	if (phydev->autoneg == AUTONEG_DISABLE)
++		return genphy_c45_pma_setup_forced(phydev);
++
++	ret = genphy_c45_an_config_aneg(phydev);
++	if (ret < 0)
++		return ret;
++	if (ret > 0)
++		changed = true;
++
++	/* Clause 45 has no standardized support for 1000BaseT, therefore
++	 * use vendor registers for this mode.
++	 */
++	reg = 0;
++	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
++			      phydev->advertising))
++		reg |= MDIO_AN_VEND_PROV_1000BASET_FULL;
++
++	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
++			      phydev->advertising))
++		reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
++
++	/* Handle the case when the 2.5G and 5G speeds are not advertised */
++	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
++			      phydev->advertising))
++		reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
++
++	if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
++			      phydev->advertising))
++		reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
++
++	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
++				     MDIO_AN_VEND_PROV_1000BASET_HALF |
++				     MDIO_AN_VEND_PROV_1000BASET_FULL |
++				     MDIO_AN_VEND_PROV_2500BASET_FULL |
++				     MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
++	if (ret < 0)
++		return ret;
++	if (ret > 0)
++		changed = true;
++
++	return genphy_c45_check_and_restart_aneg(phydev, changed);
++}
++
++static int aqr_config_intr(struct phy_device *phydev)
++{
++	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
++	int err;
++
++	if (en) {
++		/* Clear any pending interrupts before enabling them */
++		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
++		if (err < 0)
++			return err;
++	}
++
++	err = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_MASK2,
++			    en ? MDIO_AN_TX_VEND_INT_MASK2_LINK : 0);
++	if (err < 0)
++		return err;
++
++	err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_STD_MASK,
++			    en ? VEND1_GLOBAL_INT_STD_MASK_ALL : 0);
++	if (err < 0)
++		return err;
++
++	err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_VEND_MASK,
++			    en ? VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 |
++			    VEND1_GLOBAL_INT_VEND_MASK_AN : 0);
++	if (err < 0)
++		return err;
++
++	if (!en) {
++		/* Clear any pending interrupts after we have disabled them */
++		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
++		if (err < 0)
++			return err;
++	}
++
++	return 0;
++}
++
++static irqreturn_t aqr_handle_interrupt(struct phy_device *phydev)
++{
++	int irq_status;
++
++	irq_status = phy_read_mmd(phydev, MDIO_MMD_AN,
++				  MDIO_AN_TX_VEND_INT_STATUS2);
++	if (irq_status < 0) {
++		phy_error(phydev);
++		return IRQ_NONE;
++	}
++
++	if (!(irq_status & MDIO_AN_TX_VEND_INT_STATUS2_MASK))
++		return IRQ_NONE;
++
++	phy_trigger_machine(phydev);
++
++	return IRQ_HANDLED;
++}
++
++static int aqr_read_status(struct phy_device *phydev)
++{
++	int val;
++
++	if (phydev->autoneg == AUTONEG_ENABLE) {
++		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
++		if (val < 0)
++			return val;
++
++		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
++				 phydev->lp_advertising,
++				 val & MDIO_AN_RX_LP_STAT1_1000BASET_FULL);
++		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
++				 phydev->lp_advertising,
++				 val & MDIO_AN_RX_LP_STAT1_1000BASET_HALF);
++	}
++
++	return genphy_c45_read_status(phydev);
++}
++
++static int aqr107_read_rate(struct phy_device *phydev)
++{
++	u32 config_reg;
++	int val;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_STATUS1);
++	if (val < 0)
++		return val;
++
++	if (val & MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX)
++		phydev->duplex = DUPLEX_FULL;
++	else
++		phydev->duplex = DUPLEX_HALF;
++
++	switch (FIELD_GET(MDIO_AN_TX_VEND_STATUS1_RATE_MASK, val)) {
++	case MDIO_AN_TX_VEND_STATUS1_10BASET:
++		phydev->speed = SPEED_10;
++		config_reg = VEND1_GLOBAL_CFG_10M;
++		break;
++	case MDIO_AN_TX_VEND_STATUS1_100BASETX:
++		phydev->speed = SPEED_100;
++		config_reg = VEND1_GLOBAL_CFG_100M;
++		break;
++	case MDIO_AN_TX_VEND_STATUS1_1000BASET:
++		phydev->speed = SPEED_1000;
++		config_reg = VEND1_GLOBAL_CFG_1G;
++		break;
++	case MDIO_AN_TX_VEND_STATUS1_2500BASET:
++		phydev->speed = SPEED_2500;
++		config_reg = VEND1_GLOBAL_CFG_2_5G;
++		break;
++	case MDIO_AN_TX_VEND_STATUS1_5000BASET:
++		phydev->speed = SPEED_5000;
++		config_reg = VEND1_GLOBAL_CFG_5G;
++		break;
++	case MDIO_AN_TX_VEND_STATUS1_10GBASET:
++		phydev->speed = SPEED_10000;
++		config_reg = VEND1_GLOBAL_CFG_10G;
++		break;
++	default:
++		phydev->speed = SPEED_UNKNOWN;
++		return 0;
++	}
++
++	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, config_reg);
++	if (val < 0)
++		return val;
++
++	if (FIELD_GET(VEND1_GLOBAL_CFG_RATE_ADAPT, val) ==
++	    VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE)
++		phydev->rate_matching = RATE_MATCH_PAUSE;
++	else
++		phydev->rate_matching = RATE_MATCH_NONE;
++
++	return 0;
++}
++
++static int aqr107_read_status(struct phy_device *phydev)
++{
++	int val, ret;
++
++	ret = aqr_read_status(phydev);
++	if (ret)
++		return ret;
++
++	if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE)
++		return 0;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_IF_STATUS);
++	if (val < 0)
++		return val;
++
++	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
++	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
++		phydev->interface = PHY_INTERFACE_MODE_10GKR;
++		break;
++	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
++		phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
++		break;
++	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
++		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
++		break;
++	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
++		phydev->interface = PHY_INTERFACE_MODE_USXGMII;
++		break;
++	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
++		phydev->interface = PHY_INTERFACE_MODE_XAUI;
++		break;
++	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
++		phydev->interface = PHY_INTERFACE_MODE_SGMII;
++		break;
++	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
++		phydev->interface = PHY_INTERFACE_MODE_RXAUI;
++		break;
++	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
++		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
++		break;
++	default:
++		phydev->interface = PHY_INTERFACE_MODE_NA;
++		break;
++	}
++
++	/* Read possibly downshifted rate from vendor register */
++	return aqr107_read_rate(phydev);
++}
++
++static int aqr107_get_downshift(struct phy_device *phydev, u8 *data)
++{
++	int val, cnt, enable;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV);
++	if (val < 0)
++		return val;
++
++	enable = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_EN, val);
++	cnt = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
++
++	*data = enable && cnt ? cnt : DOWNSHIFT_DEV_DISABLE;
++
++	return 0;
++}
++
++static int aqr107_set_downshift(struct phy_device *phydev, u8 cnt)
++{
++	int val = 0;
++
++	if (!FIELD_FIT(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt))
++		return -E2BIG;
++
++	if (cnt != DOWNSHIFT_DEV_DISABLE) {
++		val = MDIO_AN_VEND_PROV_DOWNSHIFT_EN;
++		val |= FIELD_PREP(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt);
++	}
++
++	return phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
++			      MDIO_AN_VEND_PROV_DOWNSHIFT_EN |
++			      MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
++}
++
++static int aqr107_get_tunable(struct phy_device *phydev,
++			      struct ethtool_tunable *tuna, void *data)
++{
++	switch (tuna->id) {
++	case ETHTOOL_PHY_DOWNSHIFT:
++		return aqr107_get_downshift(phydev, data);
++	default:
++		return -EOPNOTSUPP;
++	}
++}
++
++static int aqr107_set_tunable(struct phy_device *phydev,
++			      struct ethtool_tunable *tuna, const void *data)
++{
++	switch (tuna->id) {
++	case ETHTOOL_PHY_DOWNSHIFT:
++		return aqr107_set_downshift(phydev, *(const u8 *)data);
++	default:
++		return -EOPNOTSUPP;
++	}
++}
++
++/* If we configure settings whilst firmware is still initializing the chip,
++ * then these settings may be overwritten. Therefore make sure chip
++ * initialization has completed. Use presence of the firmware ID as
++ * indicator for initialization having completed.
++ * The chip also provides a "reset completed" bit, but it's cleared after
++ * read. Therefore function would time out if called again.
++ */
++static int aqr107_wait_reset_complete(struct phy_device *phydev)
++{
++	int val;
++
++	return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
++					 VEND1_GLOBAL_FW_ID, val, val != 0,
++					 20000, 2000000, false);
++}
++
++static void aqr107_chip_info(struct phy_device *phydev)
++{
++	u8 fw_major, fw_minor, build_id, prov_id;
++	int val;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
++	if (val < 0)
++		return;
++
++	fw_major = FIELD_GET(VEND1_GLOBAL_FW_ID_MAJOR, val);
++	fw_minor = FIELD_GET(VEND1_GLOBAL_FW_ID_MINOR, val);
++
++	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT1);
++	if (val < 0)
++		return;
++
++	build_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID, val);
++	prov_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_PROV_ID, val);
++
++	phydev_dbg(phydev, "FW %u.%u, Build %u, Provisioning %u\n",
++		   fw_major, fw_minor, build_id, prov_id);
++}
++
++static int aqr107_config_init(struct phy_device *phydev)
++{
++	int ret;
++
++	/* Check that the PHY interface type is compatible */
++	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
++	    phydev->interface != PHY_INTERFACE_MODE_1000BASEKX &&
++	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
++	    phydev->interface != PHY_INTERFACE_MODE_XGMII &&
++	    phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
++	    phydev->interface != PHY_INTERFACE_MODE_10GKR &&
++	    phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
++	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
++	    phydev->interface != PHY_INTERFACE_MODE_RXAUI)
++		return -ENODEV;
++
++	WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,
++	     "Your devicetree is out of date, please update it. The AQR107 family doesn't support XGMII, maybe you mean USXGMII.\n");
++
++	ret = aqr107_wait_reset_complete(phydev);
++	if (!ret)
++		aqr107_chip_info(phydev);
++
++	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
++}
++
++static int aqcs109_config_init(struct phy_device *phydev)
++{
++	int ret;
++
++	/* Check that the PHY interface type is compatible */
++	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
++	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX)
++		return -ENODEV;
++
++	ret = aqr107_wait_reset_complete(phydev);
++	if (!ret)
++		aqr107_chip_info(phydev);
++
++	/* AQCS109 belongs to a chip family partially supporting 10G and 5G.
++	 * PMA speed ability bits are the same for all members of the family,
++	 * AQCS109 however supports speeds up to 2.5G only.
++	 */
++	ret = phy_set_max_speed(phydev, SPEED_2500);
++	if (ret)
++		return ret;
++
++	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
++}
++
++static void aqr107_link_change_notify(struct phy_device *phydev)
++{
++	u8 fw_major, fw_minor;
++	bool downshift, short_reach, afr;
++	int mode, val;
++
++	if (phydev->state != PHY_RUNNING || phydev->autoneg == AUTONEG_DISABLE)
++		return;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
++	/* call failed or link partner is no Aquantia PHY */
++	if (val < 0 || !(val & MDIO_AN_RX_LP_STAT1_AQ_PHY))
++		return;
++
++	short_reach = val & MDIO_AN_RX_LP_STAT1_SHORT_REACH;
++	downshift = val & MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT4);
++	if (val < 0)
++		return;
++
++	fw_major = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MAJOR, val);
++	fw_minor = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MINOR, val);
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_VEND_STAT3);
++	if (val < 0)
++		return;
++
++	afr = val & MDIO_AN_RX_VEND_STAT3_AFR;
++
++	phydev_dbg(phydev, "Link partner is Aquantia PHY, FW %u.%u%s%s%s\n",
++		   fw_major, fw_minor,
++		   short_reach ? ", short reach mode" : "",
++		   downshift ? ", fast-retrain downshift advertised" : "",
++		   afr ? ", fast reframe advertised" : "");
++
++	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT9);
++	if (val < 0)
++		return;
++
++	mode = FIELD_GET(VEND1_GLOBAL_RSVD_STAT9_MODE, val);
++	if (mode == VEND1_GLOBAL_RSVD_STAT9_1000BT2)
++		phydev_info(phydev, "Aquantia 1000Base-T2 mode active\n");
++}
++
++static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
++{
++	int val, err;
++
++	/* The datasheet notes to wait at least 1ms after issuing a
++	 * processor intensive operation before checking.
++	 * We cannot use the 'sleep_before_read' parameter of read_poll_timeout
++	 * because that just determines the maximum time slept, not the minimum.
++	 */
++	usleep_range(1000, 5000);
++
++	err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
++					VEND1_GLOBAL_GEN_STAT2, val,
++					!(val & VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG),
++					AQR107_OP_IN_PROG_SLEEP,
++					AQR107_OP_IN_PROG_TIMEOUT, false);
++	if (err) {
