kernel: backport SSB/BCMA changes in preparation for a compat-wireless update

Signed-off-by: Felix Fietkau <[email protected]>

SVN-Revision: 36367

target/linux/brcm47xx/patches-3.6/060-ssb-add-serial-flash-driver.patch

@@ -476,7 +476,7 @@
  #define SSB_CHIPCO_BCAST_ADDR		0x0050
  #define SSB_CHIPCO_BCAST_DATA		0x0054
  #define SSB_CHIPCO_GPIOPULLUP		0x0058		/* Rev >= 20 only */
-@@ -503,7 +516,7 @@
+@@ -504,7 +517,7 @@
  #define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
  #define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
  #define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
@@ -485,7 +485,7 @@
  #define SSB_CHIPCO_FLASHCTL_ST_RES	0x03AB		/* Read Electronic Signature */
  #define SSB_CHIPCO_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
  #define SSB_CHIPCO_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
-@@ -594,6 +607,9 @@ struct ssb_chipcommon {
+@@ -595,6 +608,9 @@ struct ssb_chipcommon {
  	struct ssb_chipcommon_pmu pmu;
  	u32 ticks_per_ms;
  	u32 max_timer_ms;

target/linux/brcm47xx/patches-3.6/070-bcma-add-functions-to-write-to-serial-flash.patch

@@ -292,7 +292,7 @@
  	u32 id, id2;
  
  	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-@@ -150,6 +375,12 @@ int bcma_sflash_init(struct bcma_drv_cc
+@@ -150,6 +375,12 @@ int bcma_sflash_init(struct bcma_drv_cc 
  	sflash->numblocks = e->numblocks;
  	sflash->size = sflash->blocksize * sflash->numblocks;
  	sflash->present = true;
@@ -316,7 +316,7 @@
  /** ChipCommon core registers. **/
  #define BCMA_CC_ID			0x0000
  #define  BCMA_CC_ID_ID			0x0000FFFF
-@@ -519,17 +521,6 @@ struct bcma_pflash {
+@@ -520,17 +522,6 @@ struct bcma_pflash {
  	u32 window_size;
  };
  
@@ -334,7 +334,7 @@
  
  #ifdef CONFIG_BCMA_NFLASH
  struct mtd_info;
-@@ -564,7 +555,7 @@ struct bcma_drv_cc {
+@@ -565,7 +556,7 @@ struct bcma_drv_cc {
  #ifdef CONFIG_BCMA_DRIVER_MIPS
  	struct bcma_pflash pflash;
  #ifdef CONFIG_BCMA_SFLASH

target/linux/brcm47xx/patches-3.6/071-bcma-add-functions-to-write-to-nand-flash.patch

@@ -25,7 +25,7 @@
  	.num_resources	= 0,
  };
  
-@@ -31,6 +38,11 @@ int bcma_nflash_init(struct bcma_drv_cc
+@@ -31,6 +38,11 @@ int bcma_nflash_init(struct bcma_drv_cc 
  		return -ENODEV;
  	}
  
@@ -37,7 +37,7 @@
  	cc->nflash.present = true;
  	if (cc->core->id.rev == 38 &&
  	    (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT))
-@@ -42,3 +54,141 @@ int bcma_nflash_init(struct bcma_drv_cc
+@@ -42,3 +54,141 @@ int bcma_nflash_init(struct bcma_drv_cc 
  
  	return 0;
  }
@@ -189,7 +189,7 @@
  
  /** ChipCommon core registers. **/
  #define BCMA_CC_ID			0x0000
-@@ -522,17 +523,6 @@ struct bcma_pflash {
+@@ -523,17 +524,6 @@ struct bcma_pflash {
  };
  
  
@@ -207,7 +207,7 @@
  struct bcma_serial_port {
  	void *regs;
  	unsigned long clockspeed;
-@@ -558,7 +548,7 @@ struct bcma_drv_cc {
+@@ -559,7 +549,7 @@ struct bcma_drv_cc {
  	struct bcm47xx_sflash sflash;
  #endif
  #ifdef CONFIG_BCMA_NFLASH
@@ -216,7 +216,7 @@
  #endif
  
  	int nr_serial_ports;
-@@ -625,4 +615,13 @@ extern void bcma_chipco_regctl_maskset(s
+@@ -628,4 +618,13 @@ extern void bcma_chipco_regctl_maskset(s
  				       u32 offset, u32 mask, u32 set);
  extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
  

target/linux/brcm47xx/patches-3.6/235-bcma-dont-expose-mips-irq.patch

@@ -10,7 +10,7 @@
  #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
 --- a/drivers/bcma/driver_chipcommon.c
 +++ b/drivers/bcma/driver_chipcommon.c
-@@ -329,7 +329,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -332,7 +332,7 @@ void bcma_chipco_serial_init(struct bcma
  		return;
  	}
  
@@ -65,7 +65,7 @@
  	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
  
  	return 0;
-@@ -596,6 +596,6 @@ int bcma_core_pci_pcibios_map_irq(const
+@@ -596,6 +596,6 @@ int bcma_core_pci_pcibios_map_irq(const 
  
  	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
  			       pci_ops);

target/linux/brcm47xx/patches-3.6/750-bgmac.patch

@@ -43,7 +43,7 @@ Signed-off-by: David S. Miller <[email protected]>
 
 --- a/drivers/bcma/driver_chipcommon_pmu.c
 +++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -264,7 +264,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
+@@ -280,7 +280,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
  }
  
  /* query bus clock frequency for PMU-enabled chipcommon */
@@ -52,7 +52,7 @@ Signed-off-by: David S. Miller <[email protected]>
  {
  	struct bcma_bus *bus = cc->core->bus;
  
-@@ -293,6 +293,7 @@ static u32 bcma_pmu_get_bus_clock(struct
+@@ -309,6 +309,7 @@ static u32 bcma_pmu_get_bus_clock(struct
  	}
  	return BCMA_CC_PMU_HT_CLOCK;
  }
@@ -1969,7 +1969,7 @@ Signed-off-by: David S. Miller <[email protected]>
 +#endif /* _BGMAC_H */
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -624,4 +624,6 @@ int bcma_nflash_erase(struct bcma_drv_cc
+@@ -627,4 +627,6 @@ int bcma_nflash_erase(struct bcma_drv_cc
  int bcma_nflash_commit(struct bcma_drv_cc *cc, u32 offset, u32 len, const u8 *buf);
  #endif
  

target/linux/generic/patches-3.3/020-ssb_update.patch

@@ -404,7 +404,7 @@
  		/* We keep the default settings:
  		 * min_msk = 0xCBB
  		 * max_msk = 0x7FFFF
-@@ -607,3 +617,61 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
+@@ -607,3 +617,90 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
  
  EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
  EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
@@ -466,6 +466,35 @@
 +		return 0;
 +	}
 +}
++
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
++{
++	u32 pmu_ctl = 0;
++
++	switch (cc->dev->bus->chip_id) {
++	case 0x4322:
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
++		if (spuravoid == 1)
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
++		else
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
++		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++		break;
++	case 43222:
++		/* TODO: BCM43222 requires updating PLLs too */
++		return;
++	default:
++		ssb_printk(KERN_ERR PFX
++			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
++			   cc->dev->bus->chip_id);
++		return;
++	}
++
++	chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
++}
++EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
 --- /dev/null
 +++ b/drivers/ssb/driver_chipcommon_sflash.c
 @@ -0,0 +1,18 @@
@@ -765,7 +794,7 @@
 +}
 --- a/drivers/ssb/driver_mipscore.c
 +++ b/drivers/ssb/driver_mipscore.c
-@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
+@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct 
  {
  	struct ssb_bus *bus = mcore->dev->bus;
  
@@ -1031,7 +1060,26 @@
  
  static inline u8 ssb_crc8(u8 crc, u8 data)
  {
-@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss
+@@ -327,11 +339,25 @@ static s8 r123_extract_antgain(u8 sprom_
+ 	return (s8)gain;
+ }
+ 
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++	     SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
  {
  	int i;
  	u16 v;
@@ -1039,7 +1087,7 @@
  	u16 loc[3];
  
  	if (out->revision == 3)			/* rev 3 moved MAC */
-@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss
+@@ -361,8 +387,9 @@ static void sprom_extract_r123(struct ss
  	SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
  	SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
  	SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
@@ -1051,10 +1099,13 @@
  	SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
  	     SSB_SPROM1_BINF_ANTA_SHIFT);
  	SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
-@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss
+@@ -386,24 +413,19 @@ static void sprom_extract_r123(struct ss
+ 	     SSB_SPROM1_ITSSI_A_SHIFT);
+ 	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
  	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
- 	if (out->revision >= 2)
- 		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+-	if (out->revision >= 2)
+-		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
 +	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
 +	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
  
