OpenWrt/openwrt @ 7f249bf2f58bbf07a8ced64c905ecdbfebd47403

No Description

Gabor Juhos 7f249bf2f5 initial 2.6.26 support		17 years ago
docs	62fc14b715 Update wireless documentation	17 years ago
include	104b3386a2 update to 2.6.25.12	17 years ago
package	e63040663d Allow madwifi devices to be set in monitor mode	17 years ago
scripts	e0a748c051 generate zImage for the ADI Sidewinder, too	17 years ago
target	7f249bf2f5 initial 2.6.26 support	17 years ago
toolchain	f529a37420 surprise :p	17 years ago
tools	14622d5a08 Use mkfwimage from athero.openwrt.net with modification for XS2 devices. Add back in ubiquiti image generation.	17 years ago
.gitignore	daa89fdcfc update svn:ignore and .gitignore	17 years ago
BSDmakefile	f30058fda2 add missing copyright header	19 years ago
Config.in	c9d9f8045c adds missing patch for native toolchain	17 years ago
LICENSE	60c1f0f64d finally move buildroot-ng to trunk	9 years ago
Makefile	4c665e6ca4 large improvement for parallel builds. works without V=99 now and without warnings. tested with -j on an 2x dual core opteron machine	17 years ago
README	6f4854e5e5 add information about the tex4ht requirement for the docs	19 years ago
feeds.conf	4d6ec29824 x-wrt svn repo has moved to http://x-wrt.googlecode.com/svn/trunk/	17 years ago
rules.mk	958c4eac47 Native toolchain does not support -fhonour-copts, do not add it to the TARGET_CFLAGS	17 years ago

		
				README
			
				This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org