++		phydev_err(phydev, "timeout: processor-intensive MDIO operation\n");
++		return err;
++	}
++
++	return 0;
++}
++
++static int aqr107_get_rate_matching(struct phy_device *phydev,
++				    phy_interface_t iface)
++{
++	if (iface == PHY_INTERFACE_MODE_10GBASER ||
++	    iface == PHY_INTERFACE_MODE_2500BASEX ||
++	    iface == PHY_INTERFACE_MODE_NA)
++		return RATE_MATCH_PAUSE;
++	return RATE_MATCH_NONE;
++}
++
++static int aqr107_suspend(struct phy_device *phydev)
++{
++	int err;
++
++	err = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1,
++			       MDIO_CTRL1_LPOWER);
++	if (err)
++		return err;
++
++	return aqr107_wait_processor_intensive_op(phydev);
++}
++
++static int aqr107_resume(struct phy_device *phydev)
++{
++	int err;
++
++	err = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1,
++				 MDIO_CTRL1_LPOWER);
++	if (err)
++		return err;
++
++	return aqr107_wait_processor_intensive_op(phydev);
++}
++
++static int aqr107_probe(struct phy_device *phydev)
++{
++	phydev->priv = devm_kzalloc(&phydev->mdio.dev,
++				    sizeof(struct aqr107_priv), GFP_KERNEL);
++	if (!phydev->priv)
++		return -ENOMEM;
++
++	return aqr_hwmon_probe(phydev);
++}
++
++static struct phy_driver aqr_driver[] = {
++{
++	PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
++	.name		= "Aquantia AQ1202",
++	.config_aneg    = aqr_config_aneg,
++	.config_intr	= aqr_config_intr,
++	.handle_interrupt = aqr_handle_interrupt,
++	.read_status	= aqr_read_status,
++},
++{
++	PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
++	.name		= "Aquantia AQ2104",
++	.config_aneg    = aqr_config_aneg,
++	.config_intr	= aqr_config_intr,
++	.handle_interrupt = aqr_handle_interrupt,
++	.read_status	= aqr_read_status,
++},
++{
++	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
++	.name		= "Aquantia AQR105",
++	.config_aneg    = aqr_config_aneg,
++	.config_intr	= aqr_config_intr,
++	.handle_interrupt = aqr_handle_interrupt,
++	.read_status	= aqr_read_status,
++	.suspend	= aqr107_suspend,
++	.resume		= aqr107_resume,
++},
++{
++	PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
++	.name		= "Aquantia AQR106",
++	.config_aneg    = aqr_config_aneg,
++	.config_intr	= aqr_config_intr,
++	.handle_interrupt = aqr_handle_interrupt,
++	.read_status	= aqr_read_status,
++},
++{
++	PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
++	.name		= "Aquantia AQR107",
++	.probe		= aqr107_probe,
++	.get_rate_matching = aqr107_get_rate_matching,
++	.config_init	= aqr107_config_init,
++	.config_aneg    = aqr_config_aneg,
++	.config_intr	= aqr_config_intr,
++	.handle_interrupt = aqr_handle_interrupt,
++	.read_status	= aqr107_read_status,
++	.get_tunable    = aqr107_get_tunable,
++	.set_tunable    = aqr107_set_tunable,
++	.suspend	= aqr107_suspend,
++	.resume		= aqr107_resume,
++	.get_sset_count	= aqr107_get_sset_count,
++	.get_strings	= aqr107_get_strings,
++	.get_stats	= aqr107_get_stats,
++	.link_change_notify = aqr107_link_change_notify,
++},
++{
++	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
++	.name		= "Aquantia AQCS109",
++	.probe		= aqr107_probe,
++	.get_rate_matching = aqr107_get_rate_matching,
++	.config_init	= aqcs109_config_init,
++	.config_aneg    = aqr_config_aneg,
++	.config_intr	= aqr_config_intr,
++	.handle_interrupt = aqr_handle_interrupt,
++	.read_status	= aqr107_read_status,
++	.get_tunable    = aqr107_get_tunable,
++	.set_tunable    = aqr107_set_tunable,
++	.suspend	= aqr107_suspend,
++	.resume		= aqr107_resume,
++	.get_sset_count	= aqr107_get_sset_count,
++	.get_strings	= aqr107_get_strings,
++	.get_stats	= aqr107_get_stats,
++	.link_change_notify = aqr107_link_change_notify,
++},
++{
++	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
++	.name		= "Aquantia AQR405",
++	.config_aneg    = aqr_config_aneg,
++	.config_intr	= aqr_config_intr,
++	.handle_interrupt = aqr_handle_interrupt,
++	.read_status	= aqr_read_status,
++},
++{
++	PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
++	.name           = "Aquantia AQR113C",
++	.probe          = aqr107_probe,
++	.get_rate_matching = aqr107_get_rate_matching,
++	.config_init    = aqr107_config_init,
++	.config_aneg    = aqr_config_aneg,
++	.config_intr    = aqr_config_intr,
++	.handle_interrupt       = aqr_handle_interrupt,
++	.read_status    = aqr107_read_status,
++	.get_tunable    = aqr107_get_tunable,
++	.set_tunable    = aqr107_set_tunable,
++	.suspend        = aqr107_suspend,
++	.resume         = aqr107_resume,
++	.get_sset_count = aqr107_get_sset_count,
++	.get_strings    = aqr107_get_strings,
++	.get_stats      = aqr107_get_stats,
++	.link_change_notify = aqr107_link_change_notify,
++},
++};
++
++module_phy_driver(aqr_driver);
++
++static struct mdio_device_id __maybe_unused aqr_tbl[] = {
++	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ1202) },
++	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ2104) },
++	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
++	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
++	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
++	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
++	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
++	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
++	{ }
++};
++
++MODULE_DEVICE_TABLE(mdio, aqr_tbl);
++
++MODULE_DESCRIPTION("Aquantia PHY driver");
++MODULE_AUTHOR("Shaohui Xie <[email protected]>");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/net/phy/aquantia_hwmon.c
++++ /dev/null
+@@ -1,250 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0
+-/* HWMON driver for Aquantia PHY
+- *
+- * Author: Nikita Yushchenko <[email protected]>
+- * Author: Andrew Lunn <[email protected]>
+- * Author: Heiner Kallweit <[email protected]>
+- */
+-
+-#include <linux/phy.h>
+-#include <linux/device.h>
+-#include <linux/ctype.h>
+-#include <linux/hwmon.h>
+-
+-#include "aquantia.h"
+-
+-/* Vendor specific 1, MDIO_MMD_VEND2 */
+-#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
+-#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
+-#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
+-#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
+-#define VEND1_THERMAL_STAT1			0xc820
+-#define VEND1_THERMAL_STAT2			0xc821
+-#define VEND1_THERMAL_STAT2_VALID		BIT(0)
+-#define VEND1_GENERAL_STAT1			0xc830
+-#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
+-#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
+-#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
+-#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
+-
+-#if IS_REACHABLE(CONFIG_HWMON)
+-
+-static umode_t aqr_hwmon_is_visible(const void *data,
+-				    enum hwmon_sensor_types type,
+-				    u32 attr, int channel)
+-{
+-	if (type != hwmon_temp)
+-		return 0;
+-
+-	switch (attr) {
+-	case hwmon_temp_input:
+-	case hwmon_temp_min_alarm:
+-	case hwmon_temp_max_alarm:
+-	case hwmon_temp_lcrit_alarm:
+-	case hwmon_temp_crit_alarm:
+-		return 0444;
+-	case hwmon_temp_min:
+-	case hwmon_temp_max:
+-	case hwmon_temp_lcrit:
+-	case hwmon_temp_crit:
+-		return 0644;
+-	default:
+-		return 0;
+-	}
+-}
+-
+-static int aqr_hwmon_get(struct phy_device *phydev, int reg, long *value)
+-{
+-	int temp = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
+-
+-	if (temp < 0)
+-		return temp;
+-
+-	/* 16 bit value is 2's complement with LSB = 1/256th degree Celsius */
+-	*value = (s16)temp * 1000 / 256;
+-
+-	return 0;
+-}
+-
+-static int aqr_hwmon_set(struct phy_device *phydev, int reg, long value)
+-{
+-	int temp;
+-
+-	if (value >= 128000 || value < -128000)
+-		return -ERANGE;
+-
+-	temp = value * 256 / 1000;
+-
+-	/* temp is in s16 range and we're interested in lower 16 bits only */
+-	return phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, (u16)temp);
+-}
+-
+-static int aqr_hwmon_test_bit(struct phy_device *phydev, int reg, int bit)
+-{
+-	int val = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
+-
+-	if (val < 0)
+-		return val;
+-
+-	return !!(val & bit);
+-}
+-
+-static int aqr_hwmon_status1(struct phy_device *phydev, int bit, long *value)
+-{
+-	int val = aqr_hwmon_test_bit(phydev, VEND1_GENERAL_STAT1, bit);
+-
+-	if (val < 0)
+-		return val;
+-
+-	*value = val;
+-
+-	return 0;
+-}
+-
+-static int aqr_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+-			  u32 attr, int channel, long *value)
+-{
+-	struct phy_device *phydev = dev_get_drvdata(dev);
+-	int reg;
+-
+-	if (type != hwmon_temp)
+-		return -EOPNOTSUPP;
+-
+-	switch (attr) {
+-	case hwmon_temp_input:
+-		reg = aqr_hwmon_test_bit(phydev, VEND1_THERMAL_STAT2,
+-					 VEND1_THERMAL_STAT2_VALID);
+-		if (reg < 0)
+-			return reg;
+-		if (!reg)
+-			return -EBUSY;
+-
+-		return aqr_hwmon_get(phydev, VEND1_THERMAL_STAT1, value);
+-
+-	case hwmon_temp_lcrit:
+-		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
+-				     value);
+-	case hwmon_temp_min:
+-		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
+-				     value);
+-	case hwmon_temp_max:
+-		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
+-				     value);
+-	case hwmon_temp_crit:
+-		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
+-				     value);
+-	case hwmon_temp_lcrit_alarm:
+-		return aqr_hwmon_status1(phydev,
+-					 VEND1_GENERAL_STAT1_LOW_TEMP_FAIL,
+-					 value);
+-	case hwmon_temp_min_alarm:
+-		return aqr_hwmon_status1(phydev,
+-					 VEND1_GENERAL_STAT1_LOW_TEMP_WARN,
+-					 value);
+-	case hwmon_temp_max_alarm:
+-		return aqr_hwmon_status1(phydev,
+-					 VEND1_GENERAL_STAT1_HIGH_TEMP_WARN,
+-					 value);
+-	case hwmon_temp_crit_alarm:
+-		return aqr_hwmon_status1(phydev,
+-					 VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL,
+-					 value);
+-	default:
+-		return -EOPNOTSUPP;
+-	}
+-}
+-
+-static int aqr_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
+-			   u32 attr, int channel, long value)
+-{
+-	struct phy_device *phydev = dev_get_drvdata(dev);
+-
+-	if (type != hwmon_temp)
+-		return -EOPNOTSUPP;
+-
+-	switch (attr) {
+-	case hwmon_temp_lcrit:
+-		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
+-				     value);
+-	case hwmon_temp_min:
+-		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
+-				     value);
+-	case hwmon_temp_max:
+-		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
+-				     value);
+-	case hwmon_temp_crit:
+-		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
+-				     value);
+-	default:
+-		return -EOPNOTSUPP;
+-	}
+-}
+-
+-static const struct hwmon_ops aqr_hwmon_ops = {
+-	.is_visible = aqr_hwmon_is_visible,
+-	.read = aqr_hwmon_read,
+-	.write = aqr_hwmon_write,
+-};
+-
+-static u32 aqr_hwmon_chip_config[] = {
+-	HWMON_C_REGISTER_TZ,
+-	0,
+-};
+-
+-static const struct hwmon_channel_info aqr_hwmon_chip = {
+-	.type = hwmon_chip,
+-	.config = aqr_hwmon_chip_config,
+-};
+-
+-static u32 aqr_hwmon_temp_config[] = {
+-	HWMON_T_INPUT |
+-	HWMON_T_MAX | HWMON_T_MIN |
+-	HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM |
+-	HWMON_T_CRIT | HWMON_T_LCRIT |
+-	HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM,
+-	0,
+-};
+-
+-static const struct hwmon_channel_info aqr_hwmon_temp = {
+-	.type = hwmon_temp,
+-	.config = aqr_hwmon_temp_config,
+-};
+-
+-static const struct hwmon_channel_info *aqr_hwmon_info[] = {
+-	&aqr_hwmon_chip,
+-	&aqr_hwmon_temp,
+-	NULL,
+-};
+-
+-static const struct hwmon_chip_info aqr_hwmon_chip_info = {
+-	.ops = &aqr_hwmon_ops,
+-	.info = aqr_hwmon_info,
+-};
+-
+-int aqr_hwmon_probe(struct phy_device *phydev)
+-{
+-	struct device *dev = &phydev->mdio.dev;
+-	struct device *hwmon_dev;
+-	char *hwmon_name;
+-	int i, j;
+-
+-	hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
+-	if (!hwmon_name)
+-		return -ENOMEM;
+-
+-	for (i = j = 0; hwmon_name[i]; i++) {
+-		if (isalnum(hwmon_name[i])) {
+-			if (i != j)
+-				hwmon_name[j] = hwmon_name[i];
+-			j++;
+-		}
+-	}
+-	hwmon_name[j] = '\0';
+-
+-	hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name,
+-					phydev, &aqr_hwmon_chip_info, NULL);
+-
+-	return PTR_ERR_OR_ZERO(hwmon_dev);
+-}
+-
+-#endif
+--- a/drivers/net/phy/aquantia_main.c
++++ /dev/null
+@@ -1,844 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0
+-/*
+- * Driver for Aquantia PHY
+- *
+- * Author: Shaohui Xie <[email protected]>
+- *
+- * Copyright 2015 Freescale Semiconductor, Inc.
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/delay.h>
+-#include <linux/bitfield.h>
+-#include <linux/phy.h>
+-
+-#include "aquantia.h"
+-
+-#define PHY_ID_AQ1202	0x03a1b445
+-#define PHY_ID_AQ2104	0x03a1b460
+-#define PHY_ID_AQR105	0x03a1b4a2
+-#define PHY_ID_AQR106	0x03a1b4d0
+-#define PHY_ID_AQR107	0x03a1b4e0
+-#define PHY_ID_AQCS109	0x03a1b5c2
+-#define PHY_ID_AQR405	0x03a1b4b0
+-#define PHY_ID_AQR113C	0x31c31c12
+-
+-#define MDIO_PHYXS_VEND_IF_STATUS		0xe812
+-#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
+-#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR	0
+-#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX	1
+-#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI	2
+-#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII	3
+-#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI	4
+-#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII	6