@@ -1079,10 +1130,12 @@
 +	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
 +						    SSB_SPROM1_AGAIN_A,
 +						    SSB_SPROM1_AGAIN_A_SHIFT);
++	if (out->revision >= 2)
++		sprom_extract_r23(out, in);
  }
  
  /* Revs 4 5 and 8 have partially shared layout */
-@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb
+@@ -464,14 +486,17 @@ static void sprom_extract_r45(struct ssb
  	SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
  	SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
  	     SSB_SPROM4_ETHPHY_ET1A_SHIFT);
@@ -1102,7 +1155,7 @@
  		SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
  		SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
  		SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
-@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb
+@@ -504,16 +529,14 @@ static void sprom_extract_r45(struct ssb
  	}
  
  	/* Extract the antenna gain values. */
@@ -1123,7 +1176,7 @@
  
  	sprom_extract_r458(out, in);
  
-@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb
+@@ -523,14 +546,22 @@ static void sprom_extract_r45(struct ssb
  static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
  {
  	int i;
@@ -1148,7 +1201,7 @@
  	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
  	SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
  	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-@@ -596,16 +611,46 @@ static void sprom_extract_r8(struct ssb_
+@@ -596,16 +627,46 @@ static void sprom_extract_r8(struct ssb_
  	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
  
  	/* Extract the antenna gain values. */
@@ -1201,7 +1254,7 @@
  
  	/* Extract FEM info */
  	SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
-@@ -630,6 +675,63 @@ static void sprom_extract_r8(struct ssb_
+@@ -630,6 +691,63 @@ static void sprom_extract_r8(struct ssb_
  	SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
  		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
  
@@ -1265,7 +1318,7 @@
  	sprom_extract_r458(out, in);
  
  	/* TODO - get remaining rev 8 stuff needed */
-@@ -759,7 +861,6 @@ static void ssb_pci_get_boardinfo(struct
+@@ -759,7 +877,6 @@ static void ssb_pci_get_boardinfo(struct
  {
  	bi->vendor = bus->host_pci->subsystem_vendor;
  	bi->type = bus->host_pci->subsystem_device;
@@ -1610,7 +1663,15 @@
  	struct list_head list;
 --- a/include/linux/ssb/ssb_driver_chipcommon.h
 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -504,7 +504,9 @@
+@@ -219,6 +219,7 @@
+ #define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
++#define  SSB_CHIPCO_PMU_CTL_PLL_UPD		0x00000400
+ #define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+ #define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+ #define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+@@ -504,7 +505,9 @@
  #define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
  #define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
  #define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
@@ -1621,7 +1682,7 @@
  
  /* Status register bits for ST flashes */
  #define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
-@@ -588,7 +590,10 @@ struct ssb_chipcommon {
+@@ -588,7 +591,10 @@ struct ssb_chipcommon {
  	u32 status;
  	/* Fast Powerup Delay constant */
  	u16 fast_pwrup_delay;
@@ -1632,7 +1693,7 @@
  };
  
  static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -628,8 +633,7 @@ enum ssb_clkmode {
+@@ -628,8 +634,7 @@ enum ssb_clkmode {
  extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
  				     enum ssb_clkmode mode);
  
@@ -1642,7 +1703,7 @@
  
  void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
  
-@@ -642,6 +646,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
+@@ -642,6 +647,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
  u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
  u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
  u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
@@ -1651,6 +1712,13 @@
  
  #ifdef CONFIG_SSB_SERIAL
  extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+@@ -661,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
+ void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ 			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
+ void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
+ 
+ #endif /* LINUX_SSB_CHIPCO_H_ */
 --- a/include/linux/ssb/ssb_driver_extif.h
 +++ b/include/linux/ssb/ssb_driver_extif.h
 @@ -152,12 +152,16 @@
@@ -1789,6 +1857,23 @@
  #define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
  #define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
  #define SSB_SPROM4_BFL2LO		0x0048	/* Board flags 2 (low 16 bits) */
+@@ -287,11 +289,11 @@
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
+-#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_ANTAVAIL		0x005C  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	8
+ #define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0
 @@ -389,6 +391,11 @@
  #define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
  #define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
@@ -1945,3 +2030,15 @@
 +	return wdt->driver_data;
 +}
 +#endif /* LINUX_BCM47XX_WDT_H_ */
+--- a/drivers/net/wireless/b43/phy_n.c
++++ b/drivers/net/wireless/b43/phy_n.c
+@@ -4259,7 +4259,8 @@ static void b43_nphy_pmu_spur_avoid(stru
+ #endif
+ #ifdef CONFIG_B43_SSB
+ 	case B43_BUS_SSB:
+-		/* FIXME */
++		ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
++					    avoid);
+ 		break;
+ #endif
+ 	}

target/linux/generic/patches-3.3/025-bcma_backport.patch

@@ -224,12 +224,12 @@
  #include <linux/bcma/bcma.h>
  
  static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
-@@ -22,20 +25,119 @@ static inline u32 bcma_cc_write32_masked
+@@ -22,20 +25,120 @@ static inline u32 bcma_cc_write32_masked
  	return value;
  }
  
 -void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
-+static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
  {
 -	u32 leddc_on = 10;
 -	u32 leddc_off = 90;
@@ -239,6 +239,7 @@
 -	if (cc->setup_done)
 +	return 20000000;
 +}
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
 +
 +static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
 +{
@@ -348,7 +349,7 @@
  	if (cc->core->id.rev >= 20) {
  		bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
  		bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
-@@ -44,7 +146,7 @@ void bcma_core_chipcommon_init(struct bc
+@@ -44,7 +147,7 @@ void bcma_core_chipcommon_init(struct bc
  	if (cc->capabilities & BCMA_CC_CAP_PMU)
  		bcma_pmu_init(cc);
  	if (cc->capabilities & BCMA_CC_CAP_PCTL)
@@ -357,7 +358,7 @@
  
  	if (cc->core->id.rev >= 16) {
  		if (cc->core->bus->sprom.leddc_on_time &&
-@@ -56,15 +158,33 @@ void bcma_core_chipcommon_init(struct bc
+@@ -56,15 +159,33 @@ void bcma_core_chipcommon_init(struct bc
  			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
  			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
  	}
@@ -394,7 +395,7 @@
  }
  
  void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
-@@ -84,28 +204,97 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+@@ -84,28 +205,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
  
  u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
  {
@@ -408,6 +409,7 @@
 +
 +	return res;
  }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
  
  u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
  {
@@ -421,6 +423,7 @@
 +
 +	return res;
  }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
  
 +/*
 + * If the bit is set to 0, chipcommon controlls this GPIO,
@@ -497,7 +500,7 @@
  }
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -118,8 +307,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -118,8 +310,7 @@ void bcma_chipco_serial_init(struct bcma
  	struct bcma_serial_port *ports = cc->serial_ports;
  
  	if (ccrev >= 11 && ccrev != 15) {
@@ -507,7 +510,7 @@
  		if (ccrev >= 21) {
  			/* Turn off UART clock before switching clocksource. */
  			bcma_cc_write32(cc, BCMA_CC_CORECTL,
-@@ -137,8 +325,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -137,8 +328,7 @@ void bcma_chipco_serial_init(struct bcma
  				       | BCMA_CC_CORECTL_UARTCLKEN);
  		}
  	} else {
@@ -748,7 +751,7 @@
  	if (cc->pmu.rev == 1)
  		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
  			      ~BCMA_CC_PMU_CTL_NOILPONW);
-@@ -174,37 +165,31 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -174,37 +165,47 @@ void bcma_pmu_init(struct bcma_drv_cc *c
  		bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
  			     BCMA_CC_PMU_CTL_NOILPONW);
  