+-#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI	7
+-#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII	10
+-
+-#define MDIO_AN_VEND_PROV			0xc400
+-#define MDIO_AN_VEND_PROV_1000BASET_FULL	BIT(15)
+-#define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
+-#define MDIO_AN_VEND_PROV_5000BASET_FULL	BIT(11)
+-#define MDIO_AN_VEND_PROV_2500BASET_FULL	BIT(10)
+-#define MDIO_AN_VEND_PROV_DOWNSHIFT_EN		BIT(4)
+-#define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK	GENMASK(3, 0)
+-#define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT	4
+-
+-#define MDIO_AN_TX_VEND_STATUS1			0xc800
+-#define MDIO_AN_TX_VEND_STATUS1_RATE_MASK	GENMASK(3, 1)
+-#define MDIO_AN_TX_VEND_STATUS1_10BASET		0
+-#define MDIO_AN_TX_VEND_STATUS1_100BASETX	1
+-#define MDIO_AN_TX_VEND_STATUS1_1000BASET	2
+-#define MDIO_AN_TX_VEND_STATUS1_10GBASET	3
+-#define MDIO_AN_TX_VEND_STATUS1_2500BASET	4
+-#define MDIO_AN_TX_VEND_STATUS1_5000BASET	5
+-#define MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX	BIT(0)
+-
+-#define MDIO_AN_TX_VEND_INT_STATUS1		0xcc00
+-#define MDIO_AN_TX_VEND_INT_STATUS1_DOWNSHIFT	BIT(1)
+-
+-#define MDIO_AN_TX_VEND_INT_STATUS2		0xcc01
+-#define MDIO_AN_TX_VEND_INT_STATUS2_MASK	BIT(0)
+-
+-#define MDIO_AN_TX_VEND_INT_MASK2		0xd401
+-#define MDIO_AN_TX_VEND_INT_MASK2_LINK		BIT(0)
+-
+-#define MDIO_AN_RX_LP_STAT1			0xe820
+-#define MDIO_AN_RX_LP_STAT1_1000BASET_FULL	BIT(15)
+-#define MDIO_AN_RX_LP_STAT1_1000BASET_HALF	BIT(14)
+-#define MDIO_AN_RX_LP_STAT1_SHORT_REACH		BIT(13)
+-#define MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT	BIT(12)
+-#define MDIO_AN_RX_LP_STAT1_AQ_PHY		BIT(2)
+-
+-#define MDIO_AN_RX_LP_STAT4			0xe823
+-#define MDIO_AN_RX_LP_STAT4_FW_MAJOR		GENMASK(15, 8)
+-#define MDIO_AN_RX_LP_STAT4_FW_MINOR		GENMASK(7, 0)
+-
+-#define MDIO_AN_RX_VEND_STAT3			0xe832
+-#define MDIO_AN_RX_VEND_STAT3_AFR		BIT(0)
+-
+-/* MDIO_MMD_C22EXT */
+-#define MDIO_C22EXT_STAT_SGMII_RX_GOOD_FRAMES		0xd292
+-#define MDIO_C22EXT_STAT_SGMII_RX_BAD_FRAMES		0xd294
+-#define MDIO_C22EXT_STAT_SGMII_RX_FALSE_CARRIER		0xd297
+-#define MDIO_C22EXT_STAT_SGMII_TX_GOOD_FRAMES		0xd313
+-#define MDIO_C22EXT_STAT_SGMII_TX_BAD_FRAMES		0xd315
+-#define MDIO_C22EXT_STAT_SGMII_TX_FALSE_CARRIER		0xd317
+-#define MDIO_C22EXT_STAT_SGMII_TX_COLLISIONS		0xd318
+-#define MDIO_C22EXT_STAT_SGMII_TX_LINE_COLLISIONS	0xd319
+-#define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR	0xd31a
+-#define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES		0xd31b
+-
+-/* Vendor specific 1, MDIO_MMD_VEND1 */
+-#define VEND1_GLOBAL_FW_ID			0x0020
+-#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
+-#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
+-
+-#define VEND1_GLOBAL_GEN_STAT2			0xc831
+-#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
+-
+-/* The following registers all have similar layouts; first the registers... */
+-#define VEND1_GLOBAL_CFG_10M			0x0310
+-#define VEND1_GLOBAL_CFG_100M			0x031b
+-#define VEND1_GLOBAL_CFG_1G			0x031c
+-#define VEND1_GLOBAL_CFG_2_5G			0x031d
+-#define VEND1_GLOBAL_CFG_5G			0x031e
+-#define VEND1_GLOBAL_CFG_10G			0x031f
+-/* ...and now the fields */
+-#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
+-#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
+-#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
+-#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
+-
+-#define VEND1_GLOBAL_RSVD_STAT1			0xc885
+-#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
+-#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
+-
+-#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
+-#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
+-#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
+-
+-#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
+-#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
+-
+-#define VEND1_GLOBAL_INT_STD_MASK		0xff00
+-#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
+-#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
+-#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
+-#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
+-#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
+-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
+-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
+-#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
+-#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
+-#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
+-#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
+-
+-#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
+-#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
+-#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
+-#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
+-#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
+-#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
+-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
+-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
+-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
+-
+-/* Sleep and timeout for checking if the Processor-Intensive
+- * MDIO operation is finished
+- */
+-#define AQR107_OP_IN_PROG_SLEEP		1000
+-#define AQR107_OP_IN_PROG_TIMEOUT	100000
+-
+-struct aqr107_hw_stat {
+-	const char *name;
+-	int reg;
+-	int size;
+-};
+-
+-#define SGMII_STAT(n, r, s) { n, MDIO_C22EXT_STAT_SGMII_ ## r, s }
+-static const struct aqr107_hw_stat aqr107_hw_stats[] = {
+-	SGMII_STAT("sgmii_rx_good_frames",	    RX_GOOD_FRAMES,	26),
+-	SGMII_STAT("sgmii_rx_bad_frames",	    RX_BAD_FRAMES,	26),
+-	SGMII_STAT("sgmii_rx_false_carrier_events", RX_FALSE_CARRIER,	 8),
+-	SGMII_STAT("sgmii_tx_good_frames",	    TX_GOOD_FRAMES,	26),
+-	SGMII_STAT("sgmii_tx_bad_frames",	    TX_BAD_FRAMES,	26),
+-	SGMII_STAT("sgmii_tx_false_carrier_events", TX_FALSE_CARRIER,	 8),
+-	SGMII_STAT("sgmii_tx_collisions",	    TX_COLLISIONS,	 8),
+-	SGMII_STAT("sgmii_tx_line_collisions",	    TX_LINE_COLLISIONS,	 8),
+-	SGMII_STAT("sgmii_tx_frame_alignment_err",  TX_FRAME_ALIGN_ERR,	16),
+-	SGMII_STAT("sgmii_tx_runt_frames",	    TX_RUNT_FRAMES,	22),
+-};
+-#define AQR107_SGMII_STAT_SZ ARRAY_SIZE(aqr107_hw_stats)
+-
+-struct aqr107_priv {
+-	u64 sgmii_stats[AQR107_SGMII_STAT_SZ];
+-};
+-
+-static int aqr107_get_sset_count(struct phy_device *phydev)
+-{
+-	return AQR107_SGMII_STAT_SZ;
+-}
+-
+-static void aqr107_get_strings(struct phy_device *phydev, u8 *data)
+-{
+-	int i;
+-
+-	for (i = 0; i < AQR107_SGMII_STAT_SZ; i++)
+-		strscpy(data + i * ETH_GSTRING_LEN, aqr107_hw_stats[i].name,
+-			ETH_GSTRING_LEN);
+-}
+-
+-static u64 aqr107_get_stat(struct phy_device *phydev, int index)
+-{
+-	const struct aqr107_hw_stat *stat = aqr107_hw_stats + index;
+-	int len_l = min(stat->size, 16);
+-	int len_h = stat->size - len_l;
+-	u64 ret;
+-	int val;
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg);
+-	if (val < 0)
+-		return U64_MAX;
+-
+-	ret = val & GENMASK(len_l - 1, 0);
+-	if (len_h) {
+-		val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg + 1);
+-		if (val < 0)
+-			return U64_MAX;
+-
+-		ret += (val & GENMASK(len_h - 1, 0)) << 16;
+-	}
+-
+-	return ret;
+-}
+-
+-static void aqr107_get_stats(struct phy_device *phydev,
+-			     struct ethtool_stats *stats, u64 *data)
+-{
+-	struct aqr107_priv *priv = phydev->priv;
+-	u64 val;
+-	int i;
+-
+-	for (i = 0; i < AQR107_SGMII_STAT_SZ; i++) {
+-		val = aqr107_get_stat(phydev, i);
+-		if (val == U64_MAX)
+-			phydev_err(phydev, "Reading HW Statistics failed for %s\n",
+-				   aqr107_hw_stats[i].name);
+-		else
+-			priv->sgmii_stats[i] += val;
+-
+-		data[i] = priv->sgmii_stats[i];
+-	}
+-}
+-
+-static int aqr_config_aneg(struct phy_device *phydev)
+-{
+-	bool changed = false;
+-	u16 reg;
+-	int ret;
+-
+-	if (phydev->autoneg == AUTONEG_DISABLE)
+-		return genphy_c45_pma_setup_forced(phydev);
+-
+-	ret = genphy_c45_an_config_aneg(phydev);
+-	if (ret < 0)
+-		return ret;
+-	if (ret > 0)
+-		changed = true;
+-
+-	/* Clause 45 has no standardized support for 1000BaseT, therefore
+-	 * use vendor registers for this mode.
+-	 */
+-	reg = 0;
+-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+-			      phydev->advertising))
+-		reg |= MDIO_AN_VEND_PROV_1000BASET_FULL;
+-
+-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+-			      phydev->advertising))
+-		reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
+-
+-	/* Handle the case when the 2.5G and 5G speeds are not advertised */
+-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+-			      phydev->advertising))
+-		reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
+-
+-	if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+-			      phydev->advertising))
+-		reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
+-
+-	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
+-				     MDIO_AN_VEND_PROV_1000BASET_HALF |
+-				     MDIO_AN_VEND_PROV_1000BASET_FULL |
+-				     MDIO_AN_VEND_PROV_2500BASET_FULL |
+-				     MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
+-	if (ret < 0)
+-		return ret;
+-	if (ret > 0)
+-		changed = true;
+-
+-	return genphy_c45_check_and_restart_aneg(phydev, changed);
+-}
+-
+-static int aqr_config_intr(struct phy_device *phydev)
+-{
+-	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
+-	int err;
+-
+-	if (en) {
+-		/* Clear any pending interrupts before enabling them */
+-		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
+-		if (err < 0)
+-			return err;
+-	}
+-
+-	err = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_MASK2,
+-			    en ? MDIO_AN_TX_VEND_INT_MASK2_LINK : 0);
+-	if (err < 0)
+-		return err;
+-
+-	err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_STD_MASK,
+-			    en ? VEND1_GLOBAL_INT_STD_MASK_ALL : 0);
+-	if (err < 0)
+-		return err;
+-
+-	err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_VEND_MASK,
+-			    en ? VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 |
+-			    VEND1_GLOBAL_INT_VEND_MASK_AN : 0);
+-	if (err < 0)
+-		return err;
+-
+-	if (!en) {
+-		/* Clear any pending interrupts after we have disabled them */
+-		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
+-		if (err < 0)
+-			return err;
+-	}
+-
+-	return 0;
+-}
+-
+-static irqreturn_t aqr_handle_interrupt(struct phy_device *phydev)
+-{
+-	int irq_status;
+-
+-	irq_status = phy_read_mmd(phydev, MDIO_MMD_AN,
+-				  MDIO_AN_TX_VEND_INT_STATUS2);
+-	if (irq_status < 0) {
+-		phy_error(phydev);
+-		return IRQ_NONE;
+-	}
+-
+-	if (!(irq_status & MDIO_AN_TX_VEND_INT_STATUS2_MASK))
+-		return IRQ_NONE;
+-
+-	phy_trigger_machine(phydev);
+-
+-	return IRQ_HANDLED;
+-}
+-
+-static int aqr_read_status(struct phy_device *phydev)
+-{
+-	int val;
+-
+-	if (phydev->autoneg == AUTONEG_ENABLE) {
+-		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
+-		if (val < 0)
+-			return val;
+-
+-		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+-				 phydev->lp_advertising,
+-				 val & MDIO_AN_RX_LP_STAT1_1000BASET_FULL);
+-		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+-				 phydev->lp_advertising,
+-				 val & MDIO_AN_RX_LP_STAT1_1000BASET_HALF);
+-	}
+-
+-	return genphy_c45_read_status(phydev);
+-}
+-
+-static int aqr107_read_rate(struct phy_device *phydev)
+-{
+-	u32 config_reg;
+-	int val;
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_STATUS1);
+-	if (val < 0)
+-		return val;
+-
+-	if (val & MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX)
+-		phydev->duplex = DUPLEX_FULL;
+-	else
+-		phydev->duplex = DUPLEX_HALF;
+-
+-	switch (FIELD_GET(MDIO_AN_TX_VEND_STATUS1_RATE_MASK, val)) {
+-	case MDIO_AN_TX_VEND_STATUS1_10BASET:
+-		phydev->speed = SPEED_10;
+-		config_reg = VEND1_GLOBAL_CFG_10M;
+-		break;
+-	case MDIO_AN_TX_VEND_STATUS1_100BASETX:
+-		phydev->speed = SPEED_100;
+-		config_reg = VEND1_GLOBAL_CFG_100M;
+-		break;
+-	case MDIO_AN_TX_VEND_STATUS1_1000BASET:
+-		phydev->speed = SPEED_1000;
+-		config_reg = VEND1_GLOBAL_CFG_1G;
+-		break;
+-	case MDIO_AN_TX_VEND_STATUS1_2500BASET:
+-		phydev->speed = SPEED_2500;
+-		config_reg = VEND1_GLOBAL_CFG_2_5G;
+-		break;
+-	case MDIO_AN_TX_VEND_STATUS1_5000BASET:
+-		phydev->speed = SPEED_5000;
+-		config_reg = VEND1_GLOBAL_CFG_5G;
+-		break;
+-	case MDIO_AN_TX_VEND_STATUS1_10GBASET:
+-		phydev->speed = SPEED_10000;
+-		config_reg = VEND1_GLOBAL_CFG_10G;
+-		break;
+-	default:
+-		phydev->speed = SPEED_UNKNOWN;
+-		return 0;
+-	}
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, config_reg);
+-	if (val < 0)
+-		return val;
+-
+-	if (FIELD_GET(VEND1_GLOBAL_CFG_RATE_ADAPT, val) ==
+-	    VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE)
+-		phydev->rate_matching = RATE_MATCH_PAUSE;
+-	else
+-		phydev->rate_matching = RATE_MATCH_NONE;
+-
+-	return 0;
+-}
+-
+-static int aqr107_read_status(struct phy_device *phydev)
+-{
+-	int val, ret;
+-
+-	ret = aqr_read_status(phydev);
+-	if (ret)
+-		return ret;
+-
+-	if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE)
+-		return 0;
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_IF_STATUS);
+-	if (val < 0)
+-		return val;
+-
+-	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
+-	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
+-		phydev->interface = PHY_INTERFACE_MODE_10GKR;