@@ -774,21 +777,37 @@
 -	case 0x5357:
 -	case 0x4749:
 -	case 53572:
++	case BCMA_CHIP_ID_BCM4313:
++	case BCMA_CHIP_ID_BCM43224:
++	case BCMA_CHIP_ID_BCM43225:
++	case BCMA_CHIP_ID_BCM43227:
++	case BCMA_CHIP_ID_BCM43228:
++	case BCMA_CHIP_ID_BCM4331:
++	case BCMA_CHIP_ID_BCM43421:
++	case BCMA_CHIP_ID_BCM43428:
++	case BCMA_CHIP_ID_BCM43431:
 +	case BCMA_CHIP_ID_BCM4716:
-+	case BCMA_CHIP_ID_BCM4748:
 +	case BCMA_CHIP_ID_BCM47162:
-+	case BCMA_CHIP_ID_BCM4313:
-+	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4748:
 +	case BCMA_CHIP_ID_BCM4749:
++	case BCMA_CHIP_ID_BCM5357:
 +	case BCMA_CHIP_ID_BCM53572:
++	case BCMA_CHIP_ID_BCM6362:
  		/* always 20Mhz */
  		return 20000 * 1000;
 -	case 0x5356:
 -	case 0x5300:
-+	case BCMA_CHIP_ID_BCM5356:
 +	case BCMA_CHIP_ID_BCM4706:
++	case BCMA_CHIP_ID_BCM5356:
  		/* always 25Mhz */
  		return 25000 * 1000;
++	case BCMA_CHIP_ID_BCM43460:
++	case BCMA_CHIP_ID_BCM4352:
++	case BCMA_CHIP_ID_BCM4360:
++		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++			return 40000 * 1000;
++		else
++			return 20000 * 1000;
  	default:
 -		pr_warn("No ALP clock specified for %04X device, "
 -			"pmu rev. %d, using default %d Hz\n",
@@ -798,7 +817,7 @@
  	}
  	return BCMA_CC_PMU_ALP_CLOCK;
  }
-@@ -212,7 +197,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+@@ -212,7 +213,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
  /* Find the output of the "m" pll divider given pll controls that start with
   * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
   */
@@ -807,7 +826,7 @@
  {
  	u32 tmp, div, ndiv, p1, p2, fc;
  	struct bcma_bus *bus = cc->core->bus;
-@@ -221,7 +206,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -221,7 +222,8 @@ static u32 bcma_pmu_clock(struct bcma_dr
  
  	BUG_ON(!m || m > 4);
  
@@ -817,7 +836,7 @@
  		/* Detect failure in clock setting */
  		tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
  		if (tmp & 0x40000)
-@@ -240,60 +226,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -240,60 +242,95 @@ static u32 bcma_pmu_clock(struct bcma_dr
  	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
  
  	/* Do calculation in Mhz */
@@ -939,7 +958,7 @@
  			pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
  			break;
  		default:
-@@ -301,10 +322,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -301,10 +338,189 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
  			break;
  		}
  
@@ -996,7 +1015,7 @@
 +		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
 +		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
 +
-+		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
 +		break;
 +
 +	case BCMA_CHIP_ID_BCM4331:
@@ -1017,7 +1036,7 @@
 +			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 +						     0x03000a08);
 +		}
-+		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
 +		break;
 +
 +	case BCMA_CHIP_ID_BCM43224:
@@ -1050,7 +1069,7 @@
 +			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 +						     0x88888815);
 +		}
-+		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
 +		break;
 +
 +	case BCMA_CHIP_ID_BCM4716:
@@ -1084,7 +1103,7 @@
 +						     0x88888815);
 +		}
 +
-+		tmp = 3 << 9;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
 +		break;
 +
 +	case BCMA_CHIP_ID_BCM43227:
@@ -1120,7 +1139,7 @@
 +			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 +						     0x88888815);
 +		}
-+		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
 +		break;
 +	default:
 +		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
@@ -1555,7 +1574,7 @@
  		bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
  	}
  }
-@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips 
  	struct bcma_bus *bus = mcore->core->bus;
  
  	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
@@ -1913,7 +1932,7 @@
  }
  
  /**************************************************
-@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct
+@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct 
  
  static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
  {
@@ -2771,7 +2790,7 @@
  {
  	struct bcma_bus *bus = pci_get_drvdata(dev);
  
-@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct
+@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct 
  	pci_set_drvdata(dev, NULL);
  }
  
@@ -3212,12 +3231,12 @@
 +		break;
 +	default:
 +		return "UNKNOWN";
- 	}
++	}
 +
 +	for (i = 0; i < size; i++) {
 +		if (names[i].id == id->id)
 +			return names[i].name;
-+	}
+ 	}
 +
  	return "UNKNOWN";
  }
@@ -3601,71 +3620,7 @@
 +		SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
 +		SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
 +	}
- 
--	bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
--	     SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
--	bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
--	     SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
--	bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
--	     SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
--	bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
--	     SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
--
--	bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
--	     SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
--	bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
--	     SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
--	bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
--	     SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
--	bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
--	     SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
--
--	bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
--	     SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
--	bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
--	     SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
--	bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
--	     SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
--	bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
--	     SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
--
--	bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
--	     SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
--	bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
--	     SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
--	bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
--	     SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
--	bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
--	     SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
--
--	bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
--	bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
--	bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
--	bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
--
--	bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
--
--	bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
--		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
--	bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
--		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
--	bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
--		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
--	bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
--		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
--	bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
--		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
--
--	bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
--		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
--	bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
--		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
--	bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
--		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
--	bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
--		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
--	bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
--		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
++
 +	SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS,
 +	     SSB_SROM8_FEM_TSSIPOS_SHIFT);
 +	SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN,
@@ -3847,7 +3802,71 @@
 +	case BCMA_CHIP_ID_BCM4331:
 +		present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT;
 +		break;
-+
+ 
+-	bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+-	     SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
+-	bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+-	     SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
+-	bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+-	     SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
+-	bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+-	     SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
+-
+-	bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+-	     SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
+-	bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+-	     SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
+-	bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+-	     SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
+-	bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+-	     SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
+-
+-	bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+-	     SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
+-	bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+-	     SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
+-	bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+-	     SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
+-	bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+-	     SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
+-
+-	bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+-	     SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
+-	bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+-	     SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
+-	bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+-	     SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
+-	bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+-	     SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
+-
+-	bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+-	bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+-	bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+-	bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+-
+-	bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
+-
+-	bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+-		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+-	bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+-		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+-	bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+-		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+-	bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+-		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+-	bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+-		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+-
+-	bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+-		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+-	bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+-		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+-	bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+-		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+-	bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+-		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+-	bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+-		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
 +	default:
 +		return true;
 +	}
@@ -4176,7 +4195,7 @@
  #define BCMA_CC_IRQSTAT			0x0020
  #define BCMA_CC_IRQMASK			0x0024
  #define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
-@@ -79,6 +88,22 @@
+@@ -79,6 +88,23 @@
  #define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
  #define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
  #define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
@@ -4196,10 +4215,11 @@
 +#define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
 +#define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
 +#define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define  BCMA_CC_CHIPST_4360_XTAL_40MZ		0x00000001
  #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
  #define  BCMA_CC_JCMD_START		0x80000000
  #define  BCMA_CC_JCMD_BUSY		0x80000000
-@@ -108,10 +133,58 @@
+@@ -108,10 +134,58 @@
  #define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
  #define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
  #define BCMA_CC_FLASHCTL		0x0040
@@ -4258,7 +4278,7 @@
  #define BCMA_CC_BCAST_ADDR		0x0050
  #define BCMA_CC_BCAST_DATA		0x0054
  #define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
-@@ -181,6 +254,45 @@
+@@ -181,6 +255,45 @@
  #define BCMA_CC_FLASH_CFG		0x0128
  #define  BCMA_CC_FLASH_CFG_DS		0x0010	/* Data size, 0=8bit, 1=16bit */
  #define BCMA_CC_FLASH_WAITCNT		0x012C
@@ -4304,7 +4324,7 @@
  /* 0x1E0 is defined as shared BCMA_CLKCTLST */
  #define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
  #define BCMA_CC_UART0_DATA		0x0300
-@@ -240,7 +352,60 @@
+@@ -240,7 +353,60 @@
  #define BCMA_CC_PLLCTL_ADDR		0x0660
  #define BCMA_CC_PLLCTL_DATA		0x0664
  #define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
@@ -4366,7 +4386,7 @@
  
  /* Divider allocation in 4716/47162/5356 */
  #define BCMA_CC_PMU5_MAINPLL_CPU	1
-@@ -256,6 +421,15 @@
+@@ -256,6 +422,15 @@
  
  /* 4706 PMU */
  #define BCMA_CC_PMU4706_MAINPLL_PLL0	0
@@ -4382,7 +4402,7 @@
  
  /* ALP clock on pre-PMU chips */
  #define BCMA_CC_PMU_ALP_CLOCK		20000000
-@@ -284,6 +458,19 @@
+@@ -284,6 +459,19 @@
  #define BCMA_CC_PPL_PCHI_OFF		5
  #define BCMA_CC_PPL_PCHI_MASK		0x0000003f
  
@@ -4402,7 +4422,7 @@
  /* BCM4331 ChipControl numbers. */
  #define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
  #define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
-@@ -297,9 +484,25 @@
+@@ -297,9 +485,25 @@
  #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
  #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
  #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
@@ -4428,7 +4448,7 @@
  /* Data for the PMU, if available.
   * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
   */
-@@ -310,11 +513,35 @@ struct bcma_chipcommon_pmu {
+@@ -310,11 +514,35 @@ struct bcma_chipcommon_pmu {
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
  struct bcma_pflash {
@@ -4464,7 +4484,7 @@
  struct bcma_serial_port {
  	void *regs;
  	unsigned long clockspeed;
-@@ -330,15 +557,30 @@ struct bcma_drv_cc {
+@@ -330,15 +558,30 @@ struct bcma_drv_cc {
  	u32 capabilities;
  	u32 capabilities_ext;
  	u8 setup_done:1;
@@ -4495,7 +4515,7 @@
  };
  
  /* Register access */
-@@ -355,14 +597,14 @@ struct bcma_drv_cc {
+@@ -355,14 +598,16 @@ struct bcma_drv_cc {
  	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
  
  extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
@@ -4509,10 +4529,12 @@
 -extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
 -					  u32 ticks);
 +extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
++
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
  
  void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
  
-@@ -375,9 +617,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -375,9 +620,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
  u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
  u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
  u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
@@ -4525,7 +4547,7 @@
  
  extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
  				  u32 value);
-@@ -387,5 +632,6 @@ extern void bcma_chipco_chipctl_maskset(
+@@ -387,5 +635,6 @@ extern void bcma_chipco_chipctl_maskset(
  					u32 offset, u32 mask, u32 set);
  extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
  				       u32 offset, u32 mask, u32 set);

target/linux/generic/patches-3.6/020-ssb_update.patch

@@ -384,6 +384,39 @@
  u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
  {
  	struct ssb_bus *bus = cc->dev->bus;
+@@ -645,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ 		return 0;
+ 	}
+ }
++
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
++{
++	u32 pmu_ctl = 0;
++
++	switch (cc->dev->bus->chip_id) {
++	case 0x4322:
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
++		if (spuravoid == 1)
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
++		else
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
++		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++		break;
++	case 43222:
++		/* TODO: BCM43222 requires updating PLLs too */
++		return;
++	default:
++		ssb_printk(KERN_ERR PFX
++			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
++			   cc->dev->bus->chip_id);
++		return;
++	}
++
++	chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
++}
++EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
 --- /dev/null
 +++ b/drivers/ssb/driver_chipcommon_sflash.c
 @@ -0,0 +1,18 @@
@@ -683,7 +716,7 @@
 +}
 --- a/drivers/ssb/driver_mipscore.c
 +++ b/drivers/ssb/driver_mipscore.c
-@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
+@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct 
  {
  	struct ssb_bus *bus = mcore->dev->bus;
  
@@ -974,7 +1007,15 @@
  	struct list_head list;
 --- a/include/linux/ssb/ssb_driver_chipcommon.h
 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -504,7 +504,9 @@
+@@ -219,6 +219,7 @@
+ #define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
++#define  SSB_CHIPCO_PMU_CTL_PLL_UPD		0x00000400
+ #define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+ #define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+ #define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+@@ -504,7 +505,9 @@
  #define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
  #define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
  #define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
@@ -985,7 +1026,7 @@
  
  /* Status register bits for ST flashes */
  #define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
-@@ -588,7 +590,10 @@ struct ssb_chipcommon {
+@@ -588,7 +591,10 @@ struct ssb_chipcommon {
  	u32 status;
  	/* Fast Powerup Delay constant */
  	u16 fast_pwrup_delay;
@@ -996,7 +1037,7 @@
  };
  
  static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -628,8 +633,7 @@ enum ssb_clkmode {
+@@ -628,8 +634,7 @@ enum ssb_clkmode {
  extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
  				     enum ssb_clkmode mode);
  
@@ -1006,7 +1047,7 @@
  
  void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
  
-@@ -642,6 +646,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
+@@ -642,6 +647,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
  u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
  u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
  u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
@@ -1015,6 +1056,13 @@
  
  #ifdef CONFIG_SSB_SERIAL
  extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+@@ -661,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
+ void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ 			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
+ void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
+ 
+ #endif /* LINUX_SSB_CHIPCO_H_ */
 --- a/include/linux/ssb/ssb_driver_extif.h
 +++ b/include/linux/ssb/ssb_driver_extif.h
 @@ -152,12 +152,16 @@
@@ -1127,6 +1175,23 @@
  extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
 --- a/include/linux/ssb/ssb_regs.h
 +++ b/include/linux/ssb/ssb_regs.h
+@@ -289,11 +289,11 @@
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
+-#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_ANTAVAIL		0x005C  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	8
+ #define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0
 @@ -485,7 +485,7 @@
  #define  SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT	4
  #define  SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL	0x0020
@@ -1158,3 +1223,58 @@
 +	return wdt->driver_data;
 +}
 +#endif /* LINUX_BCM47XX_WDT_H_ */
+--- a/drivers/net/wireless/b43/phy_n.c
++++ b/drivers/net/wireless/b43/phy_n.c
+@@ -4583,7 +4583,8 @@ static void b43_nphy_pmu_spur_avoid(stru
+ #endif
+ #ifdef CONFIG_B43_SSB
+ 	case B43_BUS_SSB:
+-		/* FIXME */
++		ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
++					    avoid);
+ 		break;
+ #endif
+ 	}
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
+ 	return (s8)gain;
+ }
+ 
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++	     SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+ 	int i;
+@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
+ 	     SSB_SPROM1_ITSSI_A_SHIFT);
+ 	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ 	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+-	if (out->revision >= 2)
+-		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ 	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ 	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+ 
+@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
+ 	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ 						    SSB_SPROM1_AGAIN_A,
+ 						    SSB_SPROM1_AGAIN_A_SHIFT);
++	if (out->revision >= 2)
++		sprom_extract_r23(out, in);
+ }
+ 
+ /* Revs 4 5 and 8 have partially shared layout */

target/linux/generic/patches-3.6/025-bcma_backport.patch

@@ -126,12 +126,12 @@
  #include <linux/bcma/bcma.h>
  
  static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
-@@ -22,20 +25,119 @@ static inline u32 bcma_cc_write32_masked
+@@ -22,20 +25,120 @@ static inline u32 bcma_cc_write32_masked
  	return value;
  }
  
 -void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
-+static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
  {
 -	u32 leddc_on = 10;
 -	u32 leddc_off = 90;
@@ -141,6 +141,7 @@
 -	if (cc->setup_done)
 +	return 20000000;
 +}
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
 +
 +static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
 +{
@@ -250,7 +251,7 @@
  	if (cc->core->id.rev >= 20) {
  		bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
  		bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
-@@ -56,15 +158,33 @@ void bcma_core_chipcommon_init(struct bc
+@@ -56,15 +159,33 @@ void bcma_core_chipcommon_init(struct bc
  			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
  			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
  	}
@@ -287,7 +288,7 @@
  }
  
  void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
-@@ -84,28 +204,97 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+@@ -84,28 +205,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
  
  u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
  {
@@ -301,6 +302,7 @@
 +
 +	return res;
  }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
  
  u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
  {
@@ -314,6 +316,7 @@
 +
 +	return res;
  }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
  
 +/*
 + * If the bit is set to 0, chipcommon controlls this GPIO,
@@ -390,7 +393,7 @@
  }
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -118,8 +307,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -118,8 +310,7 @@ void bcma_chipco_serial_init(struct bcma
  	struct bcma_serial_port *ports = cc->serial_ports;
  
  	if (ccrev >= 11 && ccrev != 15) {
@@ -504,7 +507,7 @@
  	if (cc->pmu.rev == 1)
  		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
  			      ~BCMA_CC_PMU_CTL_NOILPONW);
-@@ -162,7 +169,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -162,24 +169,40 @@ void bcma_pmu_init(struct bcma_drv_cc *c
  	bcma_pmu_workarounds(cc);
  }
  
@@ -513,7 +516,44 @@
  {
  	struct bcma_bus *bus = cc->core->bus;
  