+-		break;
+-	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
+-		phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
+-		break;
+-	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
+-		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
+-		break;
+-	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
+-		phydev->interface = PHY_INTERFACE_MODE_USXGMII;
+-		break;
+-	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
+-		phydev->interface = PHY_INTERFACE_MODE_XAUI;
+-		break;
+-	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
+-		phydev->interface = PHY_INTERFACE_MODE_SGMII;
+-		break;
+-	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
+-		phydev->interface = PHY_INTERFACE_MODE_RXAUI;
+-		break;
+-	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
+-		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+-		break;
+-	default:
+-		phydev->interface = PHY_INTERFACE_MODE_NA;
+-		break;
+-	}
+-
+-	/* Read possibly downshifted rate from vendor register */
+-	return aqr107_read_rate(phydev);
+-}
+-
+-static int aqr107_get_downshift(struct phy_device *phydev, u8 *data)
+-{
+-	int val, cnt, enable;
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV);
+-	if (val < 0)
+-		return val;
+-
+-	enable = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_EN, val);
+-	cnt = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
+-
+-	*data = enable && cnt ? cnt : DOWNSHIFT_DEV_DISABLE;
+-
+-	return 0;
+-}
+-
+-static int aqr107_set_downshift(struct phy_device *phydev, u8 cnt)
+-{
+-	int val = 0;
+-
+-	if (!FIELD_FIT(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt))
+-		return -E2BIG;
+-
+-	if (cnt != DOWNSHIFT_DEV_DISABLE) {
+-		val = MDIO_AN_VEND_PROV_DOWNSHIFT_EN;
+-		val |= FIELD_PREP(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt);
+-	}
+-
+-	return phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
+-			      MDIO_AN_VEND_PROV_DOWNSHIFT_EN |
+-			      MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
+-}
+-
+-static int aqr107_get_tunable(struct phy_device *phydev,
+-			      struct ethtool_tunable *tuna, void *data)
+-{
+-	switch (tuna->id) {
+-	case ETHTOOL_PHY_DOWNSHIFT:
+-		return aqr107_get_downshift(phydev, data);
+-	default:
+-		return -EOPNOTSUPP;
+-	}
+-}
+-
+-static int aqr107_set_tunable(struct phy_device *phydev,
+-			      struct ethtool_tunable *tuna, const void *data)
+-{
+-	switch (tuna->id) {
+-	case ETHTOOL_PHY_DOWNSHIFT:
+-		return aqr107_set_downshift(phydev, *(const u8 *)data);
+-	default:
+-		return -EOPNOTSUPP;
+-	}
+-}
+-
+-/* If we configure settings whilst firmware is still initializing the chip,
+- * then these settings may be overwritten. Therefore make sure chip
+- * initialization has completed. Use presence of the firmware ID as
+- * indicator for initialization having completed.
+- * The chip also provides a "reset completed" bit, but it's cleared after
+- * read. Therefore function would time out if called again.
+- */
+-static int aqr107_wait_reset_complete(struct phy_device *phydev)
+-{
+-	int val;
+-
+-	return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
+-					 VEND1_GLOBAL_FW_ID, val, val != 0,
+-					 20000, 2000000, false);
+-}
+-
+-static void aqr107_chip_info(struct phy_device *phydev)
+-{
+-	u8 fw_major, fw_minor, build_id, prov_id;
+-	int val;
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
+-	if (val < 0)
+-		return;
+-
+-	fw_major = FIELD_GET(VEND1_GLOBAL_FW_ID_MAJOR, val);
+-	fw_minor = FIELD_GET(VEND1_GLOBAL_FW_ID_MINOR, val);
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT1);
+-	if (val < 0)
+-		return;
+-
+-	build_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID, val);
+-	prov_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_PROV_ID, val);
+-
+-	phydev_dbg(phydev, "FW %u.%u, Build %u, Provisioning %u\n",
+-		   fw_major, fw_minor, build_id, prov_id);
+-}
+-
+-static int aqr107_config_init(struct phy_device *phydev)
+-{
+-	int ret;
+-
+-	/* Check that the PHY interface type is compatible */
+-	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+-	    phydev->interface != PHY_INTERFACE_MODE_1000BASEKX &&
+-	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
+-	    phydev->interface != PHY_INTERFACE_MODE_XGMII &&
+-	    phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
+-	    phydev->interface != PHY_INTERFACE_MODE_10GKR &&
+-	    phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
+-	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
+-	    phydev->interface != PHY_INTERFACE_MODE_RXAUI)
+-		return -ENODEV;
+-
+-	WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,
+-	     "Your devicetree is out of date, please update it. The AQR107 family doesn't support XGMII, maybe you mean USXGMII.\n");
+-
+-	ret = aqr107_wait_reset_complete(phydev);
+-	if (!ret)
+-		aqr107_chip_info(phydev);
+-
+-	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
+-}
+-
+-static int aqcs109_config_init(struct phy_device *phydev)
+-{
+-	int ret;
+-
+-	/* Check that the PHY interface type is compatible */
+-	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+-	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX)
+-		return -ENODEV;
+-
+-	ret = aqr107_wait_reset_complete(phydev);
+-	if (!ret)
+-		aqr107_chip_info(phydev);
+-
+-	/* AQCS109 belongs to a chip family partially supporting 10G and 5G.
+-	 * PMA speed ability bits are the same for all members of the family,
+-	 * AQCS109 however supports speeds up to 2.5G only.
+-	 */
+-	ret = phy_set_max_speed(phydev, SPEED_2500);
+-	if (ret)
+-		return ret;
+-
+-	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
+-}
+-
+-static void aqr107_link_change_notify(struct phy_device *phydev)
+-{
+-	u8 fw_major, fw_minor;
+-	bool downshift, short_reach, afr;
+-	int mode, val;
+-
+-	if (phydev->state != PHY_RUNNING || phydev->autoneg == AUTONEG_DISABLE)
+-		return;
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
+-	/* call failed or link partner is no Aquantia PHY */
+-	if (val < 0 || !(val & MDIO_AN_RX_LP_STAT1_AQ_PHY))
+-		return;
+-
+-	short_reach = val & MDIO_AN_RX_LP_STAT1_SHORT_REACH;
+-	downshift = val & MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT;
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT4);
+-	if (val < 0)
+-		return;
+-
+-	fw_major = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MAJOR, val);
+-	fw_minor = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MINOR, val);
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_VEND_STAT3);
+-	if (val < 0)
+-		return;
+-
+-	afr = val & MDIO_AN_RX_VEND_STAT3_AFR;
+-
+-	phydev_dbg(phydev, "Link partner is Aquantia PHY, FW %u.%u%s%s%s\n",
+-		   fw_major, fw_minor,
+-		   short_reach ? ", short reach mode" : "",
+-		   downshift ? ", fast-retrain downshift advertised" : "",
+-		   afr ? ", fast reframe advertised" : "");
+-
+-	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT9);
+-	if (val < 0)
+-		return;
+-
+-	mode = FIELD_GET(VEND1_GLOBAL_RSVD_STAT9_MODE, val);
+-	if (mode == VEND1_GLOBAL_RSVD_STAT9_1000BT2)
+-		phydev_info(phydev, "Aquantia 1000Base-T2 mode active\n");
+-}
+-
+-static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
+-{
+-	int val, err;
+-
+-	/* The datasheet notes to wait at least 1ms after issuing a
+-	 * processor intensive operation before checking.
+-	 * We cannot use the 'sleep_before_read' parameter of read_poll_timeout
+-	 * because that just determines the maximum time slept, not the minimum.
+-	 */
+-	usleep_range(1000, 5000);
+-
+-	err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
+-					VEND1_GLOBAL_GEN_STAT2, val,
+-					!(val & VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG),
+-					AQR107_OP_IN_PROG_SLEEP,
+-					AQR107_OP_IN_PROG_TIMEOUT, false);
+-	if (err) {
+-		phydev_err(phydev, "timeout: processor-intensive MDIO operation\n");
+-		return err;
+-	}
+-
+-	return 0;
+-}
+-
+-static int aqr107_get_rate_matching(struct phy_device *phydev,
+-				    phy_interface_t iface)
+-{
+-	if (iface == PHY_INTERFACE_MODE_10GBASER ||
+-	    iface == PHY_INTERFACE_MODE_2500BASEX ||
+-	    iface == PHY_INTERFACE_MODE_NA)
+-		return RATE_MATCH_PAUSE;
+-	return RATE_MATCH_NONE;
+-}
+-
+-static int aqr107_suspend(struct phy_device *phydev)
+-{
+-	int err;
+-
+-	err = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1,
+-			       MDIO_CTRL1_LPOWER);
+-	if (err)
+-		return err;
+-
+-	return aqr107_wait_processor_intensive_op(phydev);
+-}
+-
+-static int aqr107_resume(struct phy_device *phydev)
+-{
+-	int err;
+-
+-	err = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1,
+-				 MDIO_CTRL1_LPOWER);
+-	if (err)
+-		return err;
+-
+-	return aqr107_wait_processor_intensive_op(phydev);
+-}
+-
+-static int aqr107_probe(struct phy_device *phydev)
+-{
+-	phydev->priv = devm_kzalloc(&phydev->mdio.dev,
+-				    sizeof(struct aqr107_priv), GFP_KERNEL);
+-	if (!phydev->priv)
+-		return -ENOMEM;
+-
+-	return aqr_hwmon_probe(phydev);
+-}
+-
+-static struct phy_driver aqr_driver[] = {
+-{
+-	PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
+-	.name		= "Aquantia AQ1202",
+-	.config_aneg    = aqr_config_aneg,
+-	.config_intr	= aqr_config_intr,
+-	.handle_interrupt = aqr_handle_interrupt,
+-	.read_status	= aqr_read_status,
+-},
+-{
+-	PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
+-	.name		= "Aquantia AQ2104",
+-	.config_aneg    = aqr_config_aneg,
+-	.config_intr	= aqr_config_intr,
+-	.handle_interrupt = aqr_handle_interrupt,
+-	.read_status	= aqr_read_status,
+-},
+-{
+-	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
+-	.name		= "Aquantia AQR105",
+-	.config_aneg    = aqr_config_aneg,
+-	.config_intr	= aqr_config_intr,
+-	.handle_interrupt = aqr_handle_interrupt,
+-	.read_status	= aqr_read_status,
+-	.suspend	= aqr107_suspend,
+-	.resume		= aqr107_resume,
+-},
+-{
+-	PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
+-	.name		= "Aquantia AQR106",
+-	.config_aneg    = aqr_config_aneg,
+-	.config_intr	= aqr_config_intr,
+-	.handle_interrupt = aqr_handle_interrupt,
+-	.read_status	= aqr_read_status,
+-},
+-{
+-	PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
+-	.name		= "Aquantia AQR107",
+-	.probe		= aqr107_probe,
+-	.get_rate_matching = aqr107_get_rate_matching,
+-	.config_init	= aqr107_config_init,
+-	.config_aneg    = aqr_config_aneg,
+-	.config_intr	= aqr_config_intr,
+-	.handle_interrupt = aqr_handle_interrupt,
+-	.read_status	= aqr107_read_status,
+-	.get_tunable    = aqr107_get_tunable,
+-	.set_tunable    = aqr107_set_tunable,
+-	.suspend	= aqr107_suspend,
+-	.resume		= aqr107_resume,
+-	.get_sset_count	= aqr107_get_sset_count,
+-	.get_strings	= aqr107_get_strings,
+-	.get_stats	= aqr107_get_stats,
+-	.link_change_notify = aqr107_link_change_notify,
+-},
+-{
+-	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
+-	.name		= "Aquantia AQCS109",
+-	.probe		= aqr107_probe,
+-	.get_rate_matching = aqr107_get_rate_matching,
+-	.config_init	= aqcs109_config_init,
+-	.config_aneg    = aqr_config_aneg,
+-	.config_intr	= aqr_config_intr,
+-	.handle_interrupt = aqr_handle_interrupt,
+-	.read_status	= aqr107_read_status,
+-	.get_tunable    = aqr107_get_tunable,
+-	.set_tunable    = aqr107_set_tunable,
+-	.suspend	= aqr107_suspend,
+-	.resume		= aqr107_resume,
+-	.get_sset_count	= aqr107_get_sset_count,
+-	.get_strings	= aqr107_get_strings,
+-	.get_stats	= aqr107_get_stats,
+-	.link_change_notify = aqr107_link_change_notify,
+-},
+-{
+-	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
+-	.name		= "Aquantia AQR405",
+-	.config_aneg    = aqr_config_aneg,
+-	.config_intr	= aqr_config_intr,
+-	.handle_interrupt = aqr_handle_interrupt,
+-	.read_status	= aqr_read_status,
+-},
+-{
+-	PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
+-	.name           = "Aquantia AQR113C",
+-	.probe          = aqr107_probe,
+-	.get_rate_matching = aqr107_get_rate_matching,
+-	.config_init    = aqr107_config_init,
+-	.config_aneg    = aqr_config_aneg,
+-	.config_intr    = aqr_config_intr,
+-	.handle_interrupt       = aqr_handle_interrupt,
+-	.read_status    = aqr107_read_status,
+-	.get_tunable    = aqr107_get_tunable,
+-	.set_tunable    = aqr107_set_tunable,
+-	.suspend        = aqr107_suspend,
+-	.resume         = aqr107_resume,
+-	.get_sset_count = aqr107_get_sset_count,
+-	.get_strings    = aqr107_get_strings,
+-	.get_stats      = aqr107_get_stats,
+-	.link_change_notify = aqr107_link_change_notify,
+-},
+-};
+-
+-module_phy_driver(aqr_driver);
+-
+-static struct mdio_device_id __maybe_unused aqr_tbl[] = {
+-	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ1202) },
+-	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ2104) },
+-	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
+-	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
+-	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
+-	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
+-	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
+-	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
+-	{ }
+-};
+-
+-MODULE_DEVICE_TABLE(mdio, aqr_tbl);
+-
+-MODULE_DESCRIPTION("Aquantia PHY driver");
+-MODULE_AUTHOR("Shaohui Xie <[email protected]>");
+-MODULE_LICENSE("GPL v2");