-@@ -190,7 +197,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+ 	switch (bus->chipinfo.id) {
++	case BCMA_CHIP_ID_BCM4313:
++	case BCMA_CHIP_ID_BCM43224:
++	case BCMA_CHIP_ID_BCM43225:
++	case BCMA_CHIP_ID_BCM43227:
++	case BCMA_CHIP_ID_BCM43228:
++	case BCMA_CHIP_ID_BCM4331:
++	case BCMA_CHIP_ID_BCM43421:
++	case BCMA_CHIP_ID_BCM43428:
++	case BCMA_CHIP_ID_BCM43431:
+ 	case BCMA_CHIP_ID_BCM4716:
+-	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM47162:
+-	case BCMA_CHIP_ID_BCM4313:
+-	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM4749:
++	case BCMA_CHIP_ID_BCM5357:
+ 	case BCMA_CHIP_ID_BCM53572:
++	case BCMA_CHIP_ID_BCM6362:
+ 		/* always 20Mhz */
+ 		return 20000 * 1000;
+-	case BCMA_CHIP_ID_BCM5356:
+ 	case BCMA_CHIP_ID_BCM4706:
++	case BCMA_CHIP_ID_BCM5356:
+ 		/* always 25Mhz */
+ 		return 25000 * 1000;
++	case BCMA_CHIP_ID_BCM43460:
++	case BCMA_CHIP_ID_BCM4352:
++	case BCMA_CHIP_ID_BCM4360:
++		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++			return 40000 * 1000;
++		else
++			return 20000 * 1000;
+ 	default:
+ 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+@@ -190,7 +213,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
  /* Find the output of the "m" pll divider given pll controls that start with
   * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
   */
@@ -522,7 +562,7 @@
  {
  	u32 tmp, div, ndiv, p1, p2, fc;
  	struct bcma_bus *bus = cc->core->bus;
-@@ -219,14 +226,14 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -219,14 +242,14 @@ static u32 bcma_pmu_clock(struct bcma_dr
  	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
  
  	/* Do calculation in Mhz */
@@ -539,7 +579,7 @@
  {
  	u32 tmp, ndiv, p1div, p2div;
  	u32 clock;
-@@ -257,7 +264,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
+@@ -257,7 +280,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
  }
  
  /* query bus clock frequency for PMU-enabled chipcommon */
@@ -548,7 +588,7 @@
  {
  	struct bcma_bus *bus = cc->core->bus;
  
-@@ -265,40 +272,42 @@ u32 bcma_pmu_get_clockcontrol(struct bcm
+@@ -265,40 +288,42 @@ u32 bcma_pmu_get_clockcontrol(struct bcm
  	case BCMA_CHIP_ID_BCM4716:
  	case BCMA_CHIP_ID_BCM4748:
  	case BCMA_CHIP_ID_BCM47162:
@@ -602,7 +642,7 @@
  						BCMA_CC_PMU4706_MAINPLL_PLL0,
  						BCMA_CC_PMU5_MAINPLL_CPU);
  		case BCMA_CHIP_ID_BCM5356:
-@@ -313,10 +322,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -313,10 +338,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
  			break;
  		}
  
@@ -616,6 +656,51 @@
  }
  
  static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
+@@ -362,7 +388,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+ 
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4331:
+@@ -383,7 +409,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 						     0x03000a08);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43224:
+@@ -416,7 +442,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4716:
+@@ -450,7 +476,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 						     0x88888815);
+ 		}
+ 
+-		tmp = 3 << 9;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43227:
+@@ -486,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 	default:
+ 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
 --- a/drivers/bcma/driver_chipcommon_sflash.c
 +++ b/drivers/bcma/driver_chipcommon_sflash.c
 @@ -5,15 +5,161 @@
@@ -990,7 +1075,7 @@
  	for (i = 0; i <= 6; i++)
  		printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
  	printk("\n");
-@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips 
  	struct bcma_bus *bus = mcore->core->bus;
  
  	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
@@ -1176,7 +1261,7 @@
  	}
  	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
  	return ret;
-@@ -132,7 +132,7 @@ static void bcma_pcie_mdio_write(struct
+@@ -132,7 +132,7 @@ static void bcma_pcie_mdio_write(struct 
  		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
  		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
  			break;
@@ -1613,15 +1698,16 @@
  /** ChipCommon core registers. **/
  #define BCMA_CC_ID			0x0000
  #define  BCMA_CC_ID_ID			0x0000FFFF
-@@ -100,6 +103,7 @@
+@@ -100,6 +103,8 @@
  #define  BCMA_CC_CHIPST_4706_SFLASH_TYPE	BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
  #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
  #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
 +#define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define  BCMA_CC_CHIPST_4360_XTAL_40MZ		0x00000001
  #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
  #define  BCMA_CC_JCMD_START		0x80000000
  #define  BCMA_CC_JCMD_BUSY		0x80000000
-@@ -266,6 +270,29 @@
+@@ -266,6 +271,29 @@
  #define  BCMA_CC_SROM_CONTROL_SIZE_16K	0x00000004
  #define  BCMA_CC_SROM_CONTROL_SIZE_SHIFT	1
  #define  BCMA_CC_SROM_CONTROL_PRESENT	0x00000001
@@ -1651,7 +1737,7 @@
  /* 0x1E0 is defined as shared BCMA_CLKCTLST */
  #define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
  #define BCMA_CC_UART0_DATA		0x0300
-@@ -325,6 +352,60 @@
+@@ -325,6 +353,60 @@
  #define BCMA_CC_PLLCTL_ADDR		0x0660
  #define BCMA_CC_PLLCTL_DATA		0x0664
  #define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
@@ -1712,7 +1798,7 @@
  
  /* Divider allocation in 4716/47162/5356 */
  #define BCMA_CC_PMU5_MAINPLL_CPU	1
-@@ -415,6 +496,13 @@
+@@ -415,6 +497,13 @@
  /* 4313 Chip specific ChipControl register bits */
  #define BCMA_CCTRL_4313_12MA_LED_DRIVE		0x00000007	/* 12 mA drive strengh for later 4313 */
  
@@ -1726,7 +1812,7 @@
  /* Data for the PMU, if available.
   * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
   */
-@@ -425,11 +513,35 @@ struct bcma_chipcommon_pmu {
+@@ -425,11 +514,35 @@ struct bcma_chipcommon_pmu {
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
  struct bcma_pflash {
@@ -1762,7 +1848,7 @@
  struct bcma_serial_port {
  	void *regs;
  	unsigned long clockspeed;
-@@ -445,15 +557,30 @@ struct bcma_drv_cc {
+@@ -445,15 +558,30 @@ struct bcma_drv_cc {
  	u32 capabilities;
  	u32 capabilities_ext;
  	u8 setup_done:1;
@@ -1793,7 +1879,7 @@
  };
  
  /* Register access */
-@@ -470,14 +597,14 @@ struct bcma_drv_cc {
+@@ -470,14 +598,16 @@ struct bcma_drv_cc {
  	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
  
  extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
@@ -1807,10 +1893,12 @@
 -extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
 -					  u32 ticks);
 +extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
++
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
  
  void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
  
-@@ -490,9 +617,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -490,9 +620,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
  u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
  u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
  u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);

target/linux/generic/patches-3.7/020-ssb_update.patch

@@ -384,6 +384,39 @@
  u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
  {
  	struct ssb_bus *bus = cc->dev->bus;
+@@ -645,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ 		return 0;
+ 	}
+ }
++
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
++{
++	u32 pmu_ctl = 0;
++
++	switch (cc->dev->bus->chip_id) {
++	case 0x4322:
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
++		if (spuravoid == 1)
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
++		else
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
++		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++		break;
++	case 43222:
++		/* TODO: BCM43222 requires updating PLLs too */
++		return;
++	default:
++		ssb_printk(KERN_ERR PFX
++			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
++			   cc->dev->bus->chip_id);
++		return;
++	}
++
++	chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
++}
++EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
 --- /dev/null
 +++ b/drivers/ssb/driver_chipcommon_sflash.c
 @@ -0,0 +1,18 @@
@@ -683,7 +716,7 @@
 +}
 --- a/drivers/ssb/driver_mipscore.c
 +++ b/drivers/ssb/driver_mipscore.c
-@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct
+@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct 
  {
  	struct ssb_bus *bus = mcore->dev->bus;
  
@@ -973,7 +1006,15 @@
  	struct list_head list;
 --- a/include/linux/ssb/ssb_driver_chipcommon.h
 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -590,7 +590,10 @@ struct ssb_chipcommon {
+@@ -219,6 +219,7 @@
+ #define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
++#define  SSB_CHIPCO_PMU_CTL_PLL_UPD		0x00000400
+ #define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+ #define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+ #define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+@@ -590,7 +591,10 @@ struct ssb_chipcommon {
  	u32 status;
  	/* Fast Powerup Delay constant */
  	u16 fast_pwrup_delay;
@@ -984,7 +1025,7 @@
  };
  
  static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -630,8 +633,7 @@ enum ssb_clkmode {
+@@ -630,8 +634,7 @@ enum ssb_clkmode {
  extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
  				     enum ssb_clkmode mode);
  
@@ -994,7 +1035,7 @@
  
  void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
  
-@@ -644,6 +646,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
+@@ -644,6 +647,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
  u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
  u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
  u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
@@ -1003,6 +1044,13 @@
  
  #ifdef CONFIG_SSB_SERIAL
  extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
+@@ -663,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
+ void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ 			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
+ void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
+ 
+ #endif /* LINUX_SSB_CHIPCO_H_ */
 --- a/include/linux/ssb/ssb_driver_extif.h
 +++ b/include/linux/ssb/ssb_driver_extif.h
 @@ -152,12 +152,16 @@
@@ -1115,6 +1163,23 @@
  extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
 --- a/include/linux/ssb/ssb_regs.h
 +++ b/include/linux/ssb/ssb_regs.h
+@@ -289,11 +289,11 @@
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
+-#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_ANTAVAIL		0x005C  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	8
+ #define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0
 @@ -485,7 +485,7 @@
  #define  SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT	4
  #define  SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL	0x0020
@@ -1146,3 +1211,58 @@
 +	return wdt->driver_data;
 +}
 +#endif /* LINUX_BCM47XX_WDT_H_ */
+--- a/drivers/net/wireless/b43/phy_n.c
++++ b/drivers/net/wireless/b43/phy_n.c
+@@ -5165,7 +5165,8 @@ static void b43_nphy_pmu_spur_avoid(stru
+ #endif
+ #ifdef CONFIG_B43_SSB
+ 	case B43_BUS_SSB:
+-		/* FIXME */
++		ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
++					    avoid);
+ 		break;
+ #endif
+ 	}
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
+ 	return (s8)gain;
+ }
+ 
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++	     SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+ 	int i;
+@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
+ 	     SSB_SPROM1_ITSSI_A_SHIFT);
+ 	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ 	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+-	if (out->revision >= 2)
+-		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ 	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ 	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+ 
+@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
+ 	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ 						    SSB_SPROM1_AGAIN_A,
+ 						    SSB_SPROM1_AGAIN_A_SHIFT);
++	if (out->revision >= 2)
++		sprom_extract_r23(out, in);
+ }
+ 
+ /* Revs 4 5 and 8 have partially shared layout */

target/linux/generic/patches-3.7/025-bcma_backport.patch

@@ -87,12 +87,12 @@
  #include <linux/bcma/bcma.h>
  
  static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
-@@ -22,20 +25,119 @@ static inline u32 bcma_cc_write32_masked
+@@ -22,20 +25,120 @@ static inline u32 bcma_cc_write32_masked
  	return value;
  }
  
 -void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
-+static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
  {
 -	u32 leddc_on = 10;
 -	u32 leddc_off = 90;
@@ -102,6 +102,7 @@
 -	if (cc->setup_done)
 +	return 20000000;
 +}
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
 +
 +static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
 +{
@@ -211,7 +212,7 @@
  	if (cc->core->id.rev >= 20) {
  		bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
  		bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
-@@ -56,15 +158,33 @@ void bcma_core_chipcommon_init(struct bc
+@@ -56,15 +159,33 @@ void bcma_core_chipcommon_init(struct bc
  			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
  			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
  	}
@@ -248,7 +249,7 @@
  }
  
  void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
-@@ -84,28 +204,97 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
+@@ -84,28 +205,99 @@ u32 bcma_chipco_gpio_in(struct bcma_drv_
  
  u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
  {
@@ -262,6 +263,7 @@
 +
 +	return res;
  }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
  
  u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
  {
@@ -275,6 +277,7 @@
 +
 +	return res;
  }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
  
 +/*
 + * If the bit is set to 0, chipcommon controlls this GPIO,
@@ -351,7 +354,7 @@
  }
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -118,8 +307,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -118,8 +310,7 @@ void bcma_chipco_serial_init(struct bcma
  	struct bcma_serial_port *ports = cc->serial_ports;
  
  	if (ccrev >= 11 && ccrev != 15) {
@@ -363,7 +366,7 @@
  			bcma_cc_write32(cc, BCMA_CC_CORECTL,
 --- a/drivers/bcma/driver_chipcommon_nflash.c
 +++ b/drivers/bcma/driver_chipcommon_nflash.c
-@@ -32,6 +32,9 @@ int bcma_nflash_init(struct bcma_drv_cc
+@@ -32,6 +32,9 @@ int bcma_nflash_init(struct bcma_drv_cc 
  	}
  
  	cc->nflash.present = true;
@@ -390,7 +393,7 @@
  
  void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
  {
-@@ -144,7 +145,7 @@ static void bcma_pmu_workarounds(struct
+@@ -144,7 +145,7 @@ static void bcma_pmu_workarounds(struct 
  	}
  }
  
@@ -410,7 +413,7 @@
  	if (cc->pmu.rev == 1)
  		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
  			      ~BCMA_CC_PMU_CTL_NOILPONW);
-@@ -165,7 +169,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
+@@ -165,24 +169,40 @@ void bcma_pmu_init(struct bcma_drv_cc *c
  	bcma_pmu_workarounds(cc);
  }
  
@@ -419,7 +422,44 @@
  {
  	struct bcma_bus *bus = cc->core->bus;
  
-@@ -193,7 +197,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
+ 	switch (bus->chipinfo.id) {
++	case BCMA_CHIP_ID_BCM4313:
++	case BCMA_CHIP_ID_BCM43224:
++	case BCMA_CHIP_ID_BCM43225:
++	case BCMA_CHIP_ID_BCM43227:
++	case BCMA_CHIP_ID_BCM43228:
++	case BCMA_CHIP_ID_BCM4331:
++	case BCMA_CHIP_ID_BCM43421:
++	case BCMA_CHIP_ID_BCM43428:
++	case BCMA_CHIP_ID_BCM43431:
+ 	case BCMA_CHIP_ID_BCM4716:
+-	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM47162:
+-	case BCMA_CHIP_ID_BCM4313:
+-	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM4749:
++	case BCMA_CHIP_ID_BCM5357:
+ 	case BCMA_CHIP_ID_BCM53572:
++	case BCMA_CHIP_ID_BCM6362:
+ 		/* always 20Mhz */
+ 		return 20000 * 1000;
+-	case BCMA_CHIP_ID_BCM5356:
+ 	case BCMA_CHIP_ID_BCM4706:
++	case BCMA_CHIP_ID_BCM5356:
+ 		/* always 25Mhz */
+ 		return 25000 * 1000;
++	case BCMA_CHIP_ID_BCM43460:
++	case BCMA_CHIP_ID_BCM4352:
++	case BCMA_CHIP_ID_BCM4360:
++		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++			return 40000 * 1000;
++		else
++			return 20000 * 1000;
+ 	default:
+ 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+@@ -193,7 +213,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
  /* Find the output of the "m" pll divider given pll controls that start with
   * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
   */
@@ -428,7 +468,7 @@
  {
  	u32 tmp, div, ndiv, p1, p2, fc;
  	struct bcma_bus *bus = cc->core->bus;
-@@ -222,14 +226,14 @@ static u32 bcma_pmu_clock(struct bcma_dr
+@@ -222,14 +242,14 @@ static u32 bcma_pmu_clock(struct bcma_dr
  	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
  
  	/* Do calculation in Mhz */
@@ -445,7 +485,7 @@
  {
  	u32 tmp, ndiv, p1div, p2div;
  	u32 clock;
-@@ -260,7 +264,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
+@@ -260,7 +280,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
  }
  
  /* query bus clock frequency for PMU-enabled chipcommon */
@@ -454,7 +494,7 @@
  {
  	struct bcma_bus *bus = cc->core->bus;
  
-@@ -268,40 +272,42 @@ static u32 bcma_pmu_get_clockcontrol(str
+@@ -268,40 +288,42 @@ static u32 bcma_pmu_get_clockcontrol(str
  	case BCMA_CHIP_ID_BCM4716:
  	case BCMA_CHIP_ID_BCM4748:
  	case BCMA_CHIP_ID_BCM47162:
@@ -508,7 +548,7 @@
  						BCMA_CC_PMU4706_MAINPLL_PLL0,
  						BCMA_CC_PMU5_MAINPLL_CPU);
  		case BCMA_CHIP_ID_BCM5356:
-@@ -316,10 +322,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
+@@ -316,10 +338,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
  			break;
  		}
  