target/linux/generic/backport-5.15/737-02-v6.7-net-phy-aquantia-move-MMD_VEND-define-to-header.patch

@@ -0,0 +1,183 @@
+From e1fbfa4a995d42e02e22b0dff2f8b4fdee1504b3 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <[email protected]>
+Date: Tue, 14 Nov 2023 15:08:42 +0100
+Subject: [PATCH 2/3] net: phy: aquantia: move MMD_VEND define to header
+
+Move MMD_VEND define to header to clean things up and in preparation for
+firmware loading support that require some define placed in
+aquantia_main.
+
+Signed-off-by: Christian Marangi <[email protected]>
+Reviewed-by: Andrew Lunn <[email protected]>
+Signed-off-by: David S. Miller <[email protected]>
+---
+ drivers/net/phy/aquantia/aquantia.h       | 69 +++++++++++++++++++++++
+ drivers/net/phy/aquantia/aquantia_hwmon.c | 14 -----
+ drivers/net/phy/aquantia/aquantia_main.c  | 55 ------------------
+ 3 files changed, 69 insertions(+), 69 deletions(-)
+
+--- a/drivers/net/phy/aquantia/aquantia.h
++++ b/drivers/net/phy/aquantia/aquantia.h
+@@ -9,6 +9,75 @@
+ #include <linux/device.h>
+ #include <linux/phy.h>
+ 
++/* Vendor specific 1, MDIO_MMD_VEND1 */
++#define VEND1_GLOBAL_FW_ID			0x0020
++#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
++#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
++
++/* The following registers all have similar layouts; first the registers... */
++#define VEND1_GLOBAL_CFG_10M			0x0310
++#define VEND1_GLOBAL_CFG_100M			0x031b
++#define VEND1_GLOBAL_CFG_1G			0x031c
++#define VEND1_GLOBAL_CFG_2_5G			0x031d
++#define VEND1_GLOBAL_CFG_5G			0x031e
++#define VEND1_GLOBAL_CFG_10G			0x031f
++/* ...and now the fields */
++#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
++#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
++#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
++#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
++
++/* Vendor specific 1, MDIO_MMD_VEND2 */
++#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
++#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
++#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
++#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
++#define VEND1_THERMAL_STAT1			0xc820
++#define VEND1_THERMAL_STAT2			0xc821
++#define VEND1_THERMAL_STAT2_VALID		BIT(0)
++#define VEND1_GENERAL_STAT1			0xc830
++#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
++#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
++#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
++#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
++
++#define VEND1_GLOBAL_GEN_STAT2			0xc831
++#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
++
++#define VEND1_GLOBAL_RSVD_STAT1			0xc885
++#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
++#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
++
++#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
++#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
++#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
++
++#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
++#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
++
++#define VEND1_GLOBAL_INT_STD_MASK		0xff00
++#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
++#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
++#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
++#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
++#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
++#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
++#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
++#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
++#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
++#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
++#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
++
++#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
++#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
++#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
++#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
++#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
++#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
++#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
++#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
++#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
++
+ #if IS_REACHABLE(CONFIG_HWMON)
+ int aqr_hwmon_probe(struct phy_device *phydev);
+ #else
+--- a/drivers/net/phy/aquantia/aquantia_hwmon.c
++++ b/drivers/net/phy/aquantia/aquantia_hwmon.c
+@@ -13,20 +13,6 @@
+ 
+ #include "aquantia.h"
+ 
+-/* Vendor specific 1, MDIO_MMD_VEND2 */
+-#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
+-#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
+-#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
+-#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
+-#define VEND1_THERMAL_STAT1			0xc820
+-#define VEND1_THERMAL_STAT2			0xc821
+-#define VEND1_THERMAL_STAT2_VALID		BIT(0)
+-#define VEND1_GENERAL_STAT1			0xc830
+-#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
+-#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
+-#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
+-#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
+-
+ #if IS_REACHABLE(CONFIG_HWMON)
+ 
+ static umode_t aqr_hwmon_is_visible(const void *data,
+--- a/drivers/net/phy/aquantia/aquantia_main.c
++++ b/drivers/net/phy/aquantia/aquantia_main.c
+@@ -89,61 +89,6 @@
+ #define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR	0xd31a
+ #define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES		0xd31b
+ 
+-/* Vendor specific 1, MDIO_MMD_VEND1 */
+-#define VEND1_GLOBAL_FW_ID			0x0020
+-#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
+-#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
+-
+-#define VEND1_GLOBAL_GEN_STAT2			0xc831
+-#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
+-
+-/* The following registers all have similar layouts; first the registers... */
+-#define VEND1_GLOBAL_CFG_10M			0x0310
+-#define VEND1_GLOBAL_CFG_100M			0x031b
+-#define VEND1_GLOBAL_CFG_1G			0x031c
+-#define VEND1_GLOBAL_CFG_2_5G			0x031d
+-#define VEND1_GLOBAL_CFG_5G			0x031e
+-#define VEND1_GLOBAL_CFG_10G			0x031f
+-/* ...and now the fields */
+-#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
+-#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
+-#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
+-#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
+-
+-#define VEND1_GLOBAL_RSVD_STAT1			0xc885
+-#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
+-#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
+-
+-#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
+-#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
+-#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
+-
+-#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
+-#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
+-
+-#define VEND1_GLOBAL_INT_STD_MASK		0xff00
+-#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
+-#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
+-#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
+-#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
+-#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
+-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
+-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
+-#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
+-#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
+-#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
+-#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
+-
+-#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
+-#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
+-#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
+-#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
+-#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
+-#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
+-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
+-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
+-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
+-
+ /* Sleep and timeout for checking if the Processor-Intensive
+  * MDIO operation is finished
+  */