@@ -522,6 +562,51 @@
  }
  
  static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
+@@ -365,7 +388,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+ 
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4331:
+@@ -386,7 +409,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 						     0x03000a08);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43224:
+@@ -419,7 +442,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4716:
+@@ -453,7 +476,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 						     0x88888815);
+ 		}
+ 
+-		tmp = 3 << 9;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43227:
+@@ -489,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 	default:
+ 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
 --- a/drivers/bcma/driver_chipcommon_sflash.c
 +++ b/drivers/bcma/driver_chipcommon_sflash.c
 @@ -12,7 +12,7 @@
@@ -577,7 +662,7 @@
  	{ 0 },
  };
  
-@@ -84,6 +111,8 @@ int bcma_sflash_init(struct bcma_drv_cc
+@@ -84,6 +111,8 @@ int bcma_sflash_init(struct bcma_drv_cc 
  					break;
  			}
  			break;
@@ -586,7 +671,7 @@
  		default:
  			for (e = bcma_sflash_st_tbl; e->name; e++) {
  				if (e->id == id)
-@@ -116,7 +145,7 @@ int bcma_sflash_init(struct bcma_drv_cc
+@@ -116,7 +145,7 @@ int bcma_sflash_init(struct bcma_drv_cc 
  		return -ENOTSUPP;
  	}
  
@@ -800,7 +885,7 @@
  	for (i = 0; i <= 6; i++)
  		printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
  	printk("\n");
-@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips 
  	struct bcma_bus *bus = mcore->core->bus;
  
  	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
@@ -1252,7 +1337,15 @@
  /** ChipCommon core registers. **/
  #define BCMA_CC_ID			0x0000
  #define  BCMA_CC_ID_ID			0x0000FFFF
-@@ -510,6 +513,7 @@ struct bcma_chipcommon_pmu {
+@@ -101,6 +104,7 @@
+ #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
+ #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
+ #define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define  BCMA_CC_CHIPST_4360_XTAL_40MZ		0x00000001
+ #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+ #define  BCMA_CC_JCMD_START		0x80000000
+ #define  BCMA_CC_JCMD_BUSY		0x80000000
+@@ -510,6 +514,7 @@ struct bcma_chipcommon_pmu {
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
  struct bcma_pflash {
@@ -1260,7 +1353,7 @@
  	u8 buswidth;
  	u32 window;
  	u32 window_size;
-@@ -532,6 +536,7 @@ struct mtd_info;
+@@ -532,6 +537,7 @@ struct mtd_info;
  
  struct bcma_nflash {
  	bool present;
@@ -1268,7 +1361,7 @@
  
  	struct mtd_info *mtd;
  };
-@@ -552,6 +557,7 @@ struct bcma_drv_cc {
+@@ -552,6 +558,7 @@ struct bcma_drv_cc {
  	u32 capabilities;
  	u32 capabilities_ext;
  	u8 setup_done:1;
@@ -1276,7 +1369,7 @@
  	/* Fast Powerup Delay constant */
  	u16 fast_pwrup_delay;
  	struct bcma_chipcommon_pmu pmu;
-@@ -567,6 +573,14 @@ struct bcma_drv_cc {
+@@ -567,6 +574,14 @@ struct bcma_drv_cc {
  	int nr_serial_ports;
  	struct bcma_serial_port serial_ports[4];
  #endif /* CONFIG_BCMA_DRIVER_MIPS */
@@ -1291,7 +1384,7 @@
  };
  
  /* Register access */
-@@ -583,14 +597,14 @@ struct bcma_drv_cc {
+@@ -583,14 +598,16 @@ struct bcma_drv_cc {
  	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
  
  extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
@@ -1305,10 +1398,12 @@
 -extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
 -					  u32 ticks);
 +extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
++
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
  
  void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
  
-@@ -603,9 +617,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+@@ -603,9 +620,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
  u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
  u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
  u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);

target/linux/generic/patches-3.8/020-ssb_update.patch

@@ -167,7 +167,7 @@
 +}
 --- a/drivers/ssb/driver_gpio.c
 +++ b/drivers/ssb/driver_gpio.c
-@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct
+@@ -74,6 +74,16 @@ static void ssb_gpio_chipco_free(struct 
  	ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
  }
  
@@ -253,7 +253,7 @@
  
  static inline u32 mips_read32(struct ssb_mipscore *mcore,
  			      u16 offset)
-@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct
+@@ -189,34 +209,43 @@ static void ssb_mips_serial_init(struct 
  static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
  {
  	struct ssb_bus *bus = mcore->dev->bus;
@@ -363,3 +363,129 @@
  #endif /* CONFIG_SSB_DRIVER_MIPS */
  
  #endif /* LINUX_SSB_MIPSCORE_H_ */
+--- a/drivers/net/wireless/b43/phy_n.c
++++ b/drivers/net/wireless/b43/phy_n.c
+@@ -5165,7 +5165,8 @@ static void b43_nphy_pmu_spur_avoid(stru
+ #endif
+ #ifdef CONFIG_B43_SSB
+ 	case B43_BUS_SSB:
+-		/* FIXME */
++		ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
++					    avoid);
+ 		break;
+ #endif
+ 	}
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -675,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ 		return 0;
+ 	}
+ }
++
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
++{
++	u32 pmu_ctl = 0;
++
++	switch (cc->dev->bus->chip_id) {
++	case 0x4322:
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
++		if (spuravoid == 1)
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
++		else
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
++		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++		break;
++	case 43222:
++		/* TODO: BCM43222 requires updating PLLs too */
++		return;
++	default:
++		ssb_printk(KERN_ERR PFX
++			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
++			   cc->dev->bus->chip_id);
++		return;
++	}
++
++	chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
++}
++EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
+ 	return (s8)gain;
+ }
+ 
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++	     SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+ 	int i;
+@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
+ 	     SSB_SPROM1_ITSSI_A_SHIFT);
+ 	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ 	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+-	if (out->revision >= 2)
+-		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ 	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ 	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+ 
+@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
+ 	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ 						    SSB_SPROM1_AGAIN_A,
+ 						    SSB_SPROM1_AGAIN_A_SHIFT);
++	if (out->revision >= 2)
++		sprom_extract_r23(out, in);
+ }
+ 
+ /* Revs 4 5 and 8 have partially shared layout */
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -219,6 +219,7 @@
+ #define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
++#define  SSB_CHIPCO_PMU_CTL_PLL_UPD		0x00000400
+ #define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+ #define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+ #define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+@@ -667,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
+ void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ 			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
+ void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
+ 
+ #endif /* LINUX_SSB_CHIPCO_H_ */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -289,11 +289,11 @@
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
+-#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_ANTAVAIL		0x005C  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	8
+ #define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0

target/linux/generic/patches-3.8/025-bcma_backport.patch

@@ -30,7 +30,39 @@
  /* driver_chipcommon_pmu.c */
 --- a/drivers/bcma/driver_chipcommon.c
 +++ b/drivers/bcma/driver_chipcommon.c
-@@ -329,7 +329,7 @@ void bcma_chipco_serial_init(struct bcma
+@@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked
+ 	return value;
+ }
+ 
+-static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
+ {
+ 	if (cc->capabilities & BCMA_CC_CAP_PMU)
+ 		return bcma_pmu_get_alp_clock(cc);
+ 
+ 	return 20000000;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
+ 
+ static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
+ {
+@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
+ 
+ 	return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
+ 
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+ 
+ 	return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
+ 
+ /*
+  * If the bit is set to 0, chipcommon controlls this GPIO,
+@@ -329,7 +332,7 @@ void bcma_chipco_serial_init(struct bcma
  		return;
  	}
  
@@ -526,7 +558,7 @@
  		return cap_ptr;
  
  	/* check if the capability pointer field exists */
-@@ -426,7 +429,7 @@ void bcma_core_pci_hostmode_init(struct
+@@ -426,7 +429,7 @@ void bcma_core_pci_hostmode_init(struct 
  	/* Reset RC */
  	usleep_range(3000, 5000);
  	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
@@ -535,7 +567,7 @@
  	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
  			BCMA_CORE_PCI_CTL_RST_OE);
  
-@@ -488,6 +491,17 @@ void bcma_core_pci_hostmode_init(struct
+@@ -488,6 +491,17 @@ void bcma_core_pci_hostmode_init(struct 
  
  	bcma_core_pci_enable_crs(pc);
  