target/linux/generic/backport-5.15/737-03-v6.7-net-phy-aquantia-add-firmware-load-support.patch

@@ -0,0 +1,504 @@
+From e93984ebc1c82bd34f7a1b3391efaceee0a8ae96 Mon Sep 17 00:00:00 2001
+From: Robert Marko <[email protected]>
+Date: Tue, 14 Nov 2023 15:08:43 +0100
+Subject: [PATCH 3/3] net: phy: aquantia: add firmware load support
+
+Aquantia PHY-s require firmware to be loaded before they start operating.
+It can be automatically loaded in case when there is a SPI-NOR connected
+to Aquantia PHY-s or can be loaded from the host via MDIO.
+
+This patch adds support for loading the firmware via MDIO as in most cases
+there is no SPI-NOR being used to save on cost.
+Firmware loading code itself is ported from mainline U-boot with cleanups.
+
+The firmware has mixed values both in big and little endian.
+PHY core itself is big-endian but it expects values to be in little-endian.
+The firmware is little-endian but CRC-16 value for it is stored at the end
+of firmware in big-endian.
+
+It seems the PHY does the conversion internally from firmware that is
+little-endian to the PHY that is big-endian on using the mailbox
+but mailbox returns a big-endian CRC-16 to verify the written data
+integrity.
+
+Co-developed-by: Christian Marangi <[email protected]>
+Signed-off-by: Robert Marko <[email protected]>
+Signed-off-by: Christian Marangi <[email protected]>
+Reviewed-by: Andrew Lunn <[email protected]>
+Signed-off-by: David S. Miller <[email protected]>
+---
+ drivers/net/phy/aquantia/Kconfig             |   1 +
+ drivers/net/phy/aquantia/Makefile            |   2 +-
+ drivers/net/phy/aquantia/aquantia.h          |  32 ++
+ drivers/net/phy/aquantia/aquantia_firmware.c | 370 +++++++++++++++++++
+ drivers/net/phy/aquantia/aquantia_main.c     |   6 +
+ 5 files changed, 410 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/net/phy/aquantia/aquantia_firmware.c
+
+--- a/drivers/net/phy/aquantia/Kconfig
++++ b/drivers/net/phy/aquantia/Kconfig
+@@ -1,5 +1,6 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+ config AQUANTIA_PHY
+ 	tristate "Aquantia PHYs"
++	select CRC_CCITT
+ 	help
+ 	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
+--- a/drivers/net/phy/aquantia/Makefile
++++ b/drivers/net/phy/aquantia/Makefile
+@@ -1,5 +1,5 @@
+ # SPDX-License-Identifier: GPL-2.0
+-aquantia-objs			+= aquantia_main.o
++aquantia-objs			+= aquantia_main.o aquantia_firmware.o
+ ifdef CONFIG_HWMON
+ aquantia-objs			+= aquantia_hwmon.o
+ endif
+--- a/drivers/net/phy/aquantia/aquantia.h
++++ b/drivers/net/phy/aquantia/aquantia.h
+@@ -10,10 +10,35 @@
+ #include <linux/phy.h>
+ 
+ /* Vendor specific 1, MDIO_MMD_VEND1 */
++#define VEND1_GLOBAL_SC				0x0
++#define VEND1_GLOBAL_SC_SOFT_RESET		BIT(15)
++#define VEND1_GLOBAL_SC_LOW_POWER		BIT(11)
++
+ #define VEND1_GLOBAL_FW_ID			0x0020
+ #define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
+ #define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
+ 
++#define VEND1_GLOBAL_MAILBOX_INTERFACE1			0x0200
++#define VEND1_GLOBAL_MAILBOX_INTERFACE1_EXECUTE		BIT(15)
++#define VEND1_GLOBAL_MAILBOX_INTERFACE1_WRITE		BIT(14)
++#define VEND1_GLOBAL_MAILBOX_INTERFACE1_CRC_RESET	BIT(12)
++#define VEND1_GLOBAL_MAILBOX_INTERFACE1_BUSY		BIT(8)
++
++#define VEND1_GLOBAL_MAILBOX_INTERFACE2			0x0201
++#define VEND1_GLOBAL_MAILBOX_INTERFACE3			0x0202
++#define VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR_MASK	GENMASK(15, 0)
++#define VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR_MASK, (u16)((x) >> 16))
++#define VEND1_GLOBAL_MAILBOX_INTERFACE4			0x0203
++#define VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR_MASK	GENMASK(15, 2)
++#define VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR_MASK, (u16)(x))
++
++#define VEND1_GLOBAL_MAILBOX_INTERFACE5			0x0204
++#define VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA_MASK	GENMASK(15, 0)
++#define VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA_MASK, (u16)((x) >> 16))
++#define VEND1_GLOBAL_MAILBOX_INTERFACE6			0x0205
++#define VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA_MASK	GENMASK(15, 0)
++#define VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA_MASK, (u16)(x))
++
+ /* The following registers all have similar layouts; first the registers... */
+ #define VEND1_GLOBAL_CFG_10M			0x0310
+ #define VEND1_GLOBAL_CFG_100M			0x031b
+@@ -28,6 +53,11 @@
+ #define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
+ 
+ /* Vendor specific 1, MDIO_MMD_VEND2 */
++#define VEND1_GLOBAL_CONTROL2			0xc001
++#define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_RST	BIT(15)
++#define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD	BIT(6)
++#define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL	BIT(0)
++
+ #define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
+ #define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
+ #define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
+@@ -83,3 +113,5 @@ int aqr_hwmon_probe(struct phy_device *p
+ #else
+ static inline int aqr_hwmon_probe(struct phy_device *phydev) { return 0; }
+ #endif
++
++int aqr_firmware_load(struct phy_device *phydev);
+--- /dev/null
++++ b/drivers/net/phy/aquantia/aquantia_firmware.c
+@@ -0,0 +1,370 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include <linux/bitfield.h>
++#include <linux/of.h>
++#include <linux/firmware.h>
++#include <linux/crc-ccitt.h>
++#include <linux/nvmem-consumer.h>
++
++#include <asm/unaligned.h>
++
++#include "aquantia.h"
++
++#define UP_RESET_SLEEP		100
++
++/* addresses of memory segments in the phy */
++#define DRAM_BASE_ADDR		0x3FFE0000
++#define IRAM_BASE_ADDR		0x40000000
++
++/* firmware image format constants */
++#define VERSION_STRING_SIZE		0x40
++#define VERSION_STRING_OFFSET		0x0200
++/* primary offset is written at an offset from the start of the fw blob */
++#define PRIMARY_OFFSET_OFFSET		0x8
++/* primary offset needs to be then added to a base offset */
++#define PRIMARY_OFFSET_SHIFT		12
++#define PRIMARY_OFFSET(x)		((x) << PRIMARY_OFFSET_SHIFT)
++#define HEADER_OFFSET			0x300
++
++struct aqr_fw_header {
++	u32 padding;
++	u8 iram_offset[3];
++	u8 iram_size[3];
++	u8 dram_offset[3];
++	u8 dram_size[3];
++} __packed;
++
++enum aqr_fw_src {
++	AQR_FW_SRC_NVMEM = 0,
++	AQR_FW_SRC_FS,
++};
++
++static const char * const aqr_fw_src_string[] = {
++	[AQR_FW_SRC_NVMEM] = "NVMEM",
++	[AQR_FW_SRC_FS] = "FS",
++};
++
++/* AQR firmware doesn't have fixed offsets for iram and dram section
++ * but instead provide an header with the offset to use on reading
++ * and parsing the firmware.
++ *
++ * AQR firmware can't be trusted and each offset is validated to be
++ * not negative and be in the size of the firmware itself.
++ */
++static bool aqr_fw_validate_get(size_t size, size_t offset, size_t get_size)
++{
++	return offset + get_size <= size;
++}
++
++static int aqr_fw_get_be16(const u8 *data, size_t offset, size_t size, u16 *value)
++{
++	if (!aqr_fw_validate_get(size, offset, sizeof(u16)))
++		return -EINVAL;
++
++	*value = get_unaligned_be16(data + offset);
++
++	return 0;
++}
++
++static int aqr_fw_get_le16(const u8 *data, size_t offset, size_t size, u16 *value)
++{
++	if (!aqr_fw_validate_get(size, offset, sizeof(u16)))
++		return -EINVAL;
++
++	*value = get_unaligned_le16(data + offset);
++
++	return 0;
++}
++
++static int aqr_fw_get_le24(const u8 *data, size_t offset, size_t size, u32 *value)
++{
++	if (!aqr_fw_validate_get(size, offset, sizeof(u8) * 3))
++		return -EINVAL;
++
++	*value = get_unaligned_le24(data + offset);
++
++	return 0;
++}
++
++/* load data into the phy's memory */
++static int aqr_fw_load_memory(struct phy_device *phydev, u32 addr,
++			      const u8 *data, size_t len)
++{
++	u16 crc = 0, up_crc;
++	size_t pos;
++
++	/* PHY expect addr in LE */
++	addr = (__force u32)cpu_to_le32(addr);
++
++	phy_write_mmd(phydev, MDIO_MMD_VEND1,
++		      VEND1_GLOBAL_MAILBOX_INTERFACE1,
++		      VEND1_GLOBAL_MAILBOX_INTERFACE1_CRC_RESET);
++	phy_write_mmd(phydev, MDIO_MMD_VEND1,
++		      VEND1_GLOBAL_MAILBOX_INTERFACE3,
++		      VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR(addr));
++	phy_write_mmd(phydev, MDIO_MMD_VEND1,
++		      VEND1_GLOBAL_MAILBOX_INTERFACE4,
++		      VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR(addr));
++
++	/* We assume and enforce the size to be word aligned.
++	 * If a firmware that is not word aligned is found, please report upstream.
++	 */
++	for (pos = 0; pos < len; pos += sizeof(u32)) {
++		u32 word;
++
++		/* FW data is always stored in little-endian */
++		word = get_unaligned((const u32 *)(data + pos));
++
++		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE5,
++			      VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA(word));
++		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE6,
++			      VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA(word));
++
++		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE1,
++			      VEND1_GLOBAL_MAILBOX_INTERFACE1_EXECUTE |
++			      VEND1_GLOBAL_MAILBOX_INTERFACE1_WRITE);
++
++		/* calculate CRC as we load data to the mailbox.
++		 * We convert word to big-endian as PHY is BE and mailbox will
++		 * return a BE CRC.
++		 */
++		word = (__force u32)cpu_to_be32(word);
++		crc = crc_ccitt_false(crc, (u8 *)&word, sizeof(word));
++	}
++
++	up_crc = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE2);
++	if (crc != up_crc) {
++		phydev_err(phydev, "CRC mismatch: calculated 0x%04x PHY 0x%04x\n",
++			   crc, up_crc);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int aqr_fw_boot(struct phy_device *phydev, const u8 *data, size_t size,
++		       enum aqr_fw_src fw_src)
++{
++	u16 calculated_crc, read_crc, read_primary_offset;
++	u32 iram_offset = 0, iram_size = 0;
++	u32 dram_offset = 0, dram_size = 0;
++	char version[VERSION_STRING_SIZE];
++	u32 primary_offset = 0;
++	int ret;
++
++	/* extract saved CRC at the end of the fw
++	 * CRC is saved in big-endian as PHY is BE
++	 */
++	ret = aqr_fw_get_be16(data, size - sizeof(u16), size, &read_crc);
++	if (ret) {
++		phydev_err(phydev, "bad firmware CRC in firmware\n");
++		return ret;
++	}
++	calculated_crc = crc_ccitt_false(0, data, size - sizeof(u16));
++	if (read_crc != calculated_crc) {
++		phydev_err(phydev, "bad firmware CRC: file 0x%04x calculated 0x%04x\n",
++			   read_crc, calculated_crc);
++		return -EINVAL;
++	}
++
++	/* Get the primary offset to extract DRAM and IRAM sections. */
++	ret = aqr_fw_get_le16(data, PRIMARY_OFFSET_OFFSET, size, &read_primary_offset);
++	if (ret) {
++		phydev_err(phydev, "bad primary offset in firmware\n");
++		return ret;
++	}
++	primary_offset = PRIMARY_OFFSET(read_primary_offset);
++
++	/* Find the DRAM and IRAM sections within the firmware file.
++	 * Make sure the fw_header is correctly in the firmware.
++	 */
++	if (!aqr_fw_validate_get(size, primary_offset + HEADER_OFFSET,
++				 sizeof(struct aqr_fw_header))) {
++		phydev_err(phydev, "bad fw_header in firmware\n");
++		return -EINVAL;
++	}
++
++	/* offset are in LE and values needs to be converted to cpu endian */
++	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
++			      offsetof(struct aqr_fw_header, iram_offset),
++			      size, &iram_offset);
++	if (ret) {
++		phydev_err(phydev, "bad iram offset in firmware\n");
++		return ret;
++	}
++	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
++			      offsetof(struct aqr_fw_header, iram_size),
++			      size, &iram_size);
++	if (ret) {
++		phydev_err(phydev, "invalid iram size in firmware\n");
++		return ret;
++	}
++	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
++			      offsetof(struct aqr_fw_header, dram_offset),
++			      size, &dram_offset);
++	if (ret) {
++		phydev_err(phydev, "bad dram offset in firmware\n");
++		return ret;
++	}
++	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
++			      offsetof(struct aqr_fw_header, dram_size),
++			      size, &dram_size);
++	if (ret) {
++		phydev_err(phydev, "invalid dram size in firmware\n");
++		return ret;
++	}
++
++	/* Increment the offset with the primary offset.
++	 * Validate iram/dram offset and size.
++	 */
++	iram_offset += primary_offset;
++	if (iram_size % sizeof(u32)) {
++		phydev_err(phydev, "iram size if not aligned to word size. Please report this upstream!\n");
++		return -EINVAL;
++	}
++	if (!aqr_fw_validate_get(size, iram_offset, iram_size)) {
++		phydev_err(phydev, "invalid iram offset for iram size\n");
++		return -EINVAL;
++	}
++
++	dram_offset += primary_offset;
++	if (dram_size % sizeof(u32)) {
++		phydev_err(phydev, "dram size if not aligned to word size. Please report this upstream!\n");
++		return -EINVAL;
++	}
++	if (!aqr_fw_validate_get(size, dram_offset, dram_size)) {
++		phydev_err(phydev, "invalid iram offset for iram size\n");
++		return -EINVAL;
++	}
++
++	phydev_dbg(phydev, "primary %d IRAM offset=%d size=%d DRAM offset=%d size=%d\n",
++		   primary_offset, iram_offset, iram_size, dram_offset, dram_size);
++
++	if (!aqr_fw_validate_get(size, dram_offset + VERSION_STRING_OFFSET,
++				 VERSION_STRING_SIZE)) {
++		phydev_err(phydev, "invalid version in firmware\n");
++		return -EINVAL;
++	}
++	strscpy(version, (char *)data + dram_offset + VERSION_STRING_OFFSET,
++		VERSION_STRING_SIZE);
++	if (version[0] == '\0') {
++		phydev_err(phydev, "invalid version in firmware\n");
++		return -EINVAL;
++	}
++	phydev_info(phydev, "loading firmware version '%s' from '%s'\n", version,
++		    aqr_fw_src_string[fw_src]);
++
++	/* stall the microcprocessor */
++	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
++		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL | VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD);
++
++	phydev_dbg(phydev, "loading DRAM 0x%08x from offset=%d size=%d\n",
++		   DRAM_BASE_ADDR, dram_offset, dram_size);
++	ret = aqr_fw_load_memory(phydev, DRAM_BASE_ADDR, data + dram_offset,
++				 dram_size);
++	if (ret)
++		return ret;
++
++	phydev_dbg(phydev, "loading IRAM 0x%08x from offset=%d size=%d\n",
++		   IRAM_BASE_ADDR, iram_offset, iram_size);
++	ret = aqr_fw_load_memory(phydev, IRAM_BASE_ADDR, data + iram_offset,
++				 iram_size);
++	if (ret)
++		return ret;
++
++	/* make sure soft reset and low power mode are clear */
++	phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_SC,
++			   VEND1_GLOBAL_SC_SOFT_RESET | VEND1_GLOBAL_SC_LOW_POWER);
++
++	/* Release the microprocessor. UP_RESET must be held for 100 usec. */
++	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
++		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL |
++		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD |
++		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_RST);
++	usleep_range(UP_RESET_SLEEP, UP_RESET_SLEEP * 2);
++
++	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
++		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD);
++
++	return 0;
++}
++
++static int aqr_firmware_load_nvmem(struct phy_device *phydev)
++{
++	struct nvmem_cell *cell;
++	size_t size;
++	u8 *buf;
++	int ret;
++
++	cell = nvmem_cell_get(&phydev->mdio.dev, "firmware");
++	if (IS_ERR(cell))
++		return PTR_ERR(cell);
++
++	buf = nvmem_cell_read(cell, &size);
++	if (IS_ERR(buf)) {
++		ret = PTR_ERR(buf);
++		goto exit;
++	}
++
++	ret = aqr_fw_boot(phydev, buf, size, AQR_FW_SRC_NVMEM);
++	if (ret)
++		phydev_err(phydev, "firmware loading failed: %d\n", ret);
++
++	kfree(buf);
++exit:
++	nvmem_cell_put(cell);
++
++	return ret;
++}
++
++static int aqr_firmware_load_fs(struct phy_device *phydev)
++{
++	struct device *dev = &phydev->mdio.dev;
++	const struct firmware *fw;
++	const char *fw_name;
++	int ret;
++
++	ret = of_property_read_string(dev->of_node, "firmware-name",
++				      &fw_name);
++	if (ret)
++		return ret;
++
++	ret = request_firmware(&fw, fw_name, dev);
++	if (ret) {
++		phydev_err(phydev, "failed to find FW file %s (%d)\n",
++			   fw_name, ret);
++		return ret;
++	}
++
++	ret = aqr_fw_boot(phydev, fw->data, fw->size, AQR_FW_SRC_FS);
++	if (ret)
++		phydev_err(phydev, "firmware loading failed: %d\n", ret);
++
++	release_firmware(fw);
++
++	return ret;
++}
++
++int aqr_firmware_load(struct phy_device *phydev)
++{
++	int ret;
++
++	/* Check if the firmware is not already loaded by pooling
++	 * the current version returned by the PHY. If 0 is returned,
++	 * no firmware is loaded.
++	 */
++	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
++	if (ret > 0)
++		goto exit;
++
++	ret = aqr_firmware_load_nvmem(phydev);
++	if (!ret)
++		goto exit;
++
++	ret = aqr_firmware_load_fs(phydev);
++	if (ret)
++		return ret;
++
++exit:
++	return 0;
++}
+--- a/drivers/net/phy/aquantia/aquantia_main.c
++++ b/drivers/net/phy/aquantia/aquantia_main.c
+@@ -658,11 +658,17 @@ static int aqr107_resume(struct phy_devi
+ 
+ static int aqr107_probe(struct phy_device *phydev)
+ {
++	int ret;
++
+ 	phydev->priv = devm_kzalloc(&phydev->mdio.dev,
+ 				    sizeof(struct aqr107_priv), GFP_KERNEL);
+ 	if (!phydev->priv)
+ 		return -ENOMEM;
+ 
++	ret = aqr_firmware_load(phydev);
++	if (ret)
++		return ret;
++
+ 	return aqr_hwmon_probe(phydev);
+ }
+ 

target/linux/generic/backport-5.15/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch

@@ -31,7 +31,7 @@ Signed-off-by: David S. Miller <[email protected]>
  F:	drivers/net/phy/motorcomm.c
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -245,7 +245,7 @@ config MOTORCOMM_PHY
+@@ -242,7 +242,7 @@ config MOTORCOMM_PHY
  	tristate "Motorcomm PHYs"
  	help
  	  Enables support for Motorcomm network PHYs.

target/linux/generic/backport-5.15/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch

@@ -22,7 +22,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -245,7 +245,7 @@ config MOTORCOMM_PHY
+@@ -242,7 +242,7 @@ config MOTORCOMM_PHY
  	tristate "Motorcomm PHYs"
  	help
  	  Enables support for Motorcomm network PHYs.

target/linux/generic/backport-5.15/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch

@@ -19,7 +19,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -245,7 +245,7 @@ config MOTORCOMM_PHY
+@@ -242,7 +242,7 @@ config MOTORCOMM_PHY
  	tristate "Motorcomm PHYs"
  	help
  	  Enables support for Motorcomm network PHYs.

target/linux/generic/hack-5.15/720-net-phy-add-aqr-phys.patch

@@ -7,8 +7,8 @@ PHYs AQR113C and AQR813.
 
 Signed-off-by: Birger Koblitz <[email protected]>
 
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
+--- a/drivers/net/phy/aquantia/aquantia_main.c
++++ b/drivers/net/phy/aquantia/aquantia_main.c
 @@ -23,6 +23,7 @@
  #define PHY_ID_AQCS109	0x03a1b5c2
  #define PHY_ID_AQR405	0x03a1b4b0
@@ -17,7 +17,7 @@ Signed-off-by: Birger Koblitz <[email protected]>
  
  #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
  #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-@@ -415,6 +416,49 @@ static int aqr107_read_rate(struct phy_d
+@@ -360,6 +361,49 @@ static int aqr107_read_rate(struct phy_d
  	return 0;
  }
  
@@ -67,7 +67,7 @@ Signed-off-by: Birger Koblitz <[email protected]>
  static int aqr107_read_status(struct phy_device *phydev)
  {
  	int val, ret;
-@@ -554,7 +598,7 @@ static void aqr107_chip_info(struct phy_
+@@ -499,7 +543,7 @@ static void aqr107_chip_info(struct phy_
  	build_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID, val);
  	prov_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_PROV_ID, val);
  
@@ -76,7 +76,7 @@ Signed-off-by: Birger Koblitz <[email protected]>
  		   fw_major, fw_minor, build_id, prov_id);
  }
  
-@@ -811,7 +855,7 @@ static struct phy_driver aqr_driver[] =
+@@ -762,7 +806,7 @@ static struct phy_driver aqr_driver[] =
  	.config_aneg    = aqr_config_aneg,
  	.config_intr    = aqr_config_intr,
  	.handle_interrupt       = aqr_handle_interrupt,
@@ -85,7 +85,7 @@ Signed-off-by: Birger Koblitz <[email protected]>
  	.get_tunable    = aqr107_get_tunable,
  	.set_tunable    = aqr107_set_tunable,
  	.suspend        = aqr107_suspend,
-@@ -821,6 +865,24 @@ static struct phy_driver aqr_driver[] =
+@@ -772,6 +816,24 @@ static struct phy_driver aqr_driver[] =
  	.get_stats      = aqr107_get_stats,
  	.link_change_notify = aqr107_link_change_notify,
  },
@@ -110,7 +110,7 @@ Signed-off-by: Birger Koblitz <[email protected]>
  };
  
  module_phy_driver(aqr_driver);
-@@ -834,6 +896,7 @@ static struct mdio_device_id __maybe_unu
+@@ -785,6 +847,7 @@ static struct mdio_device_id __maybe_unu
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },

target/linux/generic/hack-5.15/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch

@@ -10,11 +10,11 @@ different firmware on the PHY.
 