@@ -562,7 +594,7 @@
  	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
  
  	return 0;
-@@ -595,6 +609,6 @@ int bcma_core_pci_pcibios_map_irq(const
+@@ -595,6 +609,6 @@ int bcma_core_pci_pcibios_map_irq(const 
  
  	pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
  			       pci_ops);
@@ -609,6 +641,23 @@
  #define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
  #define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
  #define   BCMA_PLLTYPE_NONE		0x00000000
+@@ -104,6 +104,7 @@
+ #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
+ #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
+ #define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define  BCMA_CC_CHIPST_4360_XTAL_40MZ		0x00000001
+ #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+ #define  BCMA_CC_JCMD_START		0x80000000
+ #define  BCMA_CC_JCMD_BUSY		0x80000000
+@@ -606,6 +607,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+ 
+ extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
+ 
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
++
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ 
+ u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
 --- a/include/linux/bcma/bcma_driver_mips.h
 +++ b/include/linux/bcma/bcma_driver_mips.h
 @@ -28,6 +28,7 @@
@@ -657,3 +706,90 @@
  /* PCIE Root Capability Register bits (Host mode only) */
  #define BCMA_CORE_PCI_RC_CRS_VISIBILITY		0x0001
  
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
+ 	struct bcma_bus *bus = cc->core->bus;
+ 
+ 	switch (bus->chipinfo.id) {
++	case BCMA_CHIP_ID_BCM4313:
++	case BCMA_CHIP_ID_BCM43224:
++	case BCMA_CHIP_ID_BCM43225:
++	case BCMA_CHIP_ID_BCM43227:
++	case BCMA_CHIP_ID_BCM43228:
++	case BCMA_CHIP_ID_BCM4331:
++	case BCMA_CHIP_ID_BCM43421:
++	case BCMA_CHIP_ID_BCM43428:
++	case BCMA_CHIP_ID_BCM43431:
+ 	case BCMA_CHIP_ID_BCM4716:
+-	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM47162:
+-	case BCMA_CHIP_ID_BCM4313:
+-	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM4749:
++	case BCMA_CHIP_ID_BCM5357:
+ 	case BCMA_CHIP_ID_BCM53572:
++	case BCMA_CHIP_ID_BCM6362:
+ 		/* always 20Mhz */
+ 		return 20000 * 1000;
+-	case BCMA_CHIP_ID_BCM5356:
+ 	case BCMA_CHIP_ID_BCM4706:
++	case BCMA_CHIP_ID_BCM5356:
+ 		/* always 25Mhz */
+ 		return 25000 * 1000;
++	case BCMA_CHIP_ID_BCM43460:
++	case BCMA_CHIP_ID_BCM4352:
++	case BCMA_CHIP_ID_BCM4360:
++		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++			return 40000 * 1000;
++		else
++			return 20000 * 1000;
+ 	default:
+ 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+@@ -372,7 +388,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+ 
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4331:
+@@ -393,7 +409,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 						     0x03000a08);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43224:
+@@ -426,7 +442,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4716:
+@@ -460,7 +476,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 						     0x88888815);
+ 		}
+ 
+-		tmp = 3 << 9;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43227:
+@@ -496,7 +512,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 	default:
+ 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",

target/linux/generic/patches-3.9/020-ssb_backport.patch

@@ -0,0 +1,126 @@
+--- a/drivers/net/wireless/b43/phy_n.c
++++ b/drivers/net/wireless/b43/phy_n.c
+@@ -5165,7 +5165,8 @@ static void b43_nphy_pmu_spur_avoid(stru
+ #endif
+ #ifdef CONFIG_B43_SSB
+ 	case B43_BUS_SSB:
+-		/* FIXME */
++		ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
++					    avoid);
+ 		break;
+ #endif
+ 	}
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -675,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_
+ 		return 0;
+ 	}
+ }
++
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
++{
++	u32 pmu_ctl = 0;
++
++	switch (cc->dev->bus->chip_id) {
++	case 0x4322:
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
++		ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
++		if (spuravoid == 1)
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
++		else
++			ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
++		pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
++		break;
++	case 43222:
++		/* TODO: BCM43222 requires updating PLLs too */
++		return;
++	default:
++		ssb_printk(KERN_ERR PFX
++			   "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
++			   cc->dev->bus->chip_id);
++		return;
++	}
++
++	chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
++}
++EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_
+ 	return (s8)gain;
+ }
+ 
++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
++{
++	SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++	SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
++	SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
++	SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
++	SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
++	SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
++	SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
++	SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
++	SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
++	SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
++	     SSB_SPROM2_MAXP_A_LO_SHIFT);
++}
++
+ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
+ {
+ 	int i;
+@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss
+ 	     SSB_SPROM1_ITSSI_A_SHIFT);
+ 	SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
+ 	SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+-	if (out->revision >= 2)
+-		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++
+ 	SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ 	SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
+ 
+@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss
+ 	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ 						    SSB_SPROM1_AGAIN_A,
+ 						    SSB_SPROM1_AGAIN_A_SHIFT);
++	if (out->revision >= 2)
++		sprom_extract_r23(out, in);
+ }
+ 
+ /* Revs 4 5 and 8 have partially shared layout */
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -219,6 +219,7 @@
+ #define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
+ #define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
++#define  SSB_CHIPCO_PMU_CTL_PLL_UPD		0x00000400
+ #define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
+ #define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
+ #define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
+@@ -667,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
+ void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+ 			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
+ void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
+ 
+ #endif /* LINUX_SSB_CHIPCO_H_ */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -289,11 +289,11 @@
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
+-#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_ANTAVAIL		0x005C  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	8
+ #define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0

target/linux/generic/patches-3.9/021-bcma_backport.patch

@@ -0,0 +1,140 @@
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked
+ 	return value;
+ }
+ 
+-static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
++u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
+ {
+ 	if (cc->capabilities & BCMA_CC_CAP_PMU)
+ 		return bcma_pmu_get_alp_clock(cc);
+ 
+ 	return 20000000;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
+ 
+ static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
+ {
+@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
+ 
+ 	return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
+ 
+ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+ {
+@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
+ 
+ 	return res;
+ }
++EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
+ 
+ /*
+  * If the bit is set to 0, chipcommon controlls this GPIO,
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
+ 	struct bcma_bus *bus = cc->core->bus;
+ 
+ 	switch (bus->chipinfo.id) {
++	case BCMA_CHIP_ID_BCM4313:
++	case BCMA_CHIP_ID_BCM43224:
++	case BCMA_CHIP_ID_BCM43225:
++	case BCMA_CHIP_ID_BCM43227:
++	case BCMA_CHIP_ID_BCM43228:
++	case BCMA_CHIP_ID_BCM4331:
++	case BCMA_CHIP_ID_BCM43421:
++	case BCMA_CHIP_ID_BCM43428:
++	case BCMA_CHIP_ID_BCM43431:
+ 	case BCMA_CHIP_ID_BCM4716:
+-	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM47162:
+-	case BCMA_CHIP_ID_BCM4313:
+-	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4748:
+ 	case BCMA_CHIP_ID_BCM4749:
++	case BCMA_CHIP_ID_BCM5357:
+ 	case BCMA_CHIP_ID_BCM53572:
++	case BCMA_CHIP_ID_BCM6362:
+ 		/* always 20Mhz */
+ 		return 20000 * 1000;
+-	case BCMA_CHIP_ID_BCM5356:
+ 	case BCMA_CHIP_ID_BCM4706:
++	case BCMA_CHIP_ID_BCM5356:
+ 		/* always 25Mhz */
+ 		return 25000 * 1000;
++	case BCMA_CHIP_ID_BCM43460:
++	case BCMA_CHIP_ID_BCM4352:
++	case BCMA_CHIP_ID_BCM4360:
++		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
++			return 40000 * 1000;
++		else
++			return 20000 * 1000;
+ 	default:
+ 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+ 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+@@ -373,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
+ 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
+ 
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4331:
+@@ -394,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
+ 						     0x03000a08);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43224:
+@@ -427,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM4716:
+@@ -461,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 						     0x88888815);
+ 		}
+ 
+-		tmp = 3 << 9;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ 		break;
+ 
+ 	case BCMA_CHIP_ID_BCM43227:
+@@ -497,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
+ 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
+ 						     0x88888815);
+ 		}
+-		tmp = 1 << 10;
++		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
+ 		break;
+ 	default:
+ 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -104,6 +104,7 @@
+ #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
+ #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
+ #define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
++#define  BCMA_CC_CHIPST_4360_XTAL_40MZ		0x00000001
+ #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+ #define  BCMA_CC_JCMD_START		0x80000000
+ #define  BCMA_CC_JCMD_BUSY		0x80000000
+@@ -607,6 +608,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
+ 
+ extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
+ 
++extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
++
+ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+ 
+ u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);