 Signed-off-by: Alex Marginean <[email protected]>
 ---
- drivers/net/phy/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
+ drivers/net/phy/aquantia/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
  1 file changed, 88 insertions(+)
 
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
+--- a/drivers/net/phy/aquantia/aquantia_main.c
++++ b/drivers/net/phy/aquantia/aquantia_main.c
 @@ -24,6 +24,8 @@
  #define PHY_ID_AQR405	0x03a1b4b0
  #define PHY_ID_AQR113C	0x31c31c12
@@ -24,7 +24,7 @@ Signed-off-by: Alex Marginean <[email protected]>
  
  #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
  #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-@@ -151,6 +153,29 @@
+@@ -96,6 +98,29 @@
  #define AQR107_OP_IN_PROG_SLEEP		1000
  #define AQR107_OP_IN_PROG_TIMEOUT	100000
  
@@ -54,7 +54,7 @@ Signed-off-by: Alex Marginean <[email protected]>
  struct aqr107_hw_stat {
  	const char *name;
  	int reg;
-@@ -282,6 +307,51 @@ static int aqr_config_aneg(struct phy_de
+@@ -227,6 +252,51 @@ static int aqr_config_aneg(struct phy_de
  	return genphy_c45_check_and_restart_aneg(phydev, changed);
  }
  
@@ -106,7 +106,7 @@ Signed-off-by: Alex Marginean <[email protected]>
  static int aqr_config_intr(struct phy_device *phydev)
  {
  	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
-@@ -883,6 +953,30 @@ static struct phy_driver aqr_driver[] =
+@@ -834,6 +904,30 @@ static struct phy_driver aqr_driver[] =
  	.get_stats	= aqr107_get_stats,
  	.link_change_notify = aqr107_link_change_notify,
  },
@@ -137,7 +137,7 @@ Signed-off-by: Alex Marginean <[email protected]>
  };
  
  module_phy_driver(aqr_driver);
-@@ -897,6 +991,8 @@ static struct mdio_device_id __maybe_unu
+@@ -848,6 +942,8 @@ static struct mdio_device_id __maybe_unu
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },

target/linux/generic/hack-5.15/723-net-phy-aquantia-fix-system-side-protocol-mi.patch

@@ -9,12 +9,12 @@ these protocols leads to link issues on system side.
 
 Signed-off-by: Alex Marginean <[email protected]>
 ---
- drivers/net/phy/aquantia_main.c | 8 +++++++-
+ drivers/net/phy/aquantia/aquantia_main.c | 8 +++++++-
  1 file changed, 7 insertions(+), 1 deletion(-)
 
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
-@@ -340,10 +340,16 @@ static int aqr_config_aneg_set_prot(stru
+--- a/drivers/net/phy/aquantia/aquantia_main.c
++++ b/drivers/net/phy/aquantia/aquantia_main.c
+@@ -285,10 +285,16 @@ static int aqr_config_aneg_set_prot(stru
  	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
  		      aquantia_syscfg[if_type].start_rate);
  

target/linux/generic/hack-5.15/724-net-phy-aquantia-Add-AQR113-driver-support.patch

@@ -5,11 +5,11 @@ Subject: [PATCH] PONRTSYS-8842: aquantia: Add AQR113 driver support
 
 Add a new entry for AQR113 PHY_ID
 ---
- drivers/net/phy/aquantia_main.c | 10 ++++++++++
+ drivers/net/phy/aquantia/aquantia_main.c | 10 ++++++++++
  1 file changed, 10 insertions(+)
 
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
+--- a/drivers/net/phy/aquantia/aquantia_main.c
++++ b/drivers/net/phy/aquantia/aquantia_main.c
 @@ -26,6 +26,7 @@
  #define PHY_ID_AQR813	0x31c31cb2
  #define PHY_ID_AQR112	0x03a1b662
@@ -18,7 +18,7 @@ Add a new entry for AQR113 PHY_ID
  
  #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
  #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-@@ -972,6 +973,14 @@ static struct phy_driver aqr_driver[] =
+@@ -923,6 +924,14 @@ static struct phy_driver aqr_driver[] =
  	.get_stats	= aqr107_get_stats,
  },
  {
@@ -33,7 +33,7 @@ Add a new entry for AQR113 PHY_ID
  	PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
  	.name		= "Aquantia AQR412",
  	.probe		= aqr107_probe,
-@@ -999,6 +1008,7 @@ static struct mdio_device_id __maybe_unu
+@@ -950,6 +959,7 @@ static struct mdio_device_id __maybe_unu
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },

target/linux/generic/hack-5.15/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch

@@ -7,11 +7,11 @@ As advised by Ian Chang this PHY is used in Puzzle devices.
 
 Signed-off-by: Daniel Golle <[email protected]>
 ---
- drivers/net/phy/aquantia_main.c | 10 ++++++++++
+ drivers/net/phy/aquantia/aquantia_main.c | 10 ++++++++++
  1 file changed, 10 insertions(+)
 
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
+--- a/drivers/net/phy/aquantia/aquantia_main.c
++++ b/drivers/net/phy/aquantia/aquantia_main.c
 @@ -27,6 +27,8 @@
  #define PHY_ID_AQR112	0x03a1b662
  #define PHY_ID_AQR412	0x03a1b712
@@ -21,7 +21,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  
  #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
  #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-@@ -973,6 +975,30 @@ static struct phy_driver aqr_driver[] =
+@@ -924,6 +926,30 @@ static struct phy_driver aqr_driver[] =
  	.get_stats	= aqr107_get_stats,
  },
  {
@@ -52,7 +52,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  	PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
  	.name		= "Aquantia AQR113",
  	.config_aneg	= aqr_config_aneg,
-@@ -1009,6 +1035,8 @@ static struct mdio_device_id __maybe_unu
+@@ -960,6 +986,8 @@ static struct mdio_device_id __maybe_unu
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },

target/linux/generic/hack-5.15/726-net-phy-aquantia-enable-AQR111-and-AQR111B0.patch

@@ -10,8 +10,8 @@ This is a 5GbE chip but it reports support for 10G. Implement config_init()
 to set max speed to 5G.
 
 Signed-off-by: Thomas Kupper <[email protected]>
---- a/drivers/net/phy/aquantia_main.c
-+++ b/drivers/net/phy/aquantia_main.c
+--- a/drivers/net/phy/aquantia/aquantia_main.c
++++ b/drivers/net/phy/aquantia/aquantia_main.c
 @@ -24,6 +24,8 @@
  #define PHY_ID_AQR405	0x03a1b4b0
  #define PHY_ID_AQR113C	0x31c31c12
@@ -21,7 +21,7 @@ Signed-off-by: Thomas Kupper <[email protected]>
  #define PHY_ID_AQR112	0x03a1b662
  #define PHY_ID_AQR412	0x03a1b712
  #define PHY_ID_AQR113	0x31c31c40
-@@ -731,6 +733,33 @@ static int aqcs109_config_init(struct ph
+@@ -676,6 +678,33 @@ static int aqcs109_config_init(struct ph
  	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
  }
  
@@ -55,7 +55,7 @@ Signed-off-by: Thomas Kupper <[email protected]>
  static void aqr107_link_change_notify(struct phy_device *phydev)
  {
  	u8 fw_major, fw_minor;
-@@ -963,6 +992,42 @@ static struct phy_driver aqr_driver[] =
+@@ -914,6 +943,42 @@ static struct phy_driver aqr_driver[] =
  	.link_change_notify = aqr107_link_change_notify,
  },
  {
@@ -98,7 +98,7 @@ Signed-off-by: Thomas Kupper <[email protected]>
  	PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
  	.name		= "Aquantia AQR112",
  	.probe		= aqr107_probe,
-@@ -1032,6 +1097,8 @@ static struct mdio_device_id __maybe_unu
+@@ -983,6 +1048,8 @@ static struct mdio_device_id __maybe_unu
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
  	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },

target/linux/mediatek/patches-5.15/500-gsw-rtl8367s-mt7622-support.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -367,6 +367,12 @@ config ROCKCHIP_PHY
+@@ -364,6 +364,12 @@ config ROCKCHIP_PHY
  	help
  	  Currently supports the integrated Ethernet PHY.
  
@@ -15,7 +15,7 @@
  	help
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -95,6 +95,7 @@ obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
+@@ -91,6 +91,7 @@ obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
  obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
  obj-$(CONFIG_RENESAS_PHY)	+= uPD60620.o
  obj-$(CONFIG_ROCKCHIP_PHY)	+= rockchip.o

target/linux/mediatek/patches-5.15/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch

@@ -42,7 +42,7 @@ Signed-off-by: David S. Miller <[email protected]>
  L:	[email protected]
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -293,6 +293,18 @@ config MEDIATEK_GE_PHY
+@@ -290,6 +290,18 @@ config MEDIATEK_GE_PHY
  	help
  	  Supports the MediaTek Gigabit Ethernet PHYs.
  
@@ -63,7 +63,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	help
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -81,6 +81,7 @@ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+@@ -77,6 +77,7 @@ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
  obj-$(CONFIG_MARVELL_88X2222_PHY)	+= marvell-88x2222.o
  obj-$(CONFIG_MAXLINEAR_GPHY)	+= mxl-gpy.o
  obj-$(CONFIG_MEDIATEK_GE_PHY)	+= mediatek-ge.o

target/linux/mediatek/patches-5.15/733-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch

@@ -13,7 +13,7 @@ Signed-off-by: Daniel Golle <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -305,6 +305,13 @@ config MEDIATEK_GE_SOC_PHY
+@@ -302,6 +302,13 @@ config MEDIATEK_GE_SOC_PHY
  	  present in the SoCs efuse and will dynamically calibrate VCM
  	  (common-mode voltage) during startup.
  
@@ -29,7 +29,7 @@ Signed-off-by: Daniel Golle <[email protected]>
  	help
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -80,6 +80,7 @@ obj-$(CONFIG_MARVELL_10G_PHY)	+= marvell
+@@ -76,6 +76,7 @@ obj-$(CONFIG_MARVELL_10G_PHY)	+= marvell
  obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
  obj-$(CONFIG_MARVELL_88X2222_PHY)	+= marvell-88x2222.o
  obj-$(CONFIG_MAXLINEAR_GPHY)	+= mxl-gpy.o

target/linux/realtek/patches-5.15/705-add-rtl-phy.patch

@@ -14,7 +14,7 @@ Submitted-by: Birger Koblitz <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -357,6 +357,12 @@ config REALTEK_PHY
+@@ -354,6 +354,12 @@ config REALTEK_PHY
  	help
  	  Supports the Realtek 821x PHY.
  
@@ -29,7 +29,7 @@ Submitted-by: Birger Koblitz <[email protected]>
  	help
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -93,6 +93,7 @@ obj-$(CONFIG_NXP_C45_TJA11XX_PHY)	+= nxp
+@@ -89,6 +89,7 @@ obj-$(CONFIG_NXP_C45_TJA11XX_PHY)	+= nxp
  obj-$(CONFIG_NXP_TJA11XX_PHY)	+= nxp-tja11xx.o
  obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
  obj-$(CONFIG_REALTEK_PHY)	+= realtek